i.MX device tree changes for 5.5: - New board support: Netronix E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and OPOS6ULDev. - Correct speed grading fuse settings and add opp-suspend property for i.MX7D device tree. - Move usdhc clocks assignment from SoC to board level DTS for imx7ulp, and use APLL_PFD1 as usdhc's clock source on imx7ulp-evk board. - Add missing cooling device properties for CPUs for i.MX6/7 SoCs. - Add sensor GPIO regulator and assign power supplies for magnetometer for imx6ul-14x14-evk board. - Replace "simple-bus" with "simple-mfd" for ANATOP device for i.MX6/7 SoCs. - Fix DTC W=1 warnings by not using simple-audio-card,dai-link on imx6qdl-gw551x and imx6q-gw54xx board. - Move to use DRM bindings for the Seiko 43WVF1G panel on imx53-qsb. - A series from Frieder Schrempf to support more i.MX6UL/ULL-based SoMs and boards from Kontron Electronics GmbH. - A few patches from Michal Vokáč to enable more devices support on imx6dl-yapp4 board. - A patch series from Philippe Schenker to improve i.MX6/7 Apalis and Colibri board support. - A patch series from Sébastien Szymanski to update i.MX6 APF6/APF6Dev device tree with more devices added and adopting DRM bindings for display. - Random improvements, clean-up and device additions on various boards.