Commit 5ba444f0 authored by Bo Shen's avatar Bo Shen Committed by Andreas Bießmann

ARM: at91: add NAND partition table and index

Add NAND partition table, EK board support boot up NAND flash using
the same NAND partition table

Add Index in this file
Signed-off-by: 's avatarBo Shen <>
Signed-off-by: 's avatarAndreas Bießmann <>
parent e9350d65
Atmel AT91 Evaluation kits
- I. Board mapping & boot media
- II. NAND partition table
- III. watchdog support
I. Board mapping & boot media
......@@ -144,7 +149,21 @@ Environment variables
make sama5d3xek_serialflash_config - use serial flash
II. Watchdog support
II. NAND partition table
All the board support boot from NAND flash will use the following NAND
partition table
0x00000000 - 0x0003FFFF bootstrap (256 KiB)
0x00040000 - 0x000BFFFF u-boot (512 KiB)
0x000C0000 - 0x000FFFFF env (256 KiB)
0x00100000 - 0x0013FFFF env_redundant (256 KiB)
0x00140000 - 0x0017FFFF spare (256 KiB)
0x00180000 - 0x001FFFFF dtb (512 KiB)
0x00200000 - 0x007FFFFF kernel (6 MiB)
0x00800000 - 0xxxxxxxxx rootfs (All left)
III. Watchdog support
For security reasons, the at91 watchdog is running at boot time and,
if deactivated, cannot be used anymore.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment