Commit 95a2d438 authored by Masahiro Yamada's avatar Masahiro Yamada

ARM: uniphier: fix README instruction for updating U-Boot via TFTP

Commit 3cb9abc9 ("ARM: uniphier: update U-Boot file names in
workflow") missed to update these two sentences.  Fix them now.

Replace u-boot-spl-dtb.bin and u-boot-dtb.img with u-boot-spl.bin
and u-boot.img, respectively.
Signed-off-by: 's avatarMasahiro Yamada <yamada.masahiro@socionext.com>
parent d5cf3297
......@@ -80,8 +80,8 @@ Write two files to the NAND device as follows:
- u-boot.img at the offset address 0x00010000
If a TFTP server is available, the images can be easily updated.
Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public
directory, and then run the following command at the U-Boot command line:
Just copy the u-boot-spl.bin and u-boot.img to the TFTP public directory,
and then run the following command at the U-Boot command line:
=> run nandupdate
......@@ -94,8 +94,8 @@ Write two files to the Boot partition 1 of the eMMC device as follows:
- u-boot.img at the offset address 0x00010000
If a TFTP server is available, the images can be easily updated.
Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public
directory, and then run the following command at the U-Boot command line:
Just copy the u-boot-spl.bin and u-boot.img to the TFTP public directory,
and then run the following command at the U-Boot command line:
=> run emmcupdate
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment