Commit a89c33db authored by Wolfgang Denk's avatar Wolfgang Denk

General help message cleanup

Many of the help messages were not really helpful; for example, many
commands that take no arguments would not print a correct synopsis
line, but "No additional help available." which is not exactly wrong,
but not helpful either.

Commit ``Make "usage" messages more helpful.'' changed this
partially. But it also became clear that lots of "Usage" and "Help"
messages (fields "usage" and "help" in struct cmd_tbl_s respective)
were actually redundant.

This patch cleans this up - for example:

Before:
	=> help dtt
	dtt - Digital Thermometer and Thermostat

	Usage:
	dtt         - Read temperature from digital thermometer and thermostat.

After:
	=> help dtt
	dtt - Read temperature from Digital Thermometer and Thermostat

	Usage:
	dtt
Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
parent 94796d85
......@@ -156,7 +156,7 @@ int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
vcimage, 2, 0, do_vcimage,
"loads an image to Display",
"vcimage addr\n"
"vcimage addr"
);
/* EOF EB+MCF-EV123c */
......@@ -131,7 +131,7 @@ U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp,
"Init or Display BMP file",
"init\n - initialize DIU\n"
"addr\n - display bmp at address 'addr'\n"
"addr\n - display bmp at address 'addr'"
);
......
......@@ -97,5 +97,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 3, 0, do_bootstrap,
"program the I2C bootstrap EEPROM",
"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n"
);
"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM"
);
......@@ -191,5 +191,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap,
"program the I2C bootstrap EEPROM",
"<nand|nor> - strap to boot from NAND or NOR flash\n"
);
"<nand|nor> - strap to boot from NAND or NOR flash"
);
......@@ -214,5 +214,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 3, 1, do_bootstrap,
"program the serial device strap",
"wrclk [prom0|prom1] - program the serial device strap\n"
);
"wrclk [prom0|prom1] - program the serial device strap"
);
......@@ -291,7 +291,7 @@ U_BOOT_CMD(
RCONF: Read current eeprom configuration. \n\
-----------------------------------------------\n\
WTEST: Test EEPROM write with predefined values\n\
-----------------------------------------------\n"
);
-----------------------------------------------"
);
#endif /* CONFIG_CMD_EEPROM */
......@@ -331,5 +331,5 @@ U_BOOT_CMD(
l2cache, 2, 1, do_l2cache,
"enable or disable L2 cache",
"[on, off]\n"
" - enable or disable L2 cache\n"
);
" - enable or disable L2 cache"
);
......@@ -291,7 +291,7 @@ U_BOOT_CMD(
RCONF: Read current eeprom configuration. \n\
-----------------------------------------------\n\
WTEST: Test EEPROM write with predefined values\n\
-----------------------------------------------\n"
);
-----------------------------------------------"
);
#endif /* CONFIG_CMD_EEPROM */
......@@ -227,5 +227,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap,
"program the I2C bootstrap EEPROM",
"<nand|nor> - strap to boot from NAND or NOR flash\n"
);
"<nand|nor> - strap to boot from NAND or NOR flash"
);
......@@ -233,25 +233,25 @@ static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
lcd_cls, 1, 1, do_lcd_clear,
"lcd clear display",
NULL
);
""
);
U_BOOT_CMD(
lcd_puts, 2, 1, do_lcd_puts,
"display string on lcd",
"<string> - <string> to be displayed\n"
);
"<string> - <string> to be displayed"
);
U_BOOT_CMD(
lcd_putc, 2, 1, do_lcd_putc,
"display char on lcd",
"<char> - <char> to be displayed\n"
);
"<char> - <char> to be displayed"
);
U_BOOT_CMD(
lcd_cur, 3, 1, do_lcd_cur,
"shift cursor on lcd",
"<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n"
" <count> - 0..31\n"
" <dir> - 0=backward 1=forward\n"
);
" <dir> - 0=backward 1=forward"
);
......@@ -94,8 +94,8 @@ static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
U_BOOT_CMD (
sw2_stat, 1, 1, do_sw_stat,
"show status of switch 2",
NULL
);
""
);
static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
{
......@@ -134,8 +134,8 @@ U_BOOT_CMD (
led_ctl, 3, 1, do_led_ctl,
"make led 1 or 2 on or off",
"<led_no> <on/off> - make led <led_no> on/off,\n"
"\tled_no is 1 or 2\t"
);
"\tled_no is 1 or 2"
);
#define SPI_CS_GPIO0 0
#define SPI_SCLK_GPIO14 14
......
......@@ -128,5 +128,5 @@ static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[]
U_BOOT_CMD (
update_boot_eeprom, 1, 1, update_boot_eeprom,
"update boot eeprom content",
NULL
);
""
);
......@@ -254,18 +254,18 @@ static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return 0;
}
U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", NULL);
U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", NULL);
U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", "");
U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", "");
U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts,
"display string on lcd",
"<string> - <string> to be displayed\n");
"<string> - <string> to be displayed");
U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc,
"display char on lcd",
"<char> - <char> to be displayed\n");
"<char> - <char> to be displayed");
U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur,
"shift cursor on lcd",
"<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n"
" <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n");
" <count> - 0~31\n" " <dir> - 0,backward; 1, forward");
#if 0 /* test-only */
void set_phy_loopback_mode(void)
......@@ -373,8 +373,8 @@ static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(ledon, 1, 1, do_led_test_on,
"led test light on", NULL);
"led test light on", "");
U_BOOT_CMD(ledoff, 1, 1, do_led_test_off,
"led test light off", NULL);
"led test light off", "");
#endif
......@@ -168,7 +168,7 @@ int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info,
"Show PCIX bridge info", NULL);
"Show PCIX bridge info", "");
#define TAISHAN_PCI_DEV_ID0 0x800
#define TAISHAN_PCI_DEV_ID1 0x1000
......@@ -222,7 +222,7 @@ int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc,
}
U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info,
"Show PCIX Device info", NULL);
"Show PCIX Device info", "");
extern void show_reset_reg(void);
......@@ -233,4 +233,4 @@ int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info,
"Show Reset REG info", NULL);
"Show Reset REG info", "");
......@@ -74,5 +74,5 @@ int do_update_boot_eeprom(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom,
"update bootstrap eeprom content", NULL);
"update bootstrap eeprom content", "");
#endif
......@@ -282,5 +282,5 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
U_BOOT_CMD(
evb440spe, 3, 1, do_evb440spe,
"program the serial device strap",
"wrclk [prom0|prom1] - program the serial device strap\n"
"wrclk [prom0|prom1] - program the serial device strap"
);
......@@ -670,14 +670,14 @@ U_BOOT_CMD (temp, 6, 0, do_temp_sensor,
" - Set config options.\n"
"\n"
"All values can be decimal or hex (hex preceded with 0x).\n"
"Only whole numbers are supported for external limits.\n");
"Only whole numbers are supported for external limits.");
#if 0
U_BOOT_CMD (loadace, 2, 0, do_loadace,
"load fpga configuration from System ACE compact flash",
"N\n"
" - Load configuration N (0-7) from System ACE compact flash\n"
"loadace\n" " - loads default configuration\n");
"loadace\n" " - loads default configuration");
#endif
U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
......@@ -685,19 +685,19 @@ U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
"N [ADDRESS]\n"
" - set software configuration byte to N, optionally use ADDRESS as\n"
" location of buffer for flash copy\n"
"swconfig\n" " - display software configuration byte\n");
"swconfig\n" " - display software configuration byte");
U_BOOT_CMD (pause, 2, 0, do_pause,
"sleep processor until any key is pressed with poll time of N seconds",
"N\n"
" - sleep processor until any key is pressed with poll time of N seconds\n"
"pause\n"
" - sleep processor until any key is pressed with poll time of 1 second\n");
" - sleep processor until any key is pressed with poll time of 1 second");
U_BOOT_CMD (swrecon, 1, 0, do_swreconfig,
"trigger a board reconfigure to the software selected configuration",
"\n"
" - trigger a board reconfigure to the software selected configuration\n");
" - trigger a board reconfigure to the software selected configuration");
int board_eth_init(bd_t *bis)
{
......
......@@ -487,7 +487,7 @@ U_BOOT_CMD (eeprom, 4, 0, do_eeprom,
" - store contents of eeprom at address ADD\n"
"eeprom p ADD\n"
" - put data stored at address ADD into the eeprom\n"
"eeprom d\n" " - return eeprom to default contents\n");
"eeprom d\n" " - return eeprom to default contents");
unsigned int PowerSpanRead (unsigned int theOffset)
{
......
......@@ -307,19 +307,19 @@ int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (
try_working, 1, 1, barcobcd_boot_image,
"check flash value and boot the appropriate image",
"\n"
""
);
U_BOOT_CMD (
boot_working, 1, 1, barcobcd_boot_image,
"check flash value and boot the appropriate image",
"\n"
""
);
U_BOOT_CMD (
boot_default, 1, 1, barcobcd_boot_image,
"check flash value and boot the appropriate image",
"\n"
""
);
/*
* We are not using serial communication, so just provide empty functions
......
......@@ -198,7 +198,7 @@ U_BOOT_CMD (dip, 1, 1, cmd_dip,
"\n"
" - prints the state of the dip switch and/or\n"
" external configuration inputs as hex value.\n"
" - \"Config 1\" is the LSB\n");
" - \"Config 1\" is the LSB");
/*
......@@ -229,7 +229,7 @@ static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (buz, 2, 1, cmd_buz,
"turns buzzer on/off",
"\n" "buz <on/off>\n" " - turns the buzzer on or off\n");
"\n" "buz <on/off>\n" " - turns the buzzer on or off");
#endif /* CONFIG_BC3450_BUZZER */
......@@ -326,14 +326,14 @@ U_BOOT_CMD (fp, 3, 1, cmd_fp,
"\n"
"fp bl <on/off>\n"
" - turns the CCFL backlight of the display on/off\n"
"fp <on/off>\n" " - turns the whole display on/off\n"
"fp <on/off>\n" " - turns the whole display on/off"
#ifdef CONFIG_BC3450_CRT
"\n"
"fp crt <on/off>\n"
" - enables/disables the crt output (debug only)\n"
" - enables/disables the crt output (debug only)"
#endif /* CONFIG_BC3450_CRT */
);
/*
* temp - DS1620 thermometer
*/
......@@ -524,7 +524,7 @@ static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (temp, 3, 1, cmd_temp,
"print current temperature",
"\n" "temp\n" " - print current temperature\n");
"\n" "temp\n" " - print current temperature");
#ifdef CONFIG_BC3450_CAN
/*
......@@ -818,10 +818,11 @@ int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n"
#ifdef CONFIG_BC3450_CAN
"test can\n"
" - connect CAN1 (X8) with CAN2 (X9) for this test\n"
"test can\n"
" - connect CAN1 (X8) with CAN2 (X9) for this test\n"
#endif /* CONFIG_BC3450_CAN */
"test unit-off\n"
" - turns off the BC3450 unit\n"
" WARNING: Unsaved environment variables will be lost!\n");
"test unit-off\n"
" - turns off the BC3450 unit\n"
" WARNING: Unsaved environment variables will be lost!"
);
#endif
......@@ -33,7 +33,7 @@
"led <number> <action>\n" \
" <number> - Index (0-5) of LED to change, or \"all\"\n" \
" <action> - Must be one of:\n" \
" on off toggle\n"
" on off toggle"
/* Number of LEDs supported by the board */
#define NUMBER_LEDS 6
......@@ -191,7 +191,7 @@ void set_led_state(int index, int state)
/* Display usage information */
void show_cmd_usage()
{
printf("Usage:\n%s", USAGE_LONG);
printf("Usage:\n%s\n", USAGE_LONG);
}
/* Register information for u-boot to find this command */
......
......@@ -443,6 +443,6 @@ U_BOOT_CMD(
"fkt rs232 number\n"
" - Test RS232 (loopback plug(s) for RS232 required)\n"
"fkt usb\n"
" - Test USB communication\n"
" - Test USB communication"
);
#endif /* CONFIG_CMD_BSP */
......@@ -260,7 +260,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
NULL
""
);
#endif /* DELTA_CHECK_KEYBD */
......
......@@ -247,9 +247,8 @@ int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
digtest, 3, 1, do_digtest,
"Test digital in-/output",
NULL
);
""
);
#define ERROR_DELTA 256
......@@ -341,8 +340,8 @@ int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
anatest, 2, 1, do_anatest,
"Test analog in-/output",
NULL
);
""
);
int counter = 0;
......@@ -408,6 +407,6 @@ int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
inctest, 3, 1, do_inctest,
"Test incremental encoder inputs",
NULL
);
""
);
#endif
......@@ -189,8 +189,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
NULL);
"Enable / disable / query EEPROM write access",
""
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
/* ------------------------------------------------------------------------- */
......
......@@ -551,6 +551,6 @@ int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
autoupd, 1, 1, auto_update,
"Automatically update images",
NULL
""
);
#endif /* CONFIG_AUTO_UPDATE */
......@@ -124,7 +124,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
"Wait for pci bootcmd and boot it",
NULL
);
""
);
#endif
......@@ -373,5 +373,5 @@ int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
esdbmp, 2, 1, do_esdbmp,
"display BMP image",
"<imageAddr> - display image\n"
"<imageAddr> - display image"
);
......@@ -1869,4 +1869,4 @@ U_BOOT_CMD(
cpld, 2, 1, do_cpld,
"program onboard CPLD",
"<xsvf-addr>"
);
);
......@@ -183,6 +183,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
NULL
);
""
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
......@@ -690,8 +690,8 @@ int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
onewire, 1, 1, do_onewire,
"Read 1-write ID",
NULL
);
""
);
#define CONFIG_SYS_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT24WC32 */
#define CONFIG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars */
......@@ -751,8 +751,8 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
getbpip, 1, 1, do_get_bpip,
"Update IP-Address with Backplane IP-Address",
NULL
);
""
);
/*
* Set and print backplane ip...
......@@ -787,7 +787,7 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
setbpip, 2, 1, do_set_bpip,
"Write Backplane IP-Address",
NULL
);
""
);
#endif /* CONFIG_CPCI405AB */
......@@ -295,4 +295,6 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(writepci, 3, 1, do_writepci,
"Write some data to pcibus",
"<addr> <size>\n" " - Write some data to pcibus.\n");
"<addr> <size>\n"
""
);
......@@ -994,5 +994,5 @@ int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
show_config, 1, 1, do_show_config,
"Show Marvell strapping register",
"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n"
);
"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)"
);
......@@ -230,7 +230,7 @@ U_BOOT_CMD(
pci9054, 3, 1, do_pci9054,
"PLX PCI9054 EEPROM access",
"pci9054 info - print EEPROM values\n"
"pci9054 update - updates EEPROM with default values\n"
"pci9054 update - updates EEPROM with default values"
);
/* ------------------------------------------------------------------------- */
......@@ -607,8 +607,8 @@ int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dcf77, 1, 1, do_dcf77,
"Check DCF77 receiver",
NULL
);
""
);
/*
* initialize USB hub via I2C1
......@@ -657,8 +657,8 @@ int do_hubinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
hubinit, 1, 1, do_hubinit,
"Initialize USB hub",
NULL
);
""
);
#endif /* CONFIG_I2C_MULTI_BUS */
#define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3
......@@ -790,8 +790,8 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
sbe, 2, 0, do_setup_boot_eeprom,
"setup boot eeprom",
NULL
);
""
);
#if defined(CONFIG_SYS_EEPROM_WREN)
/*
......@@ -863,8 +863,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
NULL);
"Enable / disable / query EEPROM write access",
""
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
static int got_pldirq;
......@@ -916,8 +917,8 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
wpi, 1, 1, do_waitpwrirq,
"Wait for power change interrupt",
NULL
);
""
);
/*
* initialize DVI panellink transmitter
......@@ -961,8 +962,8 @@ int do_dviinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dviinit, 1, 1, do_dviinit,
"Initialize DVI Panellink transmitter",
NULL
);
""
);
/*
* TODO: 'time' command might be useful for others as well.
......@@ -1001,8 +1002,8 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
time, CONFIG_SYS_MAXARGS, 1, do_time,
"run command and output execution time",
NULL
);
""
);
extern void video_hw_rectfill (
unsigned int bpp, /* bytes per pixel */
......@@ -1051,5 +1052,5 @@ int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
gfxdemo, CONFIG_SYS_MAXARGS, 1, do_gfxdemo,
"demo",
NULL
);
""
);
......@@ -769,8 +769,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
NULL);
"Enable / disable / query EEPROM write access",
""
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
......
......@@ -55,7 +55,7 @@ int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
setdevice, 1, 1, do_setdevice,
"Set device number on pci adapter boards",
NULL
""
);
......@@ -78,7 +78,7 @@ int do_getdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
getdevice, 1, 1, do_getdevice,
"Get device number and set slot env variable",
NULL
""
);
#endif
......@@ -109,6 +109,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
"Wait for pci-image and boot it",
NULL
""
);
#endif
......@@ -381,5 +381,5 @@ U_BOOT_CMD(
"wpeeprom 1\n"
" - enable I2C EEPROM write protection\n"
"wpeeprom 0\n"
" - disable I2C EEPROM write protection\n"
);
" - disable I2C EEPROM write protection"
);
......@@ -294,7 +294,7 @@ int do_poweroff(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return (0);
}
U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", NULL);
U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", "");
int phypower(int flag)
{
......@@ -338,7 +338,7 @@ int do_phypower(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(phypower, 2, 2, do_phypower,
"Switch power of ethernet phy", NULL);
"Switch power of ethernet phy", "");
int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])