Commit add63f94 authored by Prabhakar Kushwaha's avatar Prabhakar Kushwaha Committed by York Sun

arch: powerpc: update the eLBC IP input clock

eLBC IP clock is always a constant divisor of platform clock
pre-defined per SoC. Clock ratio register (LCRR) used in
current implementation governs eLBC IP output cloc.

Update sys_info->freq_localbus to represent eLBC input clock with
value constant divisor of platform clock.
Signed-off-by: default avatarPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: default avatarYork Sun <york.sun@nxp.com>
parent 06878977
......@@ -507,6 +507,9 @@ The following options need to be configured:
CONFIG_SYS_FSL_IFC_CLK_DIV
Defines divider of platform clock(clock input to IFC controller).
CONFIG_SYS_FSL_LBC_CLK_DIV
Defines divider of platform clock(clock input to eLBC controller).
CONFIG_SYS_FSL_PBL_PBI
It enables addition of RCW (Power on reset configuration) in built image.
Please refer doc/README.pblimage for more details
......
......@@ -1337,6 +1337,24 @@ config SYS_FSL_IFC_CLK_DIV
Defines divider of platform clock(clock input to
IFC controller).
config SYS_FSL_LBC_CLK_DIV
int "Divider of platform clock"
depends on FSL_ELBC || ARCH_MPC8540 || \
ARCH_MPC8548 || ARCH_MPC8541 || \
ARCH_MPC8555 || ARCH_MPC8560 || \
ARCH_MPC8568
default 2 if ARCH_P2041 || \
ARCH_P3041 || \
ARCH_P4080 || \
ARCH_P5020 || \
ARCH_P5040
default 1
help
Defines divider of platform clock(clock input to
eLBC controller).
source "board/freescale/b4860qds/Kconfig"
source "board/freescale/bsc9131rdb/Kconfig"
source "board/freescale/bsc9132qds/Kconfig"
......
......@@ -607,32 +607,8 @@ void get_sys_info(sys_info_t *sys_info)
#endif /* CONFIG_FSL_CORENET */
#if defined(CONFIG_FSL_LBC)
uint lcrr_div;
#if defined(CONFIG_SYS_LBC_LCRR)
/* We will program LCRR to this value later */
lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
#else
lcrr_div = in_be32(&(LBC_BASE_ADDR)->lcrr) & LCRR_CLKDIV;
#endif
if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
#if defined(CONFIG_FSL_CORENET)
/* If this is corenet based SoC, bit-representation
* for four times the clock divider values.
*/
lcrr_div *= 4;
#elif !defined(CONFIG_ARCH_MPC8540) && !defined(CONFIG_ARCH_MPC8541) && \
!defined(CONFIG_ARCH_MPC8555) && !defined(CONFIG_ARCH_MPC8560)
/*
* Yes, the entire PQ38 family use the same
* bit-representation for twice the clock divider values.
*/
lcrr_div *= 2;
#endif
sys_info->freq_localbus = sys_info->freq_systembus / lcrr_div;
} else {
/* In case anyone cares what the unknown value is */
sys_info->freq_localbus = lcrr_div;
}
sys_info->freq_localbus = sys_info->freq_systembus /
CONFIG_SYS_FSL_LBC_CLK_DIV;
#endif
#if defined(CONFIG_FSL_IFC)
......
......@@ -24,7 +24,6 @@ void get_sys_info(sys_info_t *sys_info)
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile ccsr_gur_t *gur = &immap->im_gur;
uint plat_ratio, e600_ratio;
uint lcrr_div;
plat_ratio = (gur->porpllsr) & 0x0000003e;
plat_ratio >>= 1;
......@@ -78,19 +77,7 @@ void get_sys_info(sys_info_t *sys_info)
break;
}
#if defined(CONFIG_SYS_LBC_LCRR)
/* We will program LCRR to this value later */
lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
#else
lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV;
#endif
if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
sys_info->freq_localbus = sys_info->freq_systembus
/ (lcrr_div * 2);
} else {
/* In case anyone cares what the unknown value is */
sys_info->freq_localbus = lcrr_div;
}
sys_info->freq_localbus = sys_info->freq_systembus;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment