1. 06 Feb, 2016 1 commit
  2. 19 Jan, 2016 1 commit
  3. 19 Oct, 2015 2 commits
    • Paul Gortmaker's avatar
      sbc8641d: increase monitor size from 256k to 384k · ecdc3df6
      Paul Gortmaker authored
      Between v2015.07-rc1 and v2015.07-rc2 this board started
      silent boot failure.  A bisect led to commit 6eed3786
      ("net: Move the CMD_NET config to defconfigs").  This commit
      looks harmless in itself, but it did implicitly add a feature
      to the image which led to this:
      
       u-boot$git describe 6eed3786
       v2015.07-rc1-412-g6eed3786
                    ^^^
      
       u-boot$ls -l ../41*/u-boot.bin
       -rwxrwxr-x 1 paul paul 261476 Oct 16 16:47 ../411/u-boot.bin
       -rwxrwxr-x 1 paul paul 266392 Oct 16 16:43 ../412/u-boot.bin
       u-boot$bc
       bc 1.06.95
       Copyright 1991-1994, 1997, 1998, 2000, 2004, 2006 Free Software Foundation, Inc.
       This is free software with ABSOLUTELY NO WARRANTY.
       For details type `warranty'.
       256*1024
       262144
      
      i.e. we finally broke through the 256k monitor size.  Jump it
      up to 384k and fix the hard coded value used in the env offset
      at the same time.
      
      We were probably flirting with the 256k size issue without
      knowing it when testing on different baselines in earlier
      commits, but since this is all board specific, a rebase or
      reorder to put this commit 1st is of little value.
      Signed-off-by: 's avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      ecdc3df6
    • Paul Gortmaker's avatar
      sbc8641d: add basic flash setup instructions to README file · 743d7592
      Paul Gortmaker authored
      ...so that I don't have to go work them out from scratch again
      by peering at the manual.
      Signed-off-by: 's avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      743d7592
  4. 21 Nov, 2014 1 commit
    • Simon Glass's avatar
      fdt: Allow ft_board_setup() to report failure · e895a4b0
      Simon Glass authored
      This function can fail if the device tree runs out of space. Rather than
      silently booting with an incomplete device tree, allow the failure to be
      detected.
      
      Unfortunately this involves changing a lot of places in the code. I have
      not changed behvaiour to return an error where one is not currently
      returned, to avoid unexpected breakage.
      
      Eventually it would be nice to allow boards to register functions to be
      called to update the device tree. This would avoid all the many functions
      to do this. However it's not clear yet if this should be done using driver
      model or with a linker list. This work is left for later.
      Signed-off-by: 's avatarSimon Glass <sjg@chromium.org>
      Acked-by: 's avatarAnatolij Gustschin <agust@denx.de>
      e895a4b0
  5. 13 Sep, 2014 1 commit
  6. 30 Jul, 2014 2 commits
    • Masahiro Yamada's avatar
      Add board MAINTAINERS files · 93d4334f
      Masahiro Yamada authored
      We have switched to Kconfig and the boards.cfg file is going to
      be removed. We have to retrieve the board status and maintainers
      information from it.
      
      The MAINTAINERS format as in Linux Kernel would be nice
      because we can crib the scripts/get_maintainer.pl script.
      
      After some discussion, we chose to put a MAINTAINERS file under each
      board directory, not the top-level one because we want to collect
      relevant information for a board into a single place.
      
      TODO:
      Modify get_maintainer.pl to scan multiple MAINTAINERS files.
      Signed-off-by: 's avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Suggested-by: 's avatarTom Rini <trini@ti.com>
      Acked-by: 's avatarSimon Glass <sjg@chromium.org>
      93d4334f
    • Masahiro Yamada's avatar
      kconfig: add board Kconfig and defconfig files · dd84058d
      Masahiro Yamada authored
      This commit adds:
       - arch/${ARCH}/Kconfig
          provide a menu to select target boards
       - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
          set CONFIG macros to the appropriate values for each board
       - configs/${TARGET_BOARD}_defconfig
          default setting of each board
      
      (This commit was automatically generated by a conversion script
      based on boards.cfg)
      
      In Linux Kernel, defconfig files are located under
      arch/${ARCH}/configs/ directory.
      It works in Linux Kernel since ARCH is always given from the
      command line for cross compile.
      
      But in U-Boot, ARCH is not given from the command line.
      Which means we cannot know ARCH until the board configuration is done.
      That is why all the "*_defconfig" files should be gathered into a
      single directory ./configs/.
      Signed-off-by: 's avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Acked-by: 's avatarSimon Glass <sjg@chromium.org>
      dd84058d
  7. 25 Nov, 2013 2 commits
  8. 01 Nov, 2013 1 commit
  9. 14 Oct, 2013 1 commit
  10. 24 Jul, 2013 1 commit
  11. 29 Jul, 2012 1 commit
  12. 15 Oct, 2011 1 commit
  13. 29 Jul, 2011 1 commit
  14. 04 Apr, 2011 3 commits
  15. 14 Jan, 2011 3 commits
  16. 17 Nov, 2010 1 commit
    • Sebastien Carlier's avatar
      Switch from archive libraries to partial linking · 6d8962e8
      Sebastien Carlier authored
      Before this commit, weak symbols were not overridden by non-weak symbols
      found in archive libraries when linking with recent versions of
      binutils.  As stated in the System V ABI, "the link editor does not
      extract archive members to resolve undefined weak symbols".
      
      This commit changes all Makefiles to use partial linking (ld -r) instead
      of creating library archives, which forces all symbols to participate in
      linking, allowing non-weak symbols to override weak symbols as intended.
      This approach is also used by Linux, from which the gmake function
      cmd_link_o_target (defined in config.mk and used in all Makefiles) is
      inspired.
      
      The name of each former library archive is preserved except for
      extensions which change from ".a" to ".o".  This commit updates
      references accordingly where needed, in particular in some linker
      scripts.
      
      This commit reveals board configurations that exclude some features but
      include source files that depend these disabled features in the build,
      resulting in undefined symbols.  Known such cases include:
      - disabling CMD_NET but not CMD_NFS;
      - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.
      Signed-off-by: 's avatarSebastien Carlier <sebastien.carlier@gmail.com>
      6d8962e8
  17. 14 Nov, 2010 1 commit
    • Peter Tyser's avatar
      fsl: Clean up printing of PCI boot info · 8ca78f2c
      Peter Tyser authored
      Previously boards used a variety of indentations, newline styles, and
      colon styles for the PCI information that is printed on bootup.  This
      patch unifies the style to look like:
      
      ...
      NAND:  1024 MiB
      PCIE1: connected as Root Complex
                 Scanning PCI bus 01
              04  01  8086  1010  0200  00
              04  01  8086  1010  0200  00
              03  00  10b5  8112  0604  00
              02  01  10b5  8518  0604  00
              02  02  10b5  8518  0604  00
              08  00  1957  0040  0b20  00
              07  00  10b5  8518  0604  00
              09  00  10b5  8112  0604  00
              07  01  10b5  8518  0604  00
              07  02  10b5  8518  0604  00
              06  00  10b5  8518  0604  00
              02  03  10b5  8518  0604  00
              01  00  10b5  8518  0604  00
      PCIE1: Bus 00 - 0b
      PCIE2: connected as Root Complex
                 Scanning PCI bus 0d
              0d  00  1957  0040  0b20  00
      PCIE2: Bus 0c - 0d
      In:    serial
      ...
      Signed-off-by: 's avatarPeter Tyser <ptyser@xes-inc.com>
      CC: wd@denx.de
      CC: sr@denx.de
      CC: galak@kernel.crashing.org
      8ca78f2c
  18. 20 Oct, 2010 2 commits
  19. 18 Oct, 2010 2 commits
    • Wolfgang Denk's avatar
      Makefile: move all Power Architecture boards into boards.cfg · 2ae18241
      Wolfgang Denk authored
      Clean up Makefile, and drop a lot of the config.mk files on the way.
      
      We now also automatically pick all boards that are listed in
      boards.cfg (and with all configurations), so we can drop the redundant
      entries from MAKEALL to avoid building these twice.
      Signed-off-by: 's avatarWolfgang Denk <wd@denx.de>
      2ae18241
    • Wolfgang Denk's avatar
      Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE · 14d0a02a
      Wolfgang Denk authored
      The change is currently needed to be able to remove the board
      configuration scripting from the top level Makefile and replace it by
      a simple, table driven script.
      
      Moving this configuration setting into the "CONFIG_*" name space is
      also desirable because it is needed if we ever should move forward to
      a Kconfig driven configuration system.
      Signed-off-by: 's avatarWolfgang Denk <wd@denx.de>
      14d0a02a
  20. 20 Jul, 2010 3 commits
  21. 21 Apr, 2010 1 commit
  22. 13 Apr, 2010 3 commits
  23. 05 Nov, 2009 1 commit
  24. 16 Oct, 2009 1 commit
  25. 03 Oct, 2009 1 commit
    • Peter Tyser's avatar
      ppc: Enable full relocation to RAM · 85829017
      Peter Tyser authored
      The following changes allow U-Boot to fully relocate from flash to
      RAM:
       - Remove linker scripts' .fixup sections from the .text section
       - Add -mrelocatable to PLATFORM_RELFLAGS for all boards
       - Define CONFIG_RELOC_FIXUP_WORKS for all boards
      
      Previously, U-Boot would partially relocate, but statically initialized
      pointers needed to be manually relocated.
      Signed-off-by: 's avatarPeter Tyser <ptyser@xes-inc.com>
      85829017
  26. 28 Aug, 2009 2 commits