1. 01 Nov, 2013 1 commit
  2. 24 Jul, 2013 1 commit
  3. 15 Oct, 2011 1 commit
  4. 21 Jun, 2011 1 commit
  5. 17 Nov, 2010 1 commit
    • Sebastien Carlier's avatar
      Switch from archive libraries to partial linking · 6d8962e8
      Sebastien Carlier authored
      Before this commit, weak symbols were not overridden by non-weak symbols
      found in archive libraries when linking with recent versions of
      binutils.  As stated in the System V ABI, "the link editor does not
      extract archive members to resolve undefined weak symbols".
      
      This commit changes all Makefiles to use partial linking (ld -r) instead
      of creating library archives, which forces all symbols to participate in
      linking, allowing non-weak symbols to override weak symbols as intended.
      This approach is also used by Linux, from which the gmake function
      cmd_link_o_target (defined in config.mk and used in all Makefiles) is
      inspired.
      
      The name of each former library archive is preserved except for
      extensions which change from ".a" to ".o".  This commit updates
      references accordingly where needed, in particular in some linker
      scripts.
      
      This commit reveals board configurations that exclude some features but
      include source files that depend these disabled features in the build,
      resulting in undefined symbols.  Known such cases include:
      - disabling CMD_NET but not CMD_NFS;
      - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.
      Signed-off-by: default avatarSebastien Carlier <sebastien.carlier@gmail.com>
      6d8962e8
  6. 06 Jun, 2010 1 commit
    • Asen Dimov's avatar
      add new board pm9g45 · b5d289fc
      Asen Dimov authored
      Add the new board PM9G45 from Ronetix GmbH.
      * AT91SAM9G45 MCU at 400Mhz.
      * 128MB DDR2 SDRAM
      * 256MB NAND
      * 10/100 MBits Ethernet DP83848
      * Serial number chip DS2401
      
      The board is made as SODIMM200 module.
      For more info www.ronatix.at or info@ronetix.at.
      Signed-off-by: default avatarAsen Dimov <dimov@ronetix.at>
      b5d289fc
  7. 12 Jul, 2009 1 commit
    • Sedji Gaouaou's avatar
      at91: Introduction of at91sam9g45 SOC. · 22ee6473
      Sedji Gaouaou authored
      AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
      It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of
      peripherals.
      
      The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES.
      On the board you can find 2 USART, USB high speed,
      a 480*272 LG lcd, ethernet, gpio/joystick/buttons.
      Signed-off-by: default avatarSedji Gaouaou <sedji.gaouaou@atmel.com>
      22ee6473
  8. 06 Jul, 2009 1 commit
  9. 22 Mar, 2009 2 commits
  10. 02 Jul, 2008 1 commit
  11. 10 May, 2008 3 commits
  12. 09 May, 2008 1 commit
    • Stelian Pop's avatar
      Fix @ -> <at> substitution · cce9cfda
      Stelian Pop authored
      When applying the AT91CAP9 patches upstream, something transformed
      the '@' character into the ' <at> ' sequence.
      
      The patch below restores the original form in all the places where
      it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
      were copied from AT91CAP9, and a couple of other files where the
      ' <at> ' sequence was present).
      Signed-off-by: default avatarStelian Pop <stelian@popies.net>
      cce9cfda
  13. 08 May, 2008 1 commit
  14. 18 Apr, 2008 1 commit
    • Ulf Samuelsson's avatar
      Clean up dataflash partitioning · c3a60cb3
      Ulf Samuelsson authored
      This patch removes the board dependent parts from
      "drivers/mtd/dataflash.c".
      Each board relying on this, will have the appropriate
      code in a new file, "partition.c" in the board directory.
      board Makefiles updated to use the file.
      
      The dataflash partitions are aligned on sector/page boundaries.
      
      The CONFIG_NEW_DF_PARTITION was used to create named partitions
      This is now the default operation, and the CONFIG variable is removed.
      Signed-off-by: default avatarUlf Samuelsson <ulf@atmel.com>
      c3a60cb3
  15. 31 Mar, 2008 3 commits
  16. 14 Feb, 2008 2 commits
  17. 08 Oct, 2006 1 commit
  18. 01 Sep, 2006 1 commit
    • Marian Balakowicz's avatar
      Add support for a saving build objects in a separate directory. · f9328639
      Marian Balakowicz authored
      Modifications are based on the linux kernel approach and
      support two use cases:
      
        1) Add O= to the make command line
        'make O=/tmp/build all'
      
        2) Set environement variable BUILD_DIR to point to the desired location
        'export BUILD_DIR=/tmp/build'
        'make'
      
      The second approach can also be used with a MAKEALL script
      'export BUILD_DIR=/tmp/build'
      './MAKEALL'
      
      Command line 'O=' setting overrides BUILD_DIR environent variable.
      
      When none of the above methods is used the local build is performed and
      the object files are placed in the source directory.
      f9328639
  19. 19 May, 2005 1 commit
  20. 14 Oct, 2003 1 commit
    • wdenk's avatar
      * Make sure HUSH is initialized for running auto-update scripts · 2d5b561e
      wdenk authored
      * Make 5200 reset command _really_ reset the board, without running
        any other code after it
      
      * Fix flash mapping and display on P3G4 board
      
      * Patch by Kyle Harris, 15 Jul 2003:
        - add support for Intel IXP425 CPU
        - add support for IXDP425 eval board
      2d5b561e
  21. 19 Jun, 2003 1 commit
    • wdenk's avatar
      Patches by Robert Schwebel, 14 Jun 2003: · 52f52c14
      wdenk authored
      - add support for Logotronic DL datalogger board
      - cleanup serial line after kermit binary download
      - add debugX macro (debug level support)
      - update mach-types.h to latest arm.linux.org.uk master list.
      52f52c14
  22. 10 Sep, 2002 1 commit
  23. 01 Mar, 2001 1 commit
  24. 11 Jan, 2001 1 commit
  25. 14 Dec, 2000 1 commit
  26. 10 Jul, 2000 1 commit