OS-issues issueshttps://source.puri.sm/Librem5/OS-issues/-/issues2020-10-01T07:58:15Zhttps://source.puri.sm/Librem5/OS-issues/-/issues/165Switch to bluetooth headset if paired2020-10-01T07:58:15ZGuido GuntherSwitch to bluetooth headset if pairedSimilar to HP detection we should switch to bluetooth headset if paired (and switch back to speaker or headset once disabled).Similar to HP detection we should switch to bluetooth headset if paired (and switch back to speaker or headset once disabled).Evghttps://source.puri.sm/Librem5/OS-issues/-/issues/145MMS breaks receiving messages from the sender.2021-06-26T12:54:08ZDavid HamnerMMS breaks receiving messages from the sender.It seems if someone sends you an image via text, you can no longer receive messages from that person. But you can still send them messages.
Step to reproduce:
* Verify you can text someone
* Send an image via MMS to the Librem 5
No me...It seems if someone sends you an image via text, you can no longer receive messages from that person. But you can still send them messages.
Step to reproduce:
* Verify you can text someone
* Send an image via MMS to the Librem 5
No message will be received for the MMS, and no subsequent messages will be received.Evghttps://source.puri.sm/Librem5/OS-issues/-/issues/104Dynamically manage audio routing2020-11-12T14:39:25ZBob HamDynamically manage audio routingSomething is needed to manage audio routing according to policies specified both statically and by user configuration. A preliminary set of use cases is as follows:
* Ring tones and notification sounds should play through the speakerph...Something is needed to manage audio routing according to policies specified both statically and by user configuration. A preliminary set of use cases is as follows:
* Ring tones and notification sounds should play through the speakerphone and not the earpiece.
* Call audio should be switchable between the speakerphone and earpiece.
* Media playback, notification sounds and call audio should be routed to a Bluetooth headset when one is connected.
* Media playback should be muted when a call comes in.
* While using turn-by-turn navigation, the navigation audio should be reduced in volume or muted when a call comes in.
* Audio routing policy should integrate with other feedback settings (#87)
Related issues:
* #103
* #87
* Apps_Issues#60
* calls#43
* calls#101
* gnome-clocks#18
Prior art:
* Automotive Grade Linux
* Advanced Audio Architecture: https://docs.automotivelinux.org/docs/en/guppy/apis_services/reference/audio/4a-framework/README.html
* WirePlumber: https://fosdem.org/2020/schedule/event/ema_pipewire/
* GENIVI
* GENIVI Audio Manager: https://at.projects.genivi.org/wiki/display/PROJ/Audio+Manager
* Tizen:
* Murphy: https://01.org/murphy https://github.com/intel/murphy
* Murphy and GENIVI Audio Manager: https://wiki.tizen.org/IVI/Genivi_Audio_Manager_%26_Murphy_Demo
* Audio Framework: https://developer.tizen.org/development/guides/native-application/media-and-camera/sound-manager?langswitch=en
* Mer (/Meego/Maemo/Sailfish/Nemo Mobile)
* Pulseaudio modules: https://github.com/nemomobile?utf8=%E2%9C%93&q=pulseaudio https://git.sailfishos.org/mer-core?utf8=%E2%9C%93&filter=pulseaudio
* ChromeOS
* Chromium OS Audio Server: https://www.chromium.org/chromium-os/chromiumos-design-docs/cras-chromeos-audio-server
Pulseaudio mailing list feedback:
https://lists.freedesktop.org/archives/pulseaudio-discuss/2019-December/031563.htmlEvgSebastian KrzyszkowiakSebastian Krzyszkowiakhttps://source.puri.sm/Librem5/OS-issues/-/issues/84Language selection doesn't work2022-06-03T20:29:34ZDorota CzaplejewiczLanguage selection doesn't workSwitching the language only changes the language inside the initial setup window, but doesn't affect the system. A restart doesn't fix this.
I'm not sure exactly where to look, but:
```
$ env | grep LANG
LANG=C.UTF-8
```Switching the language only changes the language inside the initial setup window, but doesn't affect the system. A restart doesn't fix this.
I'm not sure exactly where to look, but:
```
$ env | grep LANG
LANG=C.UTF-8
```Evg++https://source.puri.sm/Librem5/OS-issues/-/issues/344irregular/vulnerable? early usb serial behavior2023-11-14T13:44:03Zinxirregular/vulnerable? early usb serial behaviorThe librem 5 allows login over a serial usb connection, using a user account on the phone.
However, with repeated connection attempts during early boot it's possible to eventually get into the device before it seems to have properly ini...The librem 5 allows login over a serial usb connection, using a user account on the phone.
However, with repeated connection attempts during early boot it's possible to eventually get into the device before it seems to have properly initialized, and one sees (without doing anything!) what seems to be AT (modem?) commands getting printed into the session, and causing errors:
```
$ picocom -b 115200 /dev/ttyACM0
picocom v3.1
port is : /dev/ttyACM0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
hangup is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
logfile is : none
initstring : none
exit_after is : not set
exit is : no
Type [C-a] [C-h] to see available commands
Terminal ready
PureOS pureos ttyGS0
pureos login: ATPassword:
AT
Login incorrect
ATPasswort: AT
Login incorrect
pureos Login: ATPassword:
Login incorrect
pureos Login:
```
The device ttyGS0, seems to be a device on the phone.https://source.puri.sm/Librem5/OS-issues/-/issues/339crimson: device does not suspend with powerbutton2023-11-06T09:01:43ZMatthias Apitzcrimson: device does not suspend with powerbuttonThe Librem 11 suspends fine after the configured idle time when on battery or power supply. But it does not suspend on using the power button, even when configured that this should be its action. Only the display is switched off.The Librem 11 suspends fine after the configured idle time when on battery or power supply. But it does not suspend on using the power button, even when configured that this should be its action. Only the display is switched off.https://source.puri.sm/Librem5/OS-issues/-/issues/338crimson: USB tethering does not work at all2023-11-06T09:05:03ZMatthias Apitzcrimson: USB tethering does not work at allWhen I connect my Librem 11 via USB-C cable, I expect that on both devices network interfaces will come up, as it does with the Librem 5 (usb0 in L5 and en7 in MacOS).
The only visible reaction is in /var/log/syslog these lines:
```
202...When I connect my Librem 11 via USB-C cable, I expect that on both devices network interfaces will come up, as it does with the Librem 5 (usb0 in L5 and en7 in MacOS).
The only visible reaction is in /var/log/syslog these lines:
```
2023-11-03T09:34:49.131639+00:00 pureos kernel: [ 4049.766672] usb 1-7: USB disconnect, device number 29
2023-11-03T09:34:49.248747+00:00 pureos acpid: input device has been disconnected, fd 16
2023-11-03T09:34:49.291865+00:00 pureos acpid: input device has been disconnected, fd 17
2023-11-03T09:34:49.348458+00:00 pureos acpid: input device has been disconnected, fd 18
2023-11-03T09:34:50.051901+00:00 pureos kernel: [ 4050.683120] usb 1-7: new full-speed USB device number 30 using xhci_hcd
2023-11-03T09:34:50.203616+00:00 pureos kernel: [ 4050.835719] usb 1-7: New USB device found, idVendor=1018, idProduct=1008, bcdDevice= 1.00
2023-11-03T09:34:50.203651+00:00 pureos kernel: [ 4050.835740] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
2023-11-03T09:34:50.207621+00:00 pureos kernel: [ 4050.840763] input: HID 1018:1008 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1018:1008.0025/input/input75
2023-11-03T09:34:50.210309+00:00 pureos mtp-probe: checking bus 1, device 30: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7"
2023-11-03T09:34:50.210646+00:00 pureos mtp-probe: bus: 1, device: 30 was not an MTP device
2023-11-03T09:34:50.267538+00:00 pureos kernel: [ 4050.901032] hid-generic 0003:1018:1008.0025: input,hidraw1: USB HID v1.11 Keyboard [HID 1018:1008] on usb-0000:00:14.0-7/input0
2023-11-03T09:34:50.271531+00:00 pureos kernel: [ 4050.906335] input: HID 1018:1008 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:1018:1008.0026/input/input76
2023-11-03T09:34:50.331538+00:00 pureos kernel: [ 4050.963080] input: HID 1018:1008 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:1018:1008.0026/input/input77
2023-11-03T09:34:50.331560+00:00 pureos kernel: [ 4050.963251] hid-generic 0003:1018:1008.0026: input,hiddev0,hidraw2: USB HID v1.11 Device [HID 1018:1008] on usb-0000:00:14.0-7/input1
2023-11-03T09:34:50.363106+00:00 pureos mtp-probe: checking bus 1, device 30: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7"
2023-11-03T09:34:50.363676+00:00 pureos mtp-probe: bus: 1, device: 30 was not an MTP device
```https://source.puri.sm/Librem5/OS-issues/-/issues/330apt update says "Could not connect to repo.pureos.net:443"2023-08-11T10:03:02ZElias Rudbergapt update says "Could not connect to repo.pureos.net:443"The last few days, the `apt update` command on my Librem 5 says: "`Could not connect to repo.pureos.net:443`"
Is something wrong with the repo.pureos.net server?The last few days, the `apt update` command on my Librem 5 says: "`Could not connect to repo.pureos.net:443`"
Is something wrong with the repo.pureos.net server?https://source.puri.sm/Librem5/OS-issues/-/issues/326Cannot scale-to-fit mumble2023-06-02T16:15:39ZEvangelos Ribeiro TzarasCannot scale-to-fit mumbleThe preferences window in Mumble overflows a lot.
p-m-s does not show a separate entry in the compositor panel.
It was previously suspected that the problem being that it's run through xwayland where scaling does not work,
however I've...The preferences window in Mumble overflows a lot.
p-m-s does not show a separate entry in the compositor panel.
It was previously suspected that the problem being that it's run through xwayland where scaling does not work,
however I've verified that it runs indeed under wayland (`WAYLAND_DEBUG=1` works).
See this video (with ~13MB too big to attach to gitlab directly):
https://fortysixandtwo.eu/upload/mumble1.webm
I will check wayland logs for what type of surface is being opened for the preferences window, but I wanted to share my initial findings already (so I won't forget to do it later).https://source.puri.sm/Librem5/OS-issues/-/issues/319Black screen when trying to add phosh UI to my desktop PureOS version2023-04-30T19:13:36ZOleg LightsBlack screen when trying to add phosh UI to my desktop PureOS versionI'd like to add a mobile interface on my desktop to test the mobile OS and see how close we are to convergence.
I'm using Librem mini v2 running Byzantium updated on March 18th, however I tried it with one of the older versions as well ...I'd like to add a mobile interface on my desktop to test the mobile OS and see how close we are to convergence.
I'm using Librem mini v2 running Byzantium updated on March 18th, however I tried it with one of the older versions as well as on a virtual machine and the result was the same. Specifics: Linux 5.10.0-21-amd64 #1 SMP Debian 5.10.162-1 (2023-01-21) x86_64 GNU/Linux.
When I log out of my desktop, click on my name, I see a settings gear allowing me to pick a UI. I choose phosh and get a black screen. The only way to exit it is to press the sleep button on my keyboard, then wake the machine up which brings back the login screen, from which I can choose another interface that works (GNOME).https://source.puri.sm/Librem5/OS-issues/-/issues/317Kernel upgrade with low space results in phone not booting2023-03-21T10:15:25ZDorota CzaplejewiczKernel upgrade with low space results in phone not booting# What problem did you encounter
When low on space in /boot, a failed initramfs generation results in the boot script pointing to the broken kernel.
## What is the actual behaviour?
1. Install kernel
2. Fail to install
3. Boot script ...# What problem did you encounter
When low on space in /boot, a failed initramfs generation results in the boot script pointing to the broken kernel.
## What is the actual behaviour?
1. Install kernel
2. Fail to install
3. Boot script points to the broken version
## What is the expected behaviour?
3. Boot script points to some good version
## How to reproduce
Starting with:
```
ls /boot/vmlinuz-* | cat
/boot/vmlinuz-5.19.0-1-librem5
/boot/vmlinuz-6.0.0-1-librem5
/boot/vmlinuz-6.1.0-1-librem5
/boot/vmlinuz-6.1.13-librem5-gd7c9aec13bf6
```
Trigger with:
```
sudo truncate -s 32M /boot/fill # adjust size until problem seen. If the kernel installs, increase. If it fails before initramfs generation, decrease.
sudo apt install linux-image-6.2.0-1-librem5
```
Result (notice missing initrd):
```
$ grep -a librem5 /boot/boot.scr
setenv fk_kvers '6.2.0-1-librem5'
purism@pureos:~$ ls /boot/initrd.* | cat
/boot/initrd.img-5.19.0-1-librem5
/boot/initrd.img-6.0.0-1-librem5
/boot/initrd.img-6.1.0-1-librem5
/boot/initrd.img-6.1.13-librem5-gd7c9aec13bf6
purism@pureos:~$ ls /boot/vmlinuz-* | cat
/boot/vmlinuz-5.19.0-1-librem5
/boot/vmlinuz-6.0.0-1-librem5
/boot/vmlinuz-6.1.0-1-librem5
/boot/vmlinuz-6.1.13-librem5-gd7c9aec13bf6
/boot/vmlinuz-6.2.0-1-librem5
```
Log:
```
Unpacking linux-image-6.2.0-1-librem5 (6.2.2pureos1) ...
Setting up linux-image-6.2.0-1-librem5 (6.2.2pureos1) ...
update-initramfs: Generating /boot/initrd.img-6.2.0-1-librem5
pigz: abort: write error on <stdout> (No space left on device)
E: mkinitramfs failure pigz 28
update-initramfs: failed for /boot/initrd.img-6.2.0-1-librem5 with 1.
run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1
Using DTB: freescale/imx8mq-librem5-r4.dtb
Installing /usr/lib/linux-image-6.2.0-1-librem5/freescale/imx8mq-librem5-r4.dtb into /boot/dtbs/6.2.0-1-librem5/freescale/imx8mq-librem5-r4.dtb
Installing new imx8mq-librem5-r4.dtb.
Installing /usr/lib/linux-image-6.2.0-1-librem5/freescale/imx8mq-librem5-r4.dtb into /boot/dtbs/6.2.0-1-librem5/freescale/imx8mq-librem5-r4.dtb
Taking backup of imx8mq-librem5-r4.dtb.
Installing new imx8mq-librem5-r4.dtb.
flash-kernel: deferring update (trigger activated)
dpkg: error processing package linux-image-6.2.0-1-librem5 (--configure):
installed linux-image-6.2.0-1-librem5 package post-installation script subprocess returned error exit status 1
Processing triggers for flash-kernel (3.102.0pureos6) ...
Using DTB: freescale/imx8mq-librem5-r4.dtb
Installing /usr/lib/linux-image-6.2.0-1-librem5/freescale/imx8mq-librem5-r4.dtb into /boot/dtbs/6.2.0-1-librem5/freescale/imx8mq-librem5-r4.dtb
Taking backup of imx8mq-librem5-r4.dtb.
Installing new imx8mq-librem5-r4.dtb.
flash-kernel: installing version 6.2.0-1-librem5
Generating boot script u-boot image... done.
Taking backup of boot.scr.
Installing new boot.scr.
Errors were encountered while processing:
linux-image-6.2.0-1-librem5
E: Sub-process /usr/bin/dpkg returned an error code (1)
```
# What hardware are you running on?
L5
# Relevant OS information
## Which OS are you using?
Byzantiumhttps://source.puri.sm/Librem5/OS-issues/-/issues/310Please update `mmsd-tng` to 1.13.02023-01-13T11:56:45ZChris TalbotPlease update `mmsd-tng` to 1.13.0Hello!
There is a bug in `1.12.1` where T-mobile will tell a user that an MMS is sent, but the MMSC silently dropped the MMS. This bug has been fixed and there is a new release for it. However, since PureOS does not package libsoup3, I ...Hello!
There is a bug in `1.12.1` where T-mobile will tell a user that an MMS is sent, but the MMSC silently dropped the MMS. This bug has been fixed and there is a new release for it. However, since PureOS does not package libsoup3, I tagged and released `1.13.0` specifically for PureOS:
https://gitlab.com/kop316/mmsd/-/tags/1.13.0
Aside from using libsoup3, the `1.x` releases are identical in features to the `2.x` version.https://source.puri.sm/Librem5/OS-issues/-/issues/301Update to Meson 0.592022-12-07T18:35:21ZChris TalbotUpdate to Meson 0.59Hello!
Many apps are updating to GTK-4.0 and Libadwaita. In doing this, many are also updating a lot of their meson scripts, and are making `0.59` the default minimum version. There is a way to maintain backwards compatibility to work i...Hello!
Many apps are updating to GTK-4.0 and Libadwaita. In doing this, many are also updating a lot of their meson scripts, and are making `0.59` the default minimum version. There is a way to maintain backwards compatibility to work in PureOS (I do so in `vvmplayer` and `phosh-antispam`), but one has to convince the upstream maintainers to do so.
It would be nice if PureOS could update to meson 0.59, as this would eliminate the pain point on Backwards compatibility.https://source.puri.sm/Librem5/OS-issues/-/issues/292Plase update `mmsd-tng`, `vvmd`, and `vvmplayer` to the latest packages2022-11-22T11:43:42ZChris TalbotPlase update `mmsd-tng`, `vvmd`, and `vvmplayer` to the latest packages`mmsd-tng`, `vvmd`, and `vvmplayer` look to be on versions that are at least 2 months out of date. The latest versions are in Debian Bookworm, so it should be easy to port over.`mmsd-tng`, `vvmd`, and `vvmplayer` look to be on versions that are at least 2 months out of date. The latest versions are in Debian Bookworm, so it should be easy to port over.https://source.puri.sm/Librem5/OS-issues/-/issues/280Backport latest vvmd2022-08-18T11:57:57ZEvangelos Ribeiro TzarasBackport latest vvmd@kop316 pinged me about updating
We have 0.7 in the archive and 0.10 is about to hit bookworm in a couple days.
[Changelog](https://gitlab.com/kop316/vvmd/-/blob/main/ChangeLog)
it mentiones needing this (as of yet) unmerged [patch fo...@kop316 pinged me about updating
We have 0.7 in the archive and 0.10 is about to hit bookworm in a couple days.
[Changelog](https://gitlab.com/kop316/vvmd/-/blob/main/ChangeLog)
it mentiones needing this (as of yet) unmerged [patch for curl](https://github.com/curl/curl/pull/8986)
maybe we should also keep that on our radar,
but if I remember the upstream discussion that curl patch is only needed for a "full fix"
for (I believe) [this issue](https://gitlab.com/kop316/vvmd/-/issues/8)
and there might be some partial mitigation in place in 0.9 (I'm a bit hazy on the details currently)
Mostly putting this here as a reminder for myselfhttps://source.puri.sm/Librem5/OS-issues/-/issues/278Images installed with librem5-flash-image do not include systemd-timesyncd2022-07-07T13:38:26ZChris TalbotImages installed with librem5-flash-image do not include systemd-timesyncdThe images installed with: https://source.puri.sm/Librem5/librem5-flash-image do not include `systemd-timesyncd`. As a result, the phone does not sync to an NTP server and `Automatic Time & Date` does not appear in g-c-c as an option. It...The images installed with: https://source.puri.sm/Librem5/librem5-flash-image do not include `systemd-timesyncd`. As a result, the phone does not sync to an NTP server and `Automatic Time & Date` does not appear in g-c-c as an option. It alsso makes for a frustrating experience as many things e.g. apt depend on the corrrect date and time, else one gets errors related to expired certs.
Once installed, the time and date sync and `Automatic Time & Date` appears in g-c-c as an option
Please install `systemd-timesyncd` as a default.https://source.puri.sm/Librem5/OS-issues/-/issues/277No Bluetooth Found in GNOME Settings2022-07-04T17:01:58ZJan VlugNo Bluetooth Found in GNOME SettingsOn my fully up-to-date Librem 5 Bluetooth is not found in GNOME Settings:
![2022-07-03-144658](/uploads/3aace50705647a9e7265e95343df3c93/2022-07-03-144658.png)
I had a quick look at this [forum thread](https://forums.puri.sm/t/bluetoot...On my fully up-to-date Librem 5 Bluetooth is not found in GNOME Settings:
![2022-07-03-144658](/uploads/3aace50705647a9e7265e95343df3c93/2022-07-03-144658.png)
I had a quick look at this [forum thread](https://forums.puri.sm/t/bluetooth-support-for-librem-5/14965).
This is the content of my /lib/firmware directory:
```
root@avalon:~# ls -l /lib/firmware
total 16
lrwxrwxrwx 1 root root 31 Sep 11 2021 regulatory.db -> /etc/alternatives/regulatory.db
-rw-r--r-- 1 root root 3764 Jun 30 2020 regulatory.db-debian
-rw-r--r-- 1 root root 3764 Jun 30 2020 regulatory.db-upstream
lrwxrwxrwx 1 root root 35 Sep 11 2021 regulatory.db.p7s -> /etc/alternatives/regulatory.db.p7s
-rw-r--r-- 1 root root 1249 Jun 30 2020 regulatory.db.p7s-debian
-rw-r--r-- 1 root root 1182 Jun 30 2020 regulatory.db.p7s-upstream
```
Here is the output of `dmesg | grep redpine`: [redpine_dmesg.txt](/uploads/8527209cec1ea78f3f817d28b285fa3b/redpine_dmesg.txt). I disabled Wifi/Bluetooth and enabled it again with the kill switch in the time span covered by this file.https://source.puri.sm/Librem5/OS-issues/-/issues/273Package powersupply2022-08-02T11:52:37ZEvangelos Ribeiro TzarasPackage powersupplyhttps://gitlab.com/MartijnBraam/powersupply/
https://gitlab.com/mobian1/packages/powersupply
![powersupply](/uploads/5f1fb8a188f2da486cc349f3471c4400/powersupply.png)
![powersupply_charging](/uploads/feee7fc24ee7efa62a17ae463e9733f0/po...https://gitlab.com/MartijnBraam/powersupply/
https://gitlab.com/mobian1/packages/powersupply
![powersupply](/uploads/5f1fb8a188f2da486cc349f3471c4400/powersupply.png)
![powersupply_charging](/uploads/feee7fc24ee7efa62a17ae463e9733f0/powersupply_charging.png)https://source.puri.sm/Librem5/OS-issues/-/issues/269PureOS Settings app2022-08-08T13:58:38ZGuido GuntherPureOS Settings appWe have a bunch of things that should be tweakable by the user but that isn't in GNOME Settings.
- ring tone and other sound profile settings
- per application feedback settings
`gsettings set org.sigxcpu.feedbackd.application:/org...We have a bunch of things that should be tweakable by the user but that isn't in GNOME Settings.
- ring tone and other sound profile settings
- per application feedback settings
`gsettings set org.sigxcpu.feedbackd.application:/org/sigxcpu/feedbackd/application/sm-puri-phosh/ profile quiet`
- scale-to-fit settings (select app from list of running applications)
`helpers/scale-to-fit org.gnome.Maps on`
- mark apps as adaptive (selectable from a list of installed applications
`$ gsettings set sm.puri.phosh force-adaptive "['chromium.desktop', 'firefox-esr.desktop', 'org.gnome.Dictionary.desktop', 'org.gnome.Maps.desktop', 'org.gnome.zbrown.KingsCross.desktop', 'yelp.desktop', 'org.gnome.TwentyFortyEight.desktop', 'org.gnome.eog.desktop', 'org.gnome.Reversi.desktop', 'org.gnome.LightsOff.desktop', 'com.github.bilelmoussaoui.Authenticator.desktop', 'org.gnome.DiskUtility.desktop']"`
- app filter settings (filter adaptive apps yes/no)
`$ gsettings set sm.puri.phosh app-filter-mode '[]'`
- map external touch screens (selectable from a list of attached touch devices)
`$ gsettings set org.gnome.desktop.peripherals.touchscreen:/org/gnome/desktop/peripherals/touchscreens/27c0:0819/ output "['Unknown', 'NexDock', '8R33926O00Q']"`
- enable disable VoLTE (https://source.puri.sm/angus.ainslie/firmware-bm818-nonfree/-/commit/f48f9877f9a9866dddc224fe25a6be41e0f2bb6b)
- …
Until these things make it upstream (if ever) it would be good to have an app that makes it accessible to the user without resorting to GSettings.
maybe also:
- actions triggered on HKS toggle
- advanced suspend settings
- some relevant settings to report to support (could be merged with the upcoming l5-support app):
- current charging speed
- background tasks that drain the battery
- …
It would be good to have an app (or several) for that.
Related:
- https://gitlab.gnome.org/World/Phosh/phosh/-/issues/779
- https://gitlab.com/postmarketOS/postmarketos-tweaks
This would go a long way to make PureOS easier to use.
@francois.techene @tobias.bernard @sam.hewitt it would be good to have designs for that.https://source.puri.sm/Librem5/OS-issues/-/issues/264Dialect: Cannot close the preferences window2022-07-18T18:42:49ZÉloi RivardDialect: Cannot close the preferences windowThere is no way to close the preferences dialog in dialect with phosh on a L5. I don't know whose responsibility it is.
Related dialect issue: https://github.com/dialect-app/dialect/issues/255
![170329876-ed0b7258-ae83-4a9f-bd79-0f7e76...There is no way to close the preferences dialog in dialect with phosh on a L5. I don't know whose responsibility it is.
Related dialect issue: https://github.com/dialect-app/dialect/issues/255
![170329876-ed0b7258-ae83-4a9f-bd79-0f7e76b41e02](/uploads/0b8105e7a5aac5a90c1248072af55004/170329876-ed0b7258-ae83-4a9f-bd79-0f7e76b41e02.png)