Skip to content

Changes

Page history
Update Librem 5 component list authored by Amos Batto's avatar Amos Batto
Hide whitespace changes
Inline Side-by-side
Hardware/Librem-5-component-list.md
View page @ 7e2a551a
......@@ -52,11 +52,11 @@ Evergreen, [rev 1.0.2](https://source.puri.sm/Librem5/l5-schematic/)
* Smallest diameter 0.254mm
* All on the size of about two credit cards.<br>Only a few contract manufacturers do this.
Librem 5 [Dogwood's circuit boards](https://puri.sm/posts/librem-5-dogwood-update-3/) (side facing the back of the phone):
![Front side of L5 PCBs](https://forums.puri.sm/uploads/default/original/2X/a/a532be8480bf0f1ea5e20a9fb0d5888cb1daab25.jpg)
Librem 5 [Dogwood's circuit boards](https://puri.sm/posts/librem-5-dogwood-update-3/) with [labeled components](https://forums.puri.sm/t/where-components-are-placed-on-the-librem-5-boards/13705/7):
![Librem_5_components_labeled](uploads/6320dfe82d411214334d76cb063a24e5/Librem_5_components_labeled.jpg)
***Note:*** Unfortunately, Purism hasn't released good quality photos of Dogwood or Evergreen, which flipped the i.MX 8M Quad processor on the other side, so it could dissipate heat through the back of the LCD and the phone's metal frame. The Microchip [USB2642](https://ww1.microchip.com/downloads/en/DeviceDoc/00001578D.pdf) USB 2.0 Hub & Flash media card controller should have a [QFN](https://en.wikipedia.org/wiki/Flat_no-leads_package) package, but it appears to have a [QFP](https://en.wikipedia.org/wiki/Quad_flat_package) package in the above photo. The Wolfson Media [WM8962](https://www.cirrus.com/products/wm8962-62b/) audio DAC is probably the small chip to the right of the i.MX 8M Quad processor. The Texas Instruments [BQ25895](https://www.ti.com/lit/ds/symlink/bq25895.pdf) I2C charge controller is probably underneath the metal shield near the 3-pin battery connector and the Winbond [W25Q16JVUXIM](https://www.mouser.com/ProductDetail/Winbond/W25Q16JVUXIM-TR?qs=qSfuJ%252Bfl%2Fd4%2FaGHjiPR2pw%3D%3D) TR SPI NOR Flash is probably located underneath the metal shield which is above the vibration motor.
Librem 5 Dogwood's circuit boards (side facing the back of the LCD):
![Back side of L5 PCBs](https://puri.sm/wp-content/uploads/2020/05/20200512_081030.jpg)
Back side of the Librem 5 [Evergreen's circuit boards](https://forums.puri.sm/t/try-and-error-opening-librem-5-pictures/12517) with shields over the chips:
![Evergreen_PCB](uploads/873b6d3e523c1689990b92c70ed9bc9b/Evergreen_PCB.png)
......