Changes

Jonathan Brielmaier · cf3bfa1e
--- a/Hardware/Librem-5-component-list.md
+++ b/Hardware/Librem-5-component-list.md
 This page provides additional information about the schematics and the list of components in the Librem 5.
 [[_TOC_]]
 ## Schematics and CAD Files
 All of the Librem 5 electronics design files, including schematics, layout, and BOM, are located in the [l5-schematic repo](https://source.puri.sm/Librem5/l5-schematic), licensed under GPLv3+.
 ## Librem 5 releases
 * [DevKit](https://developer.puri.sm/Librem5/Development_Environment/Boards/imx8.html) (released [Dec 18, 2018](https://puri.sm/posts/2018-devkits-are-shipping/)):<br>[hardware reference](https://developer.puri.sm/Librem5/Hardware_Reference/devkit.html), [PCB schematics](https://source.puri.sm/Librem5/dvk-mx8m-bsb/blob/master/dvk-mx8m-bsb.pdf), [KiCAD files](https://source.puri.sm/Librem5/dvk-mx8m-bsb)
 * Birch v0.9.7 (released [Nov 26, 2019](https://puri.sm/posts/librem-5-birch-shipping-announcement/)):<br>[hardware reference](https://developer.puri.sm/Librem5/Hardware_Reference/Birch.html), [main board schematics](https://developer.puri.sm/Librem5/_downloads/librem5_birch_mainboard_schematic.pdf), [USB-C board schematics](https://developer.puri.sm/Librem5/_downloads/librem5_birch_usb-c_board_schematic.pdf), [x-rays](https://developer.puri.sm/Librem5/Hardware_Reference/Birch.html#x-rays)
 * Chestnut v0.9.8 (released [late Dec. 2019](https://forums.puri.sm/t/chestnut-shipping/8174)):<br>[hardware reference](https://developer.puri.sm/Librem5/Hardware_Reference/Chestnut.html), [main board schematics](https://developer.puri.sm/Librem5/_downloads/librem5_chestnut_mainboard_schematic.pdf), [USB-C board schematics](https://developer.puri.sm/Librem5/_downloads/librem5_chestnut_usb-c_board_schematic.pdf)
 * Dogwood v1.0.0 (released [Aug 3, 2020](https://forums.puri.sm/t/dogwood-shipping-out-today/9920)):<br>[main board schematics](https://source.puri.sm/Librem5/l5-schematic/-/blob/0df520878f63b9015b8bb41a2cd3b41153a330e5/librem5_mainboard_schematic.pdf), [USB-C board schematics](https://source.puri.sm/Librem5/l5-schematic/-/blob/0df520878f63b9015b8bb41a2cd3b41153a330e5/librem5_usb-c_board_schematic.pdf), [specs & photos](https://forums.puri.sm/t/comparing-specs-of-upcoming-linux-phones/6827)
 * Evergreen v1.0.2 (released [Nov 18, 2020](https://puri.sm/posts/librem-5-mass-production-phone-has-begun-shipping/)):<br>[main board schematics](https://source.puri.sm/Librem5/l5-schematic/-/raw/ed32066a91a90c268d8d99c847fda38c97760d0d/librem5_mainboard_schematic.pdf?inline=false), [USB-C board schematics](https://source.puri.sm/Librem5/l5-schematic/-/raw/ed32066a91a90c268d8d99c847fda38c97760d0d/librem5_usb-c_board_schematic.pdf?inline=false), [specs & photos](https://forums.puri.sm/t/comparing-specs-of-upcoming-linux-phones/6827), [disassembly instructions](https://puri.sm/posts/disassemble-librem-5/), [i.MX 8M Quad pins](https://source.puri.sm/Librem5/l5-schematic/-/raw/master/soc_pinout.ods)
 * Evergreen v1.0.3:<br>[main board schematics](https://source.puri.sm/Librem5/l5-schematic/-/raw/134ff8373204891419ef0340b90f627733e87798/librem5_mainboard_schematic.pdf?inline=false)
 * Evergreen v1.0.6 (published [Nov 13, 2021](https://source.puri.sm/Librem5/l5-schematic/-/commit/74ac77d566096e3a238f867c25750740eb150ba0)):<br>main board [schematics](https://source.puri.sm/Librem5/l5-schematic/-/raw/master/librem5_mainboard_schematic.pdf?inline=false) & [assembly drawing](https://source.puri.sm/Librem5/l5-schematic/-/raw/ae63426d57f378c1bb77aa13ccd8d1c90514bf1a/librem5_mainboard_assembly_drawing.pdf?inline=false), USB-C board [schematics](https://source.puri.sm/Librem5/l5-schematic/-/raw/master/librem5_usb-c_board_schematic.pdf?inline=false) & [assembly drawing](https://source.puri.sm/Librem5/l5-schematic/-/raw/ae63426d57f378c1bb77aa13ccd8d1c90514bf1a/librem5_usb-c_board_assembly_drawing.pdf?inline=false).
 EDA CAD files for v1.0.6 were published to the [l5-schematic repo](https://source.puri.sm/Librem5/l5-schematic).
 * Versions 1.0.3.1 and 1.0.6.1 have made minor changes to improve GNSS reception. Purism hardware engineer Eric Kuzmenko noted that "antenna feedline component values were not finalized until after the schematic was published" and provided the changes in this forum [post](https://forums.puri.sm/t/librem-5-gps-location-tracking/14153/211) and these [instructions](https://source.puri.sm/Librem5/OS-issues/uploads/ffece0815fd2d8a64574a18796e662fc/GNSS_sensitivity_ECO_for_customers.pdf) to change the components on the main board to improve GNSS reception.
 ## Abbreviations in schematics
 The following [abbreviations](https://www.electronics-notes.com/articles/analogue_circuits/circuits-symbols-diagrams/electronics-circuit-symbols-overview.php) are used as the starting letter(s) to identify the components in the Librem 5 schematics:
 * **ANT**: antenna
 * **C** : [capacitor](https://www.electronics-notes.com/articles/analogue_circuits/circuits-symbols-diagrams/capacitors-polar-nonpolar-variable.php)
 * **CON** : connector
 * **D** : [diode](https://www.electronics-notes.com/articles/analogue_circuits/circuits-symbols-diagrams/diode-semiconductor.php)
 * **F** : fuse
 * **J** : [wire link](https://www.electronics-notes.com/articles/analogue_circuits/circuits-symbols-diagrams/wires-switches-connectors.php)
 * **JV** : wire link with voltage
 * **R** : [r](https://www.electronics-notes.com/articles/analogue_circuits/circuits-symbols-diagrams/resistors-fixed-variable.php)[esistor](https://www.electronics-notes.com/articles/analogue_circuits/circuits-symbols-diagrams/resistors-fixed-variable.php)
 * **L** : [inductor](https://www.electronics-notes.com/articles/analogue_circuits/circuits-symbols-diagrams/inductors-chokes-coils-transformers.php)
 * **Q** : transistor
 * **SW** : switch
 * **TC** : test control *(or is it test connector?)*
 * **TP** : test point
 * **TS** : test screw
 * **TV** : test voltage
 * **TVS** : transient voltage suppressor (type of diode)
 * **U** : integrated circuit
 * **Y** : crystal oscillator (used for clocks)<br>
 &nbsp;
 ## Components in main board 
 Evergreen, [rev 1.0.2](https://source.puri.sm/Librem5/l5-schematic/)
 [Info about the main PCB](https://www.sfscon.it/talks/creating-a-free-smartphone/):
 * 160 different parts 
 * 1200 part placements on the PCB 
 * PCB with 10 layers  
    * Smallest parts 0201  
    * Smallest ball pitch 0.4mm  
    * Smallest diameter 0.254mm  
 * All on the size of about two credit cards.<br>Only a few contract manufacturers do this. 
 [Assembly drawing](https://source.puri.sm/Librem5/l5-schematic/-/blob/master/librem5_mainboard_assembly_drawing.pdf) of the Evergreen v1.0.6 main board:  
 ![Librem_5_v1.0.6_main_board_assembly](uploads/be77b4fb39c5c3d418bba187f7970114/Librem_5_v1.0.6_main_board_assembly.png)
 Back side of the Librem 5 [Evergreen v1.0.2's circuit boards](https://forums.puri.sm/t/try-and-error-opening-librem-5-pictures/12517) with shields over the chips:  
 ![Evergreen_PCB](uploads/873b6d3e523c1689990b92c70ed9bc9b/Evergreen_PCB.png)
 Front side of the Librem 5 [Evergreen v.1.0.2's main board](https://www.youtube.com/watch?v=NWQW9bmwHBo) with shields over the chips:  
 ![Front_side_Evergreen_main_PCB](uploads/028e78093baff44bb18b88987a2ba6aa/Front_side_Evergreen_main_PCB.png)
 Librem 5 [Dogwood's circuit boards](https://puri.sm/posts/librem-5-dogwood-update-3/) with [labeled components](https://forums.puri.sm/t/where-components-are-placed-on-the-librem-5-boards/13705/7):     
 ![Librem_5_components_labeled](uploads/071b26a2238471fdd25daebfaa0f6682/Librem_5_components_labeled.jpg)
 ***Note:*** The i.MX 8M Quad processor was flipped on the other side of the main circuit board in Dogwood, so it could dissipate heat through the back of the LCD and the phone's metal frame. The Microchip [USB2642](https://ww1.microchip.com/downloads/en/DeviceDoc/00001578D.pdf) USB 2.0 Hub & Flash media card controller should have a [QFN](https://en.wikipedia.org/wiki/Flat_no-leads_package) package, but it appears to have a [QFP](https://en.wikipedia.org/wiki/Quad_flat_package) package in the above photo. The Wolfson Media [WM8962](https://www.cirrus.com/products/wm8962-62b/) audio DAC is probably the small chip to the right of the i.MX 8M Quad processor. The Texas Instruments [BQ25895](https://www.ti.com/lit/ds/symlink/bq25895.pdf) I2C charge controller is probably underneath the metal shield near the 3-pin battery connector and the Winbond [W25Q16JVUXIM](https://www.mouser.com/ProductDetail/Winbond/W25Q16JVUXIM-TR?qs=qSfuJ%252Bfl%2Fd4%2FaGHjiPR2pw%3D%3D) TR SPI NOR Flash is probably located underneath the metal shield which is above the vibration motor.
 [Main PCB](https://puri.sm/posts/librem-5-usa/) in Aspen:
 ![Back of Aspen's PCB](https://puri.sm/wp-content/uploads/2019/08/l5-proto-pcb-front-view.png)
 ### P.2 POWER TREE
 All the chips in this page are detailed below, except this one:
 * TI [LM3560](https://www.ti.com/lit/ds/symlink/lm3560.pdf) synchronous boost flash driver for camera<br>
 &nbsp;
 ### P.3 CPU POWER
 * U101:<br>NXP [i.MX 8M Quad](https://www.nxp.com/docs/en/data-sheet/IMX8MDQLQCEC.pdf) ([MIMX8MQ6DVAJZAB](https://www.nxp.com/part/MIMX8MQ6DVAJZAB#/)) 4x 1.5 GHz Cortex-A53, 64-bit, superscalar, 1MB L2 cache, 266 MHz Cortex-M4F, 256KB TCM cache, 800Mhz Vivante [GC7000Lite](http://www.vivantecorp.com/index.php/en/media-article/news/277-20140403-vivante-gc7000-delivers-desktop-graphics-to-mobile.html) GPU with 16 Vega shaders, Hantro G1/G2 video decoders (no hardware encode), [Samsung 28nm](https://www.linleygroup.com/newsletters/newsletter_detail.php?num=5993&year=2019&tag=3), FBGA 621 balls, 0.65mm ball pitch, 17×17×2.03 mm<br>
 &nbsp;
 ### P.4 LPDDR4
 * U201:<br>Micron [MT53E768M32D4DT-053 WT:E](https://www.digikey.com/product-detail/en/micron-technology-inc/MT53E768M32D4DT-046-WT:E/MT53E768M32D4DT-046WT:E-ND/10321302?WT.z_cid=ref_neda_dkc_buynow&utm_source=ecia&utm_medium=aggregator&utm_campaign=buynow) mobile LPDDR4 SDRAM 3GB (32 x 768Mb) 2.133GHz, VFBGA-200, 10×14.5mm<br>**_Note:_** This is Micron's automotive-series RAM. This RAM can support up to LPDDR4-4266, but the i.MX 8M Quad only supports up to LPDDR4-3200.<br>
 &nbsp;
 ### P.5 CPU IO
 * U3:<br>Unidentified 12-pin chip which is labeled as "NC" (not connected) (pins: A1, A2, A3, A4, B1, B2, B3, B4, /0E & GND)<br>**_Note:_** [According to LuluColtrane](https://www.reddit.com/r/Purism/comments/i7bdts/list_of_components_for_the_librem_5_dogwood/g10xczi/): "The component is not placed. It was an optional voltage translator for the I2C bus. The voltage translation role is implemented by the two MOSFETs Q4 and Q5 instead." 
 * Q4, Q5, Q8:<br>ROHM [RYU002N05](https://pdf1.alldatasheet.com/datasheet-pdf/view/429927/ROHM/RYU002N05/+328949VOMhMbTbZABvUY.+/datasheet.pdf) 0.9V Drive Nch MOSFET
 * D16, D20:<br>ROHM [RB751G-40](https://d1d2qsbl8m0m72.cloudfront.net/en/products/databook/datasheet/discrete/diode/schottky_barrier/rb751sm-40t2r-e.pdf) Schottky barrier diode 30V 30mA surface mount SOD-723 package<br>
 &nbsp;
 ### P.6 CPU MISC,RTC
 * D8, D22:<br>ROHM [RB751G-40](https://d1d2qsbl8m0m72.cloudfront.net/en/products/databook/datasheet/discrete/diode/schottky_barrier/rb751sm-40t2r-e.pdf) Schottky barrier diode 30V 30mA surface mount SOD-723 package
 * U39:<br>Micro Crystal Switzerland [RV-4162-C7](https://www.microcrystal.com/fileadmin/Media/Products/RTC/Datasheet/RV-4162-C7.pdf) real time clock module with I2C bus
 * Y401:<br>25MHz crystal oscillator
 * Y402:<br>27MHz crystal oscillator<br>
 &nbsp;
 ### P.7 CPU PHY
 * Y501:<br>Diodes Incorporated [NX5427001Z](https://www.diodes.com/fcpfile/fcpdatasheet?file=/NX/NX5427001Z.pdf) 5032 crystal clock oscillator 27MHz ±25ppm 3.3V 6-Pin SMD T/R<br>
 &nbsp;
 ### P.8 EMMC
 * U601:<br>Kioxia (formerly Toshiba) [THGBMHG8C2LBAIR](https://www.mehrinfo.net/toshiba-emmc/1266-thgbmhg8c2lbair.html) 32 GB NAND Flash, P-VFBGA-153, 11.5×13.0×1.0 mm, [[datasheet for 64GB model](https://www.glynshop.com/erp/owweb/Daten/Datenblaetter/DRAM_FLASH_MEDIEN/10_Nand%20solution/05_Toshiba/01_Datenblaetter/01_Original/eMMC/eMMC_15nm/THGBMHG9C4LBAIR_15nm%2064GB%20e-MMC%20supreme%20ver%205.1_E_rev1.1_150709.pdf)]<br>**_Note 1:_** Schematics say eMMC 5.0, but product description says MMC 5.1.<br>**_Note 2:_** Probably TLC Flash, but there is no public info available on the type of Flash. Kioxia makes both FG NAND and BiCS NAND Flash memory.
 **Note:** There is a floating comment with the following parts (which I assume Purism considered, but didn’t end up using):
 * Micron [MTFC16GAKAECN-2M WT](https://www.arrow.com/en/products/mtfc16gakaecn-2mwt/micron-technology) 16GB NAND Flash, VFBGA 153 pins, 3.3V, 13×11.5 mm
 * Micron [MT53B1024M32D4NQ-062](https://www.digikey.com/product-detail/en/micron-technology-inc/MT53B1024M32D4NQ-062-WT-C-TR/MT53B1024M32D4NQ-062WT-CTR-ND/6136041) 4GB 1600MHz mobile LPDDR4 SDRAM, VFBGA 200 pins, 10×14.5 mm
 * Micron [MT25QL256ABA1EW9-0SIT](https://www.digikey.com/product-detail/en/micron-technology-inc/MT25QL256ABA1EW9-0SIT/MT25QL256ABA1EW9-0SIT-ND/6594728) 32MB NOR Flash memory (32Mb x 8) SPI 133MHz WPDFN-8 package, 8×6 mm<br>
 &nbsp;
 ### P.9 PMIC
 * U1:<br>ROHM [BD71837MWV](https://pdf1.alldatasheet.com/datasheet-pdf/view/1157181/ROHM/BD71837MWV/+01WJ3-4XPxHxc.Hwt.CGVFF+/datasheet.pdf) programmable power management integrated circuit (PMIC), 1.71-5.5 V input, max 4A output, 0.7 - 3.3 V output, UQFN-68 package, 8.0×8.0×1.0 mm<br>**_Note:_** This is probably the [BD71837MWV-E2](https://www.digikey.com/product-detail/en/rohm-semiconductor/BD71837MWV-E2/BD71837MWV-E2CT-ND/9761108), which is no longer in stock, so this part may change.
 * U704:<br>Union Semiconductor [UM805RE](https://pdf1.alldatasheet.com/datasheet-pdf/download/829217/UNIONSEMI/UM805RE.html) 4-Pin uP Voltage Monitors with Manual Reset Input
 * D3, D21:<br>ROHM [RB751G-40](https://d1d2qsbl8m0m72.cloudfront.net/en/products/databook/datasheet/discrete/diode/schottky_barrier/rb751sm-40t2r-e.pdf) Schottky barrier diode 30V 30mA surface mount SOD-723 package<br>(for GPIO/WDOG PWR OFF->ON and Reset Button)
 * L702, L703, L704, L705, L707, L706, L710:<br>Sunlord [WPN252012ER47MT](https://datasheet.lcsc.com/szlcsc/1912111437_Sunlord-WPN252012ER47MT_C317620.pdf) power inductor 470nH ±20% 4.1A 26mΩ SMD, 2.5×2.0×1.2 mm<br>(for DRAM, VPU, GPU and VDD_1V8)
 * L32:<br>Sunlord [WPN252012H1R0MT](http://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMDA3MDcxNTI5MjQ4NTUucGRm&lan=en) wire wound power inductor 1uH ±20% SMD, 2.5×2.0×1.2 mm
 * Y1:<br>Crystal oscillator 32.768 KHz 10pF ±20PPM ([example](https://www.rutronik24.com/product/epson/mc-306+++32%2C768khz+10pf+20ppm+++rohsconf/1104641.html))<br>
 &nbsp;
 ### P.10 BOOT CFG
 * Q7, Q10, Q11, Q14, Q18:<br>ROHM [RYU002N05](https://pdf1.alldatasheet.com/datasheet-pdf/view/429927/ROHM/RYU002N05/+328949VOMhMbTbZABvUY.+/datasheet.pdf) 0.9V Drive Nch MOSFET<br>(for 3SW_KILL, BOOT_MODE0 and one for each color of RGB LED)
 * D27:<br>OSRAM Opto Semiconductors [LRTB R98G](https://www.directindustry.com/prod/osram-opto-semiconductors/product-18179-718221.html) SMD three color LED
 * Q19:<br>BCD Semiconductor [AP2302](https://pdf1.alldatasheet.com/datasheet-pdf/download/176229/BCDSEMI/AP2302.html) 3A DDR-SDRAM termination regulator
 * U47:<br>CQ3610BL-100 unidentified 3-pin component in PWM2<br>**_Note:_** [According to LuluColtrane](https://www.reddit.com/r/Purism/comments/i7bdts/list_of_components_for_the_librem_5_dogwood/g10xczi/): "Probably not an IC but a vibration motor."
 * D1, D4:<br>Jiangsu Changjiang Electronics Technology [B5817WS](https://pdf1.alldatasheet.com/datasheet-pdf/download/138805/JIANGSU/B5817WS.html) Schottky barrier diode, plastic-encapsulate SOD-323
 * SW3, SW5, SW7:<br>Shenshen Elybest Electronics [EL-MSK02](http://www.elybest.com/product/bodongkaiguan/124.html) seven-legged toggle switches
 * TVS12, TVS13, TVS14, TVS15, TVS16:<br>Nexperia [PESD3V3S1UL](https://assets.nexperia.com/documents/data-sheet/PESD3V3S1UL.pdf) unidirectional ESD protection diode(one for each hardware kill switch, and Vol+ and Vol- buttons)
 * D9, D11, D13, D15, D18, D23, D24, D28, D29:<br>ROHM [RB751G-40](https://d1d2qsbl8m0m72.cloudfront.net/en/products/databook/datasheet/discrete/diode/schottky_barrier/rb751sm-40t2r-e.pdf) 30V 30mA Schottky barrier diode, surface mount SOD-723 package<br>(for audio, camera, Wi-Fi and 4G power switches, and PMIC_PWRON_KEY, ONOFF, PWR_KEY, and CHG_QON)
 * J1:<br>OCN / Yaqi / Archie [OK-501F006-13](https://detail.1688.com/offer/596950766212.html) 6-pin connector to the Power and Volume buttons<br>**_Note:_** Shenzhen Yaqi Technology Co. is part of OCN in Taiwan, and it produces the Archie brand.
 * TVS29:<br>Nexperia [PESD5V0S1BL](https://assets.nexperia.com/documents/data-sheet/PESD5V0S1BA_BB_BL.pdf) low capacitance bidirectional ESD protection diodes, SOD882 package.<br>(for power button)<br>
 &nbsp;
 ### P.11 USB TYPE C
 * U147:<br>Winbond [W25Q16JVUXIM TR](https://www.mouser.com/ProductDetail/Winbond/W25Q16JVUXIM-TR?qs=qSfuJ%252Bfl%2Fd4%2FaGHjiPR2pw%3D%3D) SPI NOR Flash, 3V, 16M-bit, 4Kb Uniform Sector, DTR, SOIC-8, 150×150mil (3.8×3.8mm) or 200×200mil (5.1×5.1mm), [[datasheet](https://www.mouser.com/datasheet/2/949/w25q16jv_dtr_reve_02092018_plus-1489664.pdf)]
 * U6, U18:<br>Nexperia [PCMF1USB3S](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/common-mode-filters-with-integrated-protection/PCMF1USB3S.html) common-mode EMI filter for differential channels with integrated ESD protection, 1 channel [[datasheet](https://assets.nexperia.com/documents/data-sheet/PCMFXUSB3S_SER.pdf)]
 * L24, L33, L38, L57, L82:<br>Sunlord [HPZ1005U121-1R1TF](https://datasheet.lcsc.com/szlcsc/1811021714_Sunlord-HPZ1005U121-1R1TF_C185886.pdf) multi-layer chip ferrite bead, for high frequency noise suppression, 120Ω @ 100MHz, max 1.1A, 0402<br>(for VDD_3V3 and 3 microphone lines)
 * U909:<br>Texas Instruments [TLV3201](https://www.ti.com/product/TLV3201) single high speed (40 ns), low power (40 μA), push-pull output comparator [[datasheet](https://www.ti.com/lit/ds/symlink/tlv3201.pdf?ts=1596928848604&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTLV3201)]<br>(to power USB1 bus)
 * U10, U13:<br>Nexperia [PCMF2USB3S](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/common-mode-filters-with-integrated-protection/PCMF2USB3S.html) common-mode EMI filter for differential channels with integrated ESD protection, 2 channels, WLCSP-10_4-2-4, 1.57×1.17×0.57 mm, [[data sheet](https://assets.nexperia.com/documents/data-sheet/PCMFXUSB3S_SER.pdf)]
 * U30:<br>Texas Instruments [HD3SS460](https://www.ti.com/product/HD3SS460) 4x6-channel USB Type-C Alternate Mode mux/demux, WQFN-30, 2.5×4.5×0.5 mm, [[datasheet](https://www.ti.com/lit/ds/symlink/hd3ss460.pdf?ts=1596929534277&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FHD3SS460)]
 * L62, L63:<br>Sunlord [MZAH1005F352-R27TF](http://www.sunlordinc.com/detail.aspx?cid=161667) multi-layer chip audio bead (for audio lines), max 1.00Ω 0.27A [[datasheet](http://www.sunlordinc.com/UploadFiles/2017/10/12170250759C4A40.pdf)]<br>(for CC1 and CC2)
 * U27:<br>Texas Instruments [TPS65982](https://www.ti.com/product/TPS65982) USB Type-C and USB PD controller, power switch, and high-speed multiplexer, BGA-96, 6×6 mm [[datasheet](https://www.ti.com/lit/ds/symlink/tps65982.pdf?ts=1596930758214&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTPS65982)]
 * Q1602:<br>ON Semiconductor [NTR2101PT1G](https://www.onsemi.com/pub/Collateral/NTR2101P-D.PDF) MOSFET – single P-channel, small signal, SOT-23, -8.0V, -3.7A
 * D25:<br>ON Semiconductor [NSR20F30NXT5G](https://www.onsemi.com/pub/Collateral/NSR20F30-D.PDF) 30V 2.0A Schottky Barrier Diode, 0603<br>
 &nbsp;
 ### P.12 CHARGE,BAT,LED
 * U15:<br>Maxim Integrated [MAX17055](https://www.maximintegrated.com/en/products/power/battery-management/MAX17055.html) 7µA 1-cell fuel gauge with ModelGauge m5 EZ [[datasheet](https://datasheets.maximintegrated.com/en/ds/MAX17055.pdf)]
 * L46:<br>Mae Hong Son [AMPI0618ED2R2MT](https://www.alibaba.com/product-detail/AMPI0618ED2R2MT-Original-SMD-Power-Wirewound-Inductor_62316408489.html) SMD power wire-wound inductor / switching transformer / bead
 * U14:<br>Texas Instruments [BQ25895](https://www.ti.com/lit/ds/symlink/bq25895.pdf) I2C charge controller (supports up to 14V & 3.25A), WQFN-24, 4.0×4.0 mm 
 * D5:<br>Jiangsu Changjiang Electronics Technology [B5817WS](https://pdf1.alldatasheet.com/datasheet-pdf/download/138805/JIANGSU/B5817WS.html) Schottky barrier diode, plastic-encapsulate SOD-323
 * L58, L59:<br>Sunlord [PZ3216D600-4R0TF](http://www.sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAxOTA0MDgxMzQ3MzM2MTgucGRm&lan=en) multi-layer chip ferrite bead for noise suppression(for battery connector)
 * L60:<br>Sunlord [MZAH1005F352-R27TF](http://www.sunlordinc.com/detail.aspx?cid=161667) multi-layer chip audio bead (for audio lines), max 1.00Ω 0.27A [[datasheet](http://www.sunlordinc.com/UploadFiles/2017/10/12170250759C4A40.pdf)]<br>(for battery connector)
 * J20:<br>BA32-111203-01 3-pin battery connector<br>
 &nbsp;
 ### P.13 SENSOR,SMART CARD
 * U300:<br>Micropower [AH3663](https://pdf1.alldatasheet.com/datasheet-pdf/view/1134953/AHNJ/AH3663.html) 3-pin omnipolar Hall sensor
 * L22, L23, L56, L64, L72:<br>Sunlord [HPZ1005U121-1R1TF](https://datasheet.lcsc.com/szlcsc/1811021714_Sunlord-HPZ1005U121-1R1TF_C185886.pdf) multi-layer chip ferrite bead
 * R105, R217:<br>Diodes Incorporated [AP2281-3FMG-7](https://www.mouser.com/datasheet/2/115/AP2281-1594705.pdf) 10K single slew rate controlled load switch<br>(called “AP2281-3FMG” in schematic)
 * J9:<br>SA0701127150-105 dual SIM and microSD tray<br>**_Note:_** Comment 14 on P.1 says that J9 is a smart cart slot, but the schematics show it as a SIM + microSD tray.
 * *(no designator)*:<br>SA070112150-105 smart card slot
 * TVS8:<br>Nexperia [PESD3V3S1UL](https://assets.nexperia.com/documents/data-sheet/PESD3V3S1UL.pdf) unidirectional ESD protection diode
 * U330:<br>TI [TXS4555](https://www.ti.com/lit/ds/symlink/txs4555.pdf?ts=1596892054565&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTXS4555) 1.8V/3V SIM card power supply with level translator
 * U329:<br>ST [STM32L432KC](https://www.st.com/resource/en/datasheet/stm32l432kc.pdf) ultra-low power Arm Cortex-M4 32-bit MCU+FPU, 100DMIPS, 256KB Flash, 64KB SRAM, USB FS, analog, audio, UFQFPN-32, 5.0×5.0×0.55 mm
 * Y2 (SMD_CRY32.768):<br>Surface mount 32.768 KHz crystal oscillator ([many possible suppliers](https://www.digipart.com/part/32.768%20KHZ))
 * U26:<br>Vishay Semiconductor [VCNL4040M3OE-H5](https://www.vishay.com/docs/84274/vcnl4040.pdf) proximity and ambient light sensor with infrared emitter, I2C interface, and interrupt function, 4.0×2.0×1.1 mm<br>
 &nbsp;
 ### P.14 GNSS
 * CON1, CON2:<br>AT10-110001-01 antenna for GNSS
 * L68:<br>Sunlord [SDCL0603Q5N6CT02 ](http://www.sunlordinc.com/searchpn.aspx?se=&mid=12&page=288&nName=&key=) 5.6 nH multi-layer chip ceramic inductor for RF circuits. [[datasheet](http://www.sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMDA3MDcxNDQyMDc5MzgucGRm&lan=en)]
 * U20:<br>Infineon [BGA725L6](https://www.infineon.com/cms/en/product/rf-wireless-control/low-noise-amplifier-lna-ics/gps-glonass-compass-lna/bga725l6/) silicon germanium low noise amplifier for GNSS, TSLP-6-2 package, 0.7×1.1 mm, [[datasheet](https://www.infineon.com/dgdl/Infineon-BGA725L6-DS-v02_00-en.pdf?fileId=db3a30433784a0400137ef9a4d341f23)]
 * Z1:<br>RF360 Europe [B39162B4327P810](https://www.mouser.com/datasheet/2/842/B4327-1092461.pdf) signal conditioning 1582.4 MHz SAW RF filter for GNSS, 1.4×1.1×0.4 mm<br>**_Note:_** RF360 Europe is a Qualcomm and TDK joint venture.
 * U32:<br>STMicroelectronics [Teseo-LIV3F](https://www.st.com/resource/en/datasheet/teseo-liv3f.pdf) GNSS (GPS/Galileo/GLONASS/BeiDou/QZSS, but no A-GPS), LCC-18 package, 9.7×10.1 mm, using UART2 bus
 * D19 (for VSYS_3V4_4V3):<br>ROHM [RB751G-40](https://d1d2qsbl8m0m72.cloudfront.net/en/products/databook/datasheet/discrete/diode/schottky_barrier/rb751sm-40t2r-e.pdf) 30V 30mA Schottky barrier diode, surface mount SOD-723 package
 * L11 (for VSYS_3V4_4V3):<br>Sunlord [HPZ1005U121-1R1TF](https://datasheet.lcsc.com/szlcsc/1811021714_Sunlord-HPZ1005U121-1R1TF_C185886.pdf) multilayer chip ferrite bead
 * U19:<br>Texas Instruments [TPS78001DRV](https://www.ti.com/lit/ds/symlink/tps780.pdf) 150mA low dropout regulator, ultra-low power (500nA) with pin-selectable, dual-level output voltage
 * U55:<br>Texas Instruments [SN74LVC1G125](https://www.ti.com/lit/ds/symlink/sn74lvc1g125.pdf) single bus buffer gate with 3-state output
 * F5, F9:<br>Nexperia [IP4252CZ8-4-TTL](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/rc-low-pass-filters-with-integrated-protection/IP4252CZ8-4-TTL.html) Integrated 4-channel passive filter network with ESD protection [[datasheet](https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf)]
 * J10:<br>OCN / Yaqi / Archie [OK-06F024-04](https://www.hkinventory.com/public/PublicEnquiry.asp?search=invent&CompanyID=78867&UserID=78867474&CheckKey=m8ilh4m4&PartNum=OK%2D06F024%2D04&PartID=569062371&Describe=SMD&Brand=&DateCode=2018%2B&Qty=671&ClickFrom=PartNumber) 24-pin connector<br>**_Note:_** Shenzhen Yaqi Technology Co. is part of OCN in Taiwan, and it produces the Archie brand.<br>
 &nbsp;
 ### P.15 WIFI,BT
 * L10, L37 (for 3V3_WIFI):<br>Sunlord [HPZ1005U121-1R1TF](https://datasheet.lcsc.com/szlcsc/1811021714_Sunlord-HPZ1005U121-1R1TF_C185886.pdf) multi-layer chip ferrite bead
 * J5:<br>Shenzhen Chuangdian Electronic Technology [APCI0136-P001A](https://m.1688.com/offer/570717232700.html?spm=a26g8.huo_detail_2018.0.0) Key E M.2 67-pin connector, 1.8V
 * F5 (for SPI Flash), F6 (for UART4), F8 (for I2S SAI3), F9 (for I2C4 and UART1):<br>Nexperia [IP4252CZ8-4-TTL](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/rc-low-pass-filters-with-integrated-protection/IP4252CZ8-4-TTL.html) integrated 4-channel passive filter network with ESD protection [[datasheet](https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf)]
 * CON11, CON12:<br>AT10-110001-01 WiFi antenna connectors
 * OCN / Yaqi / Archie [OK-06F024-04](https://www.hkinventory.com/public/PublicEnquiry.asp?search=invent&CompanyID=78867&UserID=78867474&CheckKey=m8ilh4m4&PartNum=OK%2D06F024%2D04&PartID=569062371&Describe=SMD&Brand=&DateCode=2018%2B&Qty=671&ClickFrom=PartNumber) 24-pin connector<br>(front camera connector)<br>**_Note:_** Shenzhen Yaqi Technology Co. is part of OCN in Taiwan, and it produces the Archie brand.
 * ANT2:<br>ECT (Shenzhen Electric Connector Technology) [ECT818000500](https://datasheet.lcsc.com/szlcsc/1912111437_ECT-ECT818000500_C437254.pdf) SMT-type micro coaxial RF connector<br>(Pin 2 is not connected.)
 * R97:<br>Diodes Incorporated [AP2281-3FMG](https://www.mouser.com/datasheet/2/115/AP2281-1594705.pdf) 2.2K single slew rate controlled load switch
 * U185:<br>NXP [NTB0104GU12](https://www.nxp.com/docs/en/data-sheet/NTB0104.pdf) 4-bit voltage level translator, bidirectional, 1-circuit 4-channel, 100Mbps, XQFN-12, 2.0×1.7×0.5 mm
 * Q6, Q9:<br>ROHM [RYU002N05](https://pdf1.alldatasheet.com/datasheet-pdf/view/429927/ROHM/RYU002N05/+328949VOMhMbTbZABvUY.+/datasheet.pdf) 0.9V Drive Nch MOSFET
 * F10, F11:<br>Nexperia [IP4252CZ8-4-TTL](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/rc-low-pass-filters-with-integrated-protection/IP4252CZ8-4-TTL.html) integrated 4-channel passive filter network with ESD protection [[datasheet](https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf)]
 * U25:<br>Nexperia [PCMF1USB3S](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/common-mode-filters-with-integrated-protection/PCMF1USB3S.html) common-mode EMI filter for differential channels with integrated ESD protection [[datasheet](https://assets.nexperia.com/documents/data-sheet/PCMFXUSB3S_SER.pdf)]
 * U40:<br>Diodes Incorporated [AP2281-3FMG-7](https://www.mouser.com/datasheet/2/115/AP2281-1594705.pdf) 10K single slew rate controlled load switch<br>
 &nbsp;
 ### P.16 4G
 * ANT1:<br>ECT (Shenzhen Electric Connector Technology) [ECT818000500](https://datasheet.lcsc.com/szlcsc/1912111437_ECT-ECT818000500_C437254.pdf) SMT-type micro coaxial RF connector
 * CON7, CON8:<br>AT10-110001-01 cellular antenna connectors
 * U12, U48:<br>Diodes Incorporated [AP2281-1FMG](https://www.diodes.com/assets/Datasheets/AP2281.pdf) 6-pin single slew rate controlled load switch
 * U50, U51:<br>Unidentified 6-pin chip which is labeled as “NC” (not connected) (pins: VOUT, GND, ON, VIN, GND, VIN)<br>**_Note:_** [According to LuluColtrane](https://www.reddit.com/r/Purism/comments/i7bdts/list_of_components_for_the_librem_5_dogwood/g10xczi/): "Components not placed. Most likely a placeholder for trying high-side MOSFET switches like the 2 AP2281 above if the AP2281 would have not been satisfying, for components with a different PCB footprint/pinout than the AP2281."
 * J3:<br>[APCI0103-P001A](https://detail.1688.com/offer/598649529288.html) M.2 B-key H=4.8 NGFF socket
 * U9:<br>Nexperia [PCMF1USB3S](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/common-mode-filters-with-integrated-protection/PCMF1USB3S.html) common-mode EMI filter for differential channels with integrated ESD protection [[datasheet](https://assets.nexperia.com/documents/data-sheet/PCMFXUSB3S_SER.pdf)]
 * TVS21:<br>Nexperia [PESD3V3S1UL](https://assets.nexperia.com/documents/data-sheet/PESD3V3S1UL.pdf) unidirectional ESD protection diode
 * D6:<br>ROHM [RB751G-40](https://d1d2qsbl8m0m72.cloudfront.net/en/products/databook/datasheet/discrete/diode/schottky_barrier/rb751sm-40t2r-e.pdf) 30V 30mA Schottky barrier diode, surface mount SOD-723 package
 * F14:<br>Nexperia [IP4252CZ8-4-TTL](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/rc-low-pass-filters-with-integrated-protection/IP4252CZ8-4-TTL.html) integrated 4-channel passive filter network with ESD protection [[datasheet](https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf)]
 * U5:<br>NXP [NTB0104GU12](https://www.nxp.com/docs/en/data-sheet/NTB0104.pdf) 4-bit voltage level translator, bidirectional, 1-circuit 4-channel, 100Mbps, XQFN-12, 2.0×1.7×0.5 mm
 * Q1:<br>ROHM [RYU002N05](https://pdf1.alldatasheet.com/datasheet-pdf/view/429927/ROHM/RYU002N05/+328949VOMhMbTbZABvUY.+/datasheet.pdf) 0.9V Drive Nch MOSFET<br>
 &nbsp;
 ### P.17 MIPI,DSI,CSI
 * U22:<br>Texas Instruments [SN74LVC1G125](https://www.ti.com/lit/ds/symlink/sn74lvc1g125.pdf) single bus buffer gate with 3-state output
 * F7, F115:<br>Nexperia [IP4252CZ8-4-TTL](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/rc-low-pass-filters-with-integrated-protection/IP4252CZ8-4-TTL.html) integrated 4-channel passive filter network with ESD protection [[datasheet](https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf)]
 * U134, U117:<br>Nexperia [PCMF3USB3S](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/common-mode-filters-with-integrated-protection/PCMF3USB3S.html) common-mode EMI filter for differential channels with integrated ESD protection, 3 channels [[datasheet](https://assets.nexperia.com/documents/data-sheet/PCMFXUSB3S_SER.pdf)]
 * U135, U136:<br>Nexperia [PCMF2USB3S](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/common-mode-filters-with-integrated-protection/PCMF2USB3S.html) common-mode EMI filter for differential channels with integrated ESD protection, 2 channels [[datasheet](https://assets.nexperia.com/documents/data-sheet/PCMFXUSB3S_SER.pdf)]
 * TVS55:<br>Nexperia [PESD3V3S1UL](https://assets.nexperia.com/documents/data-sheet/PESD3V3S1UL.pdf) unidirectional ESD protection diode
 * J22:<br>OCN / Yaqi / Archie [OK-06F034-04](https://item.taobao.com/item.htm?id=583178411581) 34-pin 0.4mm pitch female inline connector<br>(for rear camera connector)<br>**_Note:_** Shenzhen Yaqi Technology Co. is part of OCN in Taiwan, and it produces the Archie brand.
 * U21, U37:<br>Texas Instruments [TLV75801PDBVR](https://www.ti.com/store/ti/en/p/product/?p=TLV75801PDBVR) 500-mA, low-IQ, high-accuracy, adjustable ultra-low-dropout voltage regulator, SOT-23-5, 2.9×1.6 mm, [[datasheet](https://www.ti.com/lit/ds/symlink/tlv758p.pdf)]
 * L18, L27, L45, L47, L48, L49, L54, L55, L65, L80:<br>Sunlord [HPZ1005U121-1R1TF](https://datasheet.lcsc.com/szlcsc/1811021714_Sunlord-HPZ1005U121-1R1TF_C185886.pdf) multilayer chip ferrite bead
 * J4:<br>OCN / Yaqi / Archie [OK-06F024-04](https://www.hkinventory.com/public/PublicEnquiry.asp?search=invent&CompanyID=78867&UserID=78867474&CheckKey=m8ilh4m4&PartNum=OK%2D06F024%2D04&PartID=569062371&Describe=SMD&Brand=&DateCode=2018%2B&Qty=671&ClickFrom=PartNumber) 24-pin connector<br>(front camera connector)<br>**_Note:_** Shenzhen Yaqi Technology Co. is part of OCN in Taiwan, and it produces the Archie brand.
 * U7:<br>MicrOne [ME6211C28M5G](https://pdf1.alldatasheet.com/datasheet-pdf/download/1138839/ETC2/ME6211.html) high speed LDO regulators, high PSRR, low noise
 * U33:<br>STmicroelectronics [LDCL015MR](https://www.st.com/resource/en/datasheet/ldcl015.pdf) 150 mA capless ultra low drop linear regulator IC
 * U38:<br>Diodes Incorporated [AP2281-3FMG-7](https://www.mouser.com/datasheet/2/115/AP2281-1594705.pdf) 10K single slew rate controlled load switch<br>
 &nbsp;
 ### P.18 MICROSD,MOTO
 * U17:<br>Texas Instruments [TPS65132](https://www.ti.com/lit/ds/symlink/tps65132.pdf) single inductor - dual output power supply
 * L21:<br>Sunlord [WPN252012H3R3MT](http://sunlordinc.com/searchpn.aspx?key=&se=WPN252012H3R3MT) wire wound SMD power inductor [[datasheet](http://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMDA3MDcxNTI5MjQ4NTUucGRm&lan=en)]
 * L52:<br>Sunlord [PZ0603D241-R35TF](http://www.sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAxOTA0MDgxMzQ3MzM2MTgucGRm&lan=en) multi-layer chip ferrite bead
 * TVS23, TVS28:<br>Nexperia [PESD12VV1BL](https://assets.nexperia.com/documents/data-sheet/PESD12VV1BL.pdf) very low capacitance bidirectional ESD protection diode
 * TVS1, TVS2, TVS24, TVS25, TVS26:<br>Nexperia [PESD3V3S1UL](https://assets.nexperia.com/documents/data-sheet/PESD3V3S1UL.pdf) unidirectional ESD protection diode
 * L8, L31, L40, L41, L42, L76, L77:<br>Sunlord [HPZ1005U121-1R1TF](https://datasheet.lcsc.com/szlcsc/1811021714_Sunlord-HPZ1005U121-1R1TF_C185886.pdf) multilayer chip ferrite bead
 * L20:<br>Nexperia [PN252012H100MT](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/transient-voltage-suppressors-tvs/tvs-400-w-600-w/PTVS30VS1UR.html) 400 W Transient Voltage Suppressor [[datasheet](https://assets.nexperia.com/documents/data-sheet/PTVSXS1UR_SER.pdf)]
 * D2:<br>Jiangsu Changjiang Electronics Technology [B5817WS](https://pdf1.alldatasheet.com/datasheet-pdf/download/138805/JIANGSU/B5817WS.html) Schottky barrier diode, plastic-encapsulate SOD-323
 * U42:<br>Texas Instruments [LM36922](https://www.ti.com/lit/ds/symlink/lm36922.pdf) highly efficient dual-string white LED driver, DSBGA-12, 1.755×1.355 mm
 * J6:<br>OCN / Yaqi / Archie [OK-06F034-04](https://item.taobao.com/item.htm?id=583178411581) 34-pin 0.4mm pitch female inline connector<br>(for LCD connector)<br>**_Note:_** Shenzhen Yaqi Technology Co. is part of OCN in Taiwan, and it produces the Archie brand.
 * F4:<br>Nexperia [IP4252CZ8-4-TTL](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/rc-low-pass-filters-with-integrated-protection/IP4252CZ8-4-TTL.html) integrated 4-channel passive filter network with ESD protection [[datasheet](https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf)]
 * U45:<br>Nexperia [PCMF2USB3S](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/common-mode-filters-with-integrated-protection/PCMF2USB3S.html) common-mode EMI filter for differential channels with integrated ESD protection, 2 channels [[datasheet](https://assets.nexperia.com/documents/data-sheet/PCMFXUSB3S_SER.pdf)]
 * U29:<br>Nexperia [PCMF3USB3S](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/common-mode-filters-with-integrated-protection/PCMF3USB3S.html) common-mode EMI filter for differential channels with integrated ESD protection, 3 channels [[datasheet](https://assets.nexperia.com/documents/data-sheet/PCMFXUSB3S_SER.pdf)]
 * U41:<br>Diodes Incorporated [AP2281-3FMG-7](https://www.mouser.com/datasheet/2/115/AP2281-1594705.pdf) 10K single slew rate controlled load switch<br>
 &nbsp;
 ### P.19 USB HUB
 * U2:<br>Microchip [USB2642](https://ww1.microchip.com/downloads/en/DeviceDoc/00001578D.pdf) USB 2.0 Hub and Flash Media Card Controller, QFN-48, 7×7×0.9 mm
 * Y3:<br>24 MHz crystal oscillator
 * U43, U44:<br>Diodes Incorporated [AP2281-3FMG-7](https://www.mouser.com/datasheet/2/115/AP2281-1594705.pdf) 10K single slew rate controlled load switch
 * J7:<br>SA2101110135-01 dual SIM + microSD card tray
 * TVS4, TVS10:<br>Nexperia [PESD3V3S1UL](https://assets.nexperia.com/documents/data-sheet/PESD3V3S1UL.pdf) unidirectional ESD protection diode
 * F1, F3, F13:<br>Nexperia [IP4252CZ8-4-TTL](https://www.nexperia.com/products/esd-protection-tvs-filtering-and-signal-conditioning/emi-solutions-with-integrated-protection/rc-low-pass-filters-with-integrated-protection/IP4252CZ8-4-TTL.html) integrated 4-channel passive filter network with ESD protection [[datasheet](https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf)]
 * L79:<br>Sunlord [HPZ1005U121-1R1TF](https://datasheet.lcsc.com/szlcsc/1811021714_Sunlord-HPZ1005U121-1R1TF_C185886.pdf) multilayer chip ferrite bead
 * Q3:<br>ROHM [RYU002N05](https://pdf1.alldatasheet.com/datasheet-pdf/view/429927/ROHM/RYU002N05/+328949VOMhMbTbZABvUY.+/datasheet.pdf) 0.9V Drive Nch MOSFET<br>
 &nbsp;
 ### P.20 AUDIO
 * L4, L5, L6, L53, L66, L67, L92:<br>Sunlord [MZAH1608G471-1R6TF](https://www.mhzfilter.com/nes/EMC_Components/MultilayerChipAudioBead.html) multi-layer chip audio bead [[datasheet](http://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAxOTA5MjQxNTE3MzIzMjIucGRm&lan=)]
 * U24:<br>Wolfson Media [WM8962](https://www.cirrus.com/products/wm8962-62b/) audio DAC, ultra-low power stereo CODEC with audio enhancement DSP, 1W stereo class D speaker drivers and ground referenced headphone drivers, W-CSP-49, 3.594×3.984×0.7 mm, [data sheet](https://statics.cirrus.com/pubs/proDatasheet/WM8962_Rev4.4.pdf)
 * L50, L51, L61:<br>Sunlord [MZAH1005F352-R27TF](http://www.sunlordinc.com/detail.aspx?cid=161667) multi-layer chip audio bead (for audio lines), max 1.00Ω 0.27A [[datasheet](http://www.sunlordinc.com/UploadFiles/2017/10/12170250759C4A40.pdf)]
 * L1, L7, L14, L16, L17:<br>Sunlord [HPZ1005U121-1R1TF](https://datasheet.lcsc.com/szlcsc/1811021714_Sunlord-HPZ1005U121-1R1TF_C185886.pdf) multilayer chip ferrite bead
 * Q2:<br>ROHM [RYU002N05](https://pdf1.alldatasheet.com/datasheet-pdf/view/429927/ROHM/RYU002N05/+328949VOMhMbTbZABvUY.+/datasheet.pdf) 0.9V Drive Nch MOSFET
 * Q12:<br>Nexperia [BSS138PW](https://assets.nexperia.com/documents/data-sheet/BSS138PW.pdf) 60V, 320mA N-channel Trench MOSFET, SOT323 package 
 * J2:<br>JACK-JA-36A1-111 3.5mm audio jack
 * TVS5, TVS9, TVS17, TVS18:<br>Nexperia [PESD3V3S1UL](https://assets.nexperia.com/documents/data-sheet/PESD3V3S1UL.pdf) unidirectional ESD protection diode
 * Y3:<br>24MHz crystal oscillator
 * TVS3, TVS53, TVS58, TVS59:<br>Nexperia [PESD5V0S1BL](https://assets.nexperia.com/documents/data-sheet/PESD5V0S1BA_BB_BL.pdf) low capacitance bidirectional ESD protection diodes, SOD882 package.
 * U46:<br>Diodes Incorporated [AP2281-3FMG-7](https://www.mouser.com/datasheet/2/115/AP2281-1594705.pdf) 10K single slew rate controlled load switch
 * U78:<br>STmicroelectronics [LDCL015MR](https://www.st.com/resource/en/datasheet/ldcl015.pdf) 150 mA capless ultra low drop linear regulator IC, SOT23-5<br>
 &nbsp;
 ## USB-C board components 
 (Evergreen, [rev 1.0.2](https://source.puri.sm/Librem5/l5-schematic/))
 * J10:<br>US-3102-111 28-pin USB Type-C connector
 * U31:<br>Solid State System [3SM222FMT1KA](http://www.3system.com.tw/upload/product/77cc6f14226d203e1a6031b3893bab7f.pdf) MEMS microphone IC with specialized pre-amplification & analog-to-digital converter ASIC to provide high SNR output from a capacitive audio sensor, LGA 8-pin
 * D15, D30:<br>Everlight [ELCH08-2025J3J6283910-N0](https://cn.made-in-china.com/gongying/weslinyu-EeHxQLRvJFpB.html?source=showroom_shouye) white LED light (gallium nitride), square lamp
 * J8:<br>BTB6-1.27 6-pin board-to-board connector with 1.27mm pitch
 * D10:<br>Nexperia [PTVS16VS1UR](https://www.nexperia.com/products/automotive-qualified-products-aec-q100-q101/automotive-esd-protection-and-tvs/automotive-transient-voltage-suppressors-tvs/PTVS16VS1UR.html) 400 W Transient Voltage Suppressor [[datasheet](https://assets.nexperia.com/documents/data-sheet/PTVSXS1UR_SER.pdf)]
 * J11:<br>Unidentified 46-pin connector
 * L68, L60, L70:<br>Sunlord [HPZ1005U121-1R1TF](https://datasheet.lcsc.com/szlcsc/1811021714_Sunlord-HPZ1005U121-1R1TF_C185886.pdf) multi-layer chip ferrite bead
 * L2, L3:<br>Sunlord [MZAH1608G471-1R6TF](https://www.mhzfilter.com/nes/EMC_Components/MultilayerChipAudioBead.html) multi-layer chip audio bead [[datasheet](http://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAxOTA5MjQxNTE3MzIzMjIucGRm&lan=)]
 * ANT1:<br>4-pin 4G antenna end, 1.5×0.6 mm
 * F1 (added in Evergreen):<br>Littelfuse [400CC1206LR-C](https://www.mouser.com/ProductDetail/Littelfuse/400CC1206LR-C?qs=ahcBuItHZ3xZHvq61gjfjQ%3D%3D) PPTC resettable fuse, [datasheet](https://www.mouser.com/datasheet/2/240/Littelfuse_02282019_PTC_LoRho_Datasheet_v1.11.-1536908.pdf) <br>
 ## Components in the WiFi/Bluetooth M.2 board
-Purism hasn't published the schematics for the M.2 2230 B-key card containing the Silicon Labs (formerly Redpine Signals) [RS9116](https://www.silabs.com/wireless/wi-fi/rs9116-wi-fi-transceiver-modules) WiFi/Bluetooth chip. This card is assembled by Silicon Labs [in Hyderabad, India](https://puri.sm/products/librem-5-usa/) and contains the following ICs:
+Since January 2023 all Librem 5's are shipped with the [SparkLAN WNFB-266AXI(BT)](https://puri.sm/posts/shipping-new-sparklan-wifi-cards-with-librem-5/) WiFi/Bluetooth M.2 board.
-* Silicon Labs [RS9116N-DB00-CC0](https://www.silabs.com/wireless/wi-fi/rs9116-wi-fi-transceiver-modules/device.rs9116n-db00-cc0) dual band (2.4 & 5 GHz) WiFi 802.11 b/g/n, 802.11j, dual-mode Bluetooth 5, LGA-173, 9.1×9.8×1.6 mm, [data sheet](https://www.silabs.com/documents/login/data-sheets/rs9116-cc0-connectivity-module-datasheet.pdf)<br>**_Note:_** The schematics (p.15) say "Bluetooth 4.1", but the RS9116 supports Bluetooth 5.0. However, only Bluetooth 4 [has been tested]
+Purism hasn't published the schematics for the M.2 2230 B-key card containing the Silicon Labs (formerly Redpine Signals) [RS9116](https://www.silabs.com/wireless/wi-fi/rs9116-wi-fi-transceiver-modules) WiFi/Bluetooth chip. This card is assembled by Silicon Labs [in Hyderabad, India](https://puri.sm/products/librem-5-usa/) and contains the following ICs:
-* TI [LSF0108](https://www.ti.com/lit/ds/symlink/lsf0108.pdf) Eight channel auto-bidirectional multi-voltage level translator for open-drain and push-pull applications, VQFN-20, 4.50×2.50 mm
+* Silicon Labs [RS9116N-DB00-CC0](https://www.silabs.com/wireless/wi-fi/rs9116-wi-fi-transceiver-modules/device.rs9116n-db00-cc0) dual band (2.4 & 5 GHz) WiFi 802.11 b/g/n, 802.11j, dual-mode Bluetooth 5, LGA-173, 9.1×9.8×1.6 mm, [data sheet](https://www.silabs.com/documents/login/data-sheets/rs9116-cc0-connectivity-module-datasheet.pdf)<br>**_Note:_** The schematics (p.15) say "Bluetooth 4.1", but the RS9116 supports Bluetooth 5.0. However, only Bluetooth 4 [has been tested]
-[Front](https://forums.puri.sm/t/can-someone-post-high-resolution-photos-of-the-l5s-m-2-cards/13582/10) of the RS9116 WiFi/BT M.2 card (50 components):  
+* TI [LSF0108](https://www.ti.com/lit/ds/symlink/lsf0108.pdf) Eight channel auto-bidirectional multi-voltage level translator for open-drain and push-pull applications, VQFN-20, 4.50×2.50 mm
-![Front of RS9116 WiFi M.2 card](uploads/9703a5c8be3985e9b452d323c26c1015/Front_Redpine_WiFi_M.2_card.jpg)
+[Front](https://forums.puri.sm/t/can-someone-post-high-resolution-photos-of-the-l5s-m-2-cards/13582/10) of the RS9116 WiFi/BT M.2 card (50 components):  
-[Back](https://forums.puri.sm/t/can-someone-post-high-resolution-photos-of-the-l5s-m-2-cards/13582/10) of the RS9116 WiFi/BT M.2 card (37 components):   
+![Front of RS9116 WiFi M.2 card](uploads/9703a5c8be3985e9b452d323c26c1015/Front_Redpine_WiFi_M.2_card.jpg)
-![Back of RS9116 WiFi/BT M.2 card](uploads/a8739f35b2220db0ad0b093ab5fac9e2/Back_Redpine_WiFi_M.2_card.jpg)
+[Back](https://forums.puri.sm/t/can-someone-post-high-resolution-photos-of-the-l5s-m-2-cards/13582/10) of the RS9116 WiFi/BT M.2 card (37 components):   
-## Components in the cellular modem M.2 boards
+![Back of RS9116 WiFi/BT M.2 card](uploads/a8739f35b2220db0ad0b093ab5fac9e2/Back_Redpine_WiFi_M.2_card.jpg)
-Purism hasn't published the schematics for any of the [M.2 3042](https://media.ccc.de/v/Camp2019-10238-a_mobile_phone_that_respects_your_freedom) [E-key](https://forums.puri.sm/t/news-regarding-librem5-on-chaos-communication-camp-2019/6813/4) cards (via USB 2.0 and I<sup>2</sup>S).
+## Components in the cellular modem M.2 boards
-The M.2 cards containing the BroadMobi [BM818-E1](http://www.broadmobi.com/en/module_show.php?id=18) / BM818-A1 / BM818-T1 are made by BroadMobi in China ([spec sheet](https://p.globalsources.com/IMAGES/PDT/SPEC/593/K1172549593.pdf), [FCC info](https://fccid.io/2AON8-BM818/User-Manual/BM818-Coperation-manual-V1-4-4107101)). Purism is making [in house](https://puri.sm/posts/manufacturing-the-librem-5-usa-phone-in-the-united-states-of-america/) the M.2 cards with the Thales Cinterion [PLS8-E](https://www.thalesgroup.com/en/markets/digital-identity-and-security/iot/iot-connectivity/products/iot-products/pls8-e-high-speed) / [PLS8-US](https://www.thalesgroup.com/en/markets/digital-identity-and-security/iot/iot-connectivity/products/iot-products/pls8-us-high-speed) modems.
+Purism hasn't published the schematics for any of the [M.2 3042](https://media.ccc.de/v/Camp2019-10238-a_mobile_phone_that_respects_your_freedom) [E-key](https://forums.puri.sm/t/news-regarding-librem5-on-chaos-communication-camp-2019/6813/4) cards (via USB 2.0 and I<sup>2</sup>S).
-[Front](https://forums.puri.sm/t/try-and-error-opening-librem-5-pictures/12517) of the BM818-E1 cellular modem (6 components):   
+The M.2 cards containing the BroadMobi [BM818-E1](http://www.broadmobi.com/en/module_show.php?id=18) / BM818-A1 / BM818-T1 are made by BroadMobi in China ([spec sheet](https://p.globalsources.com/IMAGES/PDT/SPEC/593/K1172549593.pdf), [FCC info](https://fccid.io/2AON8-BM818/User-Manual/BM818-Coperation-manual-V1-4-4107101)). Purism is making [in house](https://puri.sm/posts/manufacturing-the-librem-5-usa-phone-in-the-united-states-of-america/) the M.2 cards with the Thales Cinterion [PLS8-E](https://www.thalesgroup.com/en/markets/digital-identity-and-security/iot/iot-connectivity/products/iot-products/pls8-e-high-speed) / [PLS8-US](https://www.thalesgroup.com/en/markets/digital-identity-and-security/iot/iot-connectivity/products/iot-products/pls8-us-high-speed) modems.
-![Front of the BM818-E1 cellular modem](uploads/86383b338b1266ca34af924578b671e8/Front_BM818-E1_cellular_modem.jpg)
+[Front](https://forums.puri.sm/t/try-and-error-opening-librem-5-pictures/12517) of the BM818-E1 cellular modem (6 components):   
-[Front](https://forums.puri.sm/t/can-someone-post-high-resolution-photos-of-the-l5s-m-2-cards/13582/10) of the BM818-A1 cellular modem (6 components):   
+![Front of the BM818-E1 cellular modem](uploads/86383b338b1266ca34af924578b671e8/Front_BM818-E1_cellular_modem.jpg)
-![Front of the BM818-A1 cellular modem](uploads/03d80666ebc8e58dd3bab1bd60478d0b/Front_BM818_cellular_modem.jpg)
+[Front](https://forums.puri.sm/t/can-someone-post-high-resolution-photos-of-the-l5s-m-2-cards/13582/10) of the BM818-A1 cellular modem (6 components):   
-[Back](https://forums.puri.sm/t/can-someone-post-high-resolution-photos-of-the-l5s-m-2-cards/13582/10) of the BM818 cellular modem:   
+![Front of the BM818-A1 cellular modem](uploads/03d80666ebc8e58dd3bab1bd60478d0b/Front_BM818_cellular_modem.jpg)
-![Back of the BM818 cellular modem](uploads/156663d103f70ae22922eadacf1a1384/Back_BM818_cellular_modem.jpg)
+[Back](https://forums.puri.sm/t/can-someone-post-high-resolution-photos-of-the-l5s-m-2-cards/13582/10) of the BM818 cellular modem:   
-## Other components in the Librem 5
+![Back of the BM818 cellular modem](uploads/156663d103f70ae22922eadacf1a1384/Back_BM818_cellular_modem.jpg)
-The Librem 5 contains the following components, which aren't placed on one the four PCBs (main PCB, USB-C PCB, WiFi/BT M.2 card or cellular modem M.2 card): 
+## Other components in the Librem 5
-* Zhongshan Tianmo Battery Co. [1lCP10/55/47](https://puri.sm/posts/librem-5-dogwood-update-3/) 3600mAh 3.8V 13.68Wh li-ion polymer battery, 62g (for Dogwood)
+The Librem 5 contains the following components, which aren't placed on one the four PCBs (main PCB, USB-C PCB, WiFi/BT M.2 card or cellular modem M.2 card): 
-* Zhongshan Tianmao Battery Co. [1ICP10/57/53](https://forums.puri.sm/t/liberm-5-weight-handling/3439/10) 4500mAh 3.8V 17.1Wh li-ion polymer battery, 75g (for Evergreen)
+* Zhongshan Tianmo Battery Co. [1lCP10/55/47](https://puri.sm/posts/librem-5-dogwood-update-3/) 3600mAh 3.8V 13.68Wh li-ion polymer battery, 62g (for Dogwood)
-* Goodix [GT5688](http://www.5raa.com/content/92.html) Touch IC
+* Zhongshan Tianmao Battery Co. [1ICP10/57/53](https://forums.puri.sm/t/liberm-5-weight-handling/3439/10) 4500mAh 3.8V 17.1Wh li-ion polymer battery, 75g (for Evergreen)
-* Mantix [MLAF057WE51 X](https://www.lcds-center.com/18036250-MLAF057WE51%20X.pdf) 5.7″ IPS [a-Si](https://www.androidauthority.com/amorphous-igzo-and-beyond-399778/) LCD, 720×1440 pixels, 16.7M colors, 282 PPI, 1500:1 contrast ratio, 90% sRGB, MIPI DSI.<br>**_Note:_** No mention of hardened glass, but the Librem 5 comes with a plastic screen protector.
+* Goodix [GT5688](http://www.5raa.com/content/92.html) Touch IC
-* Focaltech [FT8006P](https://source.puri.sm/guido.gunther/linux-imx8/commit/8050342cd93538265918e6858f273e1bc3cf6a1a?expanded=1) LCD controller in the Mantix [MLAF057WE51 X](https://www.lcds-center.com/18036250-MLAF057WE51%20X.pdf) display
+* Mantix [MLAF057WE51 X](https://www.lcds-center.com/18036250-MLAF057WE51%20X.pdf) 5.7″ IPS [a-Si](https://www.androidauthority.com/amorphous-igzo-and-beyond-399778/) LCD, 720×1440 pixels, 16.7M colors, 282 PPI, 1500:1 contrast ratio, 90% sRGB, MIPI DSI.<br>**_Note:_** No mention of hardened glass, but the Librem 5 comes with a plastic screen protector.
-* Samsung [S5K3L6XX](https://redmine.replicant.us/projects/replicant/wiki/Librem5Phone) image sensor for back camera, 13.25 MP , CMOS, 1/3", 4224×3136 pixels, 4K@30fps, FHD@60fps, HD@120fps, [f/1.9, 28mm](https://www.gsmarena.com/samsung_galaxy_j4+-9335.php), auto-focus: 10cm - ∞, 81.5° FOV, LED flash<br>(not yet [supported in kernel](https://source.puri.sm/Librem5/linux-next/-/issues/43))<br><br>**_Note:_** The [Samsung S5K3L6XX is used](http://deviceinfohw.ru/devices/item.php?item=60962) in the [Galaxy J4+](https://www.gsmarena.com/samsung_galaxy_j4+-9335.php), which takes decent photos according this [review](https://www.expertreviews.co.uk/samsung/1408991/samsung-galaxy-j4-plus-review-budget-smartphone), but it has the Snapdragon 425 (4x 1.4GHz Cortex-A53, 28nm) which is comparable in CPU power to the i.MX 8M Quad and the J4+’s highest resolution video is 1080p at 30fps. The Samsung 13MP image sensor in the Librem 5 is capable of capturing 4K video at 30fps, but the i.MX 8M Quad has no hardware video encoder and its documentation indicates that it is only capable of encoding 1080p video at 30fps in software. There is currently no kernel support for the [front](https://source.puri.sm/Librem5/linux-next/-/issues/44) and [back](https://source.puri.sm/Librem5/linux-next/-/issues/43) cameras and there is only a [mockup](https://gitlab.gnome.org/Teams/Design/app-mockups/commit/91830ed0c2929bec14a05792db5ab3629afe6f46) of a [future camara app](https://www.omgubuntu.co.uk/2020/02/gnome-camera-app-mockup) for the Librem 5.
+* Focaltech [FT8006P](https://source.puri.sm/guido.gunther/linux-imx8/commit/8050342cd93538265918e6858f273e1bc3cf6a1a?expanded=1) LCD controller in the Mantix [MLAF057WE51 X](https://www.lcds-center.com/18036250-MLAF057WE51%20X.pdf) display
-* SK hynix [YACG4D0C9SHC](https://www.gophotonics.com/products/cmos-image-sensors/sk-hynix/21-271-yacg4d0c9shc) image sensor for front camera, 8.0 MP, CMOS, 1/4", 3264×2448 pixels, QUXGA@30fps, FHD@60fps (crop), HD@90fps, focusing range: 28.9-65.0cm, 83.3° FOV<br>(not yet [supported in kernel](https://source.puri.sm/Librem5/linux-next/-/issues/44))<br>
+* Samsung [S5K3L6XX](https://redmine.replicant.us/projects/replicant/wiki/Librem5Phone) image sensor for back camera, 13.25 MP , CMOS, 1/3", 4224×3136 pixels, 4K@30fps, FHD@60fps, HD@120fps, [f/1.9, 28mm](https://www.gsmarena.com/samsung_galaxy_j4+-9335.php), auto-focus: 10cm - ∞, 81.5° FOV, LED flash<br>(not yet [supported in kernel](https://source.puri.sm/Librem5/linux-next/-/issues/43))<br><br>**_Note:_** The [Samsung S5K3L6XX is used](http://deviceinfohw.ru/devices/item.php?item=60962) in the [Galaxy J4+](https://www.gsmarena.com/samsung_galaxy_j4+-9335.php), which takes decent photos according this [review](https://www.expertreviews.co.uk/samsung/1408991/samsung-galaxy-j4-plus-review-budget-smartphone), but it has the Snapdragon 425 (4x 1.4GHz Cortex-A53, 28nm) which is comparable in CPU power to the i.MX 8M Quad and the J4+’s highest resolution video is 1080p at 30fps. The Samsung 13MP image sensor in the Librem 5 is capable of capturing 4K video at 30fps, but the i.MX 8M Quad has no hardware video encoder and its documentation indicates that it is only capable of encoding 1080p video at 30fps in software. There is currently no kernel support for the [front](https://source.puri.sm/Librem5/linux-next/-/issues/44) and [back](https://source.puri.sm/Librem5/linux-next/-/issues/43) cameras and there is only a [mockup](https://gitlab.gnome.org/Teams/Design/app-mockups/commit/91830ed0c2929bec14a05792db5ab3629afe6f46) of a [future camara app](https://www.omgubuntu.co.uk/2020/02/gnome-camera-app-mockup) for the Librem 5.
+* SK hynix [YACG4D0C9SHC](https://www.gophotonics.com/products/cmos-image-sensors/sk-hynix/21-271-yacg4d0c9shc) image sensor for front camera, 8.0 MP, CMOS, 1/4", 3264×2448 pixels, QUXGA@30fps, FHD@60fps (crop), HD@90fps, focusing range: 28.9-65.0cm, 83.3° FOV<br>(not yet [supported in kernel](https://source.puri.sm/Librem5/linux-next/-/issues/44))<br>
-## Components whose manufacturer is unknown
-### In main board:
+## Components whose manufacturer is unknown
-* U47:<br>CQ3610BL-100 3-pin component in PWM2
+### In main board:
-* J20:<br>BA32-111203-01 3-pin battery connector
-* CON1, CON2:<br>AT10-110001-01 antenna for GNSS
+* U47:<br>CQ3610BL-100 3-pin component in PWM2
-* J9:<br>SA0701127150-105 SIM and microSD tray 
+* J20:<br>BA32-111203-01 3-pin battery connector
-* *(no designator):*<br>SA070112150-105 smart card slot
+* CON1, CON2:<br>AT10-110001-01 antenna for GNSS
-* J3:<br>[APCI0103-P001A](https://detail.1688.com/offer/598649529288.html) M.2 B-key H=4.8 NGFF socket
+* J9:<br>SA0701127150-105 SIM and microSD tray 
-* J2:<br>JACK-JA-36A1-111 3.5mm audio jack
+* *(no designator):*<br>SA070112150-105 smart card slot
-* CON1, CON2:<br>AT10-110001-01 antenna for GNSS
+* J3:<br>[APCI0103-P001A](https://detail.1688.com/offer/598649529288.html) M.2 B-key H=4.8 NGFF socket
-* CON11, CON12:<br>AT10-110001-01 WiFi antenna connectors
+* J2:<br>JACK-JA-36A1-111 3.5mm audio jack
+* CON1, CON2:<br>AT10-110001-01 antenna for GNSS
-### In USB-C board:
+* CON11, CON12:<br>AT10-110001-01 WiFi antenna connectors
-* J10:<br>US-3102-111 28-pin USB Type-C connector
+### In USB-C board:
-* J8:<br>BTB6-1.27 6-pin board-to-board connector with 1.27mm pitch
-* J11:<br>Unidentified 46-pin connector
+* J10:<br>US-3102-111 28-pin USB Type-C connector
-* ANT1:<br>4-pin 4G antenna end, 1.5×0.6 mm
+* J8:<br>BTB6-1.27 6-pin board-to-board connector with 1.27mm pitch
+* J11:<br>Unidentified 46-pin connector
-## Component Count
+* ANT1:<br>4-pin 4G antenna end, 1.5×0.6 mm
-Here is the component count in the Librem 5's two printed circuit boards:
+## Component Count
-|Type of component|Main PCB|USB PCB|
+Here is the component count in the Librem 5's two printed circuit boards:
-|---|---|---|
-|Antenna connectors (ANTxxx)|3|2|
+|Type of component|Main PCB|USB PCB|
-|Capacitors (Cxxx)|521|11|
+|---|---|---|
-|Connectors (CONxxx)|6|8|
+|Antenna connectors (ANTxxx)|3|2|
-|Diodes (Dxxx)|26|1|
+|Capacitors (Cxxx)|521|11|
-|Fuses (Fxxx)|15|1|
+|Connectors (CONxxx)|6|8|
-|Wire links (Jxxx)|18|2|
+|Diodes (Dxxx)|26|1|
-|Wire links with voltage (JVxxx)|2|0|
+|Fuses (Fxxx)|15|1|
-|Resistors (Rxxx)|333|7|
+|Wire links (Jxxx)|18|2|
-|Inductors (Lxxx)|79|7|
+|Wire links with voltage (JVxxx)|2|0|
-|Transistors (Qxxx)|17|0|
+|Resistors (Rxxx)|333|7|
-|Switches (SWxxx)|5|0|
+|Inductors (Lxxx)|79|7|
-|Test controls (TCxxx)|15|0|
+|Transistors (Qxxx)|17|0|
-|Test points (TPxxx)|60|0|
+|Switches (SWxxx)|5|0|
-|Test screw (TSxxx)|12|4|
+|Test controls (TCxxx)|15|0|
-|Test voltage (TVxxx)|39|0|
+|Test points (TPxxx)|60|0|
-|Transient voltage suppressors (TVSxxx)|33|0|
+|Test screw (TSxxx)|12|4|
-|Integrated circuits (Uxxxx) |65|2|
+|Test voltage (TVxxx)|39|0|
-|Crystal oscillators (Yxxxx)|10|0|
+|Transient voltage suppressors (TVSxxx)|33|0|
-|**Total**|**1259**|**45**|
+|Integrated circuits (Uxxxx) |65|2|
+|Crystal oscillators (Yxxxx)|10|0|
-If the test elements aren't included (since they are printed in the board), then the two Librem 5 boards together have 1174 components. In addition, the RS9116 WiFi/Bluetooth M.2 card contains 87 components and the BM818 modem M.2 card contains 6 components, so the 4 boards in the Librem 5 contain a total of 1267 components. 
+|**Total**|**1259**|**45**|
-In comparison, the typical smartphone has between 400 and 600 components, which shows how much easier it is to design a phone with an integrated mobile SoC. The Librem 5 has 2.5 times as many components as the typical smartphone, because it uses 6 separate chips ([i.MX 8M Quad](https://www.nxp.com/docs/en/data-sheet/IMX8MDQLQCEC.pdf), [RS9116](https://www.silabs.com/wireless/wi-fi/rs9116-wi-fi-transceiver-modules), [BM818](http://www.broadmobi.com/en/module_show.php?id=18)/[PLS8](https://storage.pardot.com/128881/202595/Thales_Cinterion_PLS8_Datasheet.pdf), [Teseo-LIV3F](https://www.st.com/resource/en/datasheet/teseo-liv3f.pdf), [WM8962](https://www.cirrus.com/products/wm8962-62b/) and [bq25895](https://www.ti.com/lit/ds/symlink/bq25895.pdf)) in place of an integrated mobile SoC, plus it has extra circuitry for its hardware kill switches and the smartcard reader (which requires a separate ARM microcontroller).  
+If the test elements aren't included (since they are printed in the board), then the two Librem 5 boards together have 1174 components. In addition, the RS9116 WiFi/Bluetooth M.2 card contains 87 components and the BM818 modem M.2 card contains 6 components, so the 4 boards in the Librem 5 contain a total of 1267 components. 
-It's interesting to compare the Librem 5 with the [PinePhone](https://www.pine64.org/pinephone/), which has 4 chips in place of an integrated mobile SoC. The PinePhone contains 672 [components in its two PCBs](https://wiki.pine64.org/index.php?title=PinePhone_component_list) (not including the test elements).
+In comparison, the typical smartphone has between 400 and 600 components, which shows how much easier it is to design a phone with an integrated mobile SoC. The Librem 5 has 2.5 times as many components as the typical smartphone, because it uses 6 separate chips ([i.MX 8M Quad](https://www.nxp.com/docs/en/data-sheet/IMX8MDQLQCEC.pdf), [RS9116](https://www.silabs.com/wireless/wi-fi/rs9116-wi-fi-transceiver-modules), [BM818](http://www.broadmobi.com/en/module_show.php?id=18)/[PLS8](https://storage.pardot.com/128881/202595/Thales_Cinterion_PLS8_Datasheet.pdf), [Teseo-LIV3F](https://www.st.com/resource/en/datasheet/teseo-liv3f.pdf), [WM8962](https://www.cirrus.com/products/wm8962-62b/) and [bq25895](https://www.ti.com/lit/ds/symlink/bq25895.pdf)) in place of an integrated mobile SoC, plus it has extra circuitry for its hardware kill switches and the smartcard reader (which requires a separate ARM microcontroller).  
-|Type of component|Librem 5 main|Librem 5 USB|PinePhone main|PinePhone USB|
+It's interesting to compare the Librem 5 with the [PinePhone](https://www.pine64.org/pinephone/), which has 4 chips in place of an integrated mobile SoC. The PinePhone contains 672 [components in its two PCBs](https://wiki.pine64.org/index.php?title=PinePhone_component_list) (not including the test elements).
-| --- | --- | --- | --- | --- |
-|Antenna connectors (ANTxxx)|3|2|6|4|
+|Type of component|Librem 5 main|Librem 5 USB|PinePhone main|PinePhone USB|
-|Capacitors (Cxxx)|521|11|296|16|
+| --- | --- | --- | --- | --- |
-|Diodes (D/TVS/EDxxx)|59|1|22|0|
+|Antenna connectors (ANTxxx)|3|2|6|4|
-|Connectors (J/CONxxx)|26|10|14|4|
+|Capacitors (Cxxx)|521|11|296|16|
-|Resistors (R/Fxxx)|348|8|222|0|
+|Diodes (D/TVS/EDxxx)|59|1|22|0|
-|Inductors (L/FBxxx)|79|7|21|0|
+|Connectors (J/CONxxx)|26|10|14|4|
-|Transistors (Qxxx)|17|0|16|19*|
+|Resistors (R/Fxxx)|348|8|222|0|
-|Switches (SWxxx)|5|0|1|0|
+|Inductors (L/FBxxx)|79|7|21|0|
-|Test points (T/TC/TP/TS/TVxxx)|126|4|27|3|
+|Transistors (Qxxx)|17|0|16|19*|
-|Integrated circuits (U/DUxxx)|65|2|24†|2|
+|Switches (SWxxx)|5|0|1|0|
-|Crystal oscillators (Y/Xxxx)|10|0|5|0|
+|Test points (T/TC/TP/TS/TVxxx)|126|4|27|3|
-|**Total without test points**|**1133**|**41**|**627**|**45**
+|Integrated circuits (U/DUxxx)|65|2|24†|2|
-|**Total with test points**|**1259**|**45**|**654**|**48**
+|Crystal oscillators (Y/Xxxx)|10|0|5|0|
+|**Total without test points**|**1133**|**41**|**627**|**45**
-\* 18 parts for the PinePhone USB-C port are labeled as T*xxx* in the schematic with the image of transistors, but it is possible that these are resistors and capacitors, just like in the Librem 5 schematic. 
+|**Total with test points**|**1259**|**45**|**654**|**48**
-† There are 26 U/DUxxx listed in the PinePhone schematic, but the two extra are for an alternative magnetometer (U1200 / U1203) and an alternative gyroscope and accelerometer (U1202 / U1204) which are unpopulated. 
+\* 18 parts for the PinePhone USB-C port are labeled as T*xxx* in the schematic with the image of transistors, but it is possible that these are resistors and capacitors, just like in the Librem 5 schematic. 
-Source: [Amos Batto](https://forums.puri.sm/t/component-counts-in-the-librem-5-and-pinephone/11240)
+† There are 26 U/DUxxx listed in the PinePhone schematic, but the two extra are for an alternative magnetometer (U1200 / U1203) and an alternative gyroscope and accelerometer (U1202 / U1204) which are unpopulated. 
-## Disassamble the L5 and replace the display
+Source: [Amos Batto](https://forums.puri.sm/t/component-counts-in-the-librem-5-and-pinephone/11240)
+## Disassamble the L5 and replace the display
 Purism released official documents and videos about how to [disassemble the L5](https://puri.sm/posts/disassemble-librem-5/) and about how to [replace the display](https://puri.sm/posts/replacing-the-screen-of-your-librem-5/).
\ No newline at end of file