| ... | ... | @@ -123,6 +123,14 @@ If the root partition isn't using all of the eMMC storage, these steps will resi |
|
|
|
|
|
|
|
See this thread: <https://forums.puri.sm/t/new-post-app-showcase-backups/11459>. Alternatively: [Example of a quick backup solution](https://forums.puri.sm/t/received-my-librem-5-evergreen/10877/195) using rsync and a systemd timer
|
|
|
|
|
|
|
|
### Boot from SD card
|
|
|
|
|
|
|
|
A recent-enough version of u-boot is required before booting from the SD card is possible. The minimum supported version of u-boot is `2022.10`. To update you can either reflash a recent image, or install a deb from CI artifacts at <https://source.puri.sm/Librem5/uboot-imx> and invoke `sudo u-boot-install-librem5 /dev/mmcblk0` afterwards. A reboot is necessary to apply the update.
|
|
|
|
|
|
|
|
A compatible image can be written to the SD card and **during boot, hold volume-down**.
|
|
|
|
|
|
|
|
Beware that if you put the same image into eMMC and SD, you’ll end up with partitions with duplicated UUIDs, which may cause unexpected behavior during mounting.
|
|
|
|
|
|
|
|
### Convergence
|
|
|
|
|
|
|
|
Purism Posts:
|
| ... | ... | |