Due to an influx of spam, we have had to impose restrictions on new accounts. Please see this page for instructions on how to get full permissions. Sorry for the inconvenience.
@@ -123,6 +123,14 @@ If the root partition isn't using all of the eMMC storage, these steps will resi
...
@@ -123,6 +123,14 @@ If the root partition isn't using all of the eMMC storage, these steps will resi
See this thread: <https://forums.puri.sm/t/new-post-app-showcase-backups/11459>. Alternatively: [Example of a quick backup solution](https://forums.puri.sm/t/received-my-librem-5-evergreen/10877/195) using rsync and a systemd timer
See this thread: <https://forums.puri.sm/t/new-post-app-showcase-backups/11459>. Alternatively: [Example of a quick backup solution](https://forums.puri.sm/t/received-my-librem-5-evergreen/10877/195) using rsync and a systemd timer
### Boot from SD card
A recent-enough version of u-boot is required before booting from the SD card is possible. The minimum supported version of u-boot is `2022.10`. To update you can either reflash a recent image, or install a deb from CI artifacts at <https://source.puri.sm/Librem5/uboot-imx> and invoke `sudo u-boot-install-librem5 /dev/mmcblk0` afterwards. A reboot is necessary to apply the update.
A compatible image can be written to the SD card and **during boot, hold volume-down**.
Beware that if you put the same image into eMMC and SD, you’ll end up with partitions with duplicated UUIDs, which may cause unexpected behavior during mounting.