Tips-&-Tricks.md

@@ -10,16 +10,16 @@ The intention of this section is to collect and conserve knowledge with respect
 
 * **WiFi Connection Problems:** If the Librem 5 won't connect to your network, verify that the phone's date, time, and time zone (in `Settings` > `Details` > `Date & Time` are set correctly. At present, it's necessary to turn off the automatic date/time settings and set these manually. After successful connection, you can return the settings to automatic. If you're using MAC filtering on your router, don't forget to allow your Librem 5 in the router settings first. Using hidden SSID on your router may cause intermittent disconnection.
 * **PureOS updates fail after first setup:** This is caused by an improper timezone or date/time setting required to configure the WiFi connection initially. Solution: [Re-enable  the "Automatic Date & Time" setting](https://forums.puri.sm/t/myl5-unable-to-download-updates-for-librem-5-not-valid-yet-invalid-for-another-2h/12119) in `Settings` > `Details` > `Date & Time`
-* **Convergence** is not yet supported by the software
+* **Standby mode:** Currently no standby / suspend mode available. Screen just gets dark.
+* **Battery fuel meter** [needs adjustments](https://source.puri.sm/Librem5/linux-next/-/merge_requests/198) and for the time being is not precise. E.g. when fully loaded, the red charging led turns off and battery fuel meter indicates 70%. Recent improvements have synced the battery level indicator in the notifications area to the level in the Power settings panel.
 * **GPS** seems to work internally but user interfaces in PureOS are still missing (except switching GPS on and off in `Settings` > `Privacy` > `Location Services`). See https://forums.puri.sm/t/app-for-gps-settings-on-librem-5/12136
+* **Convergence** is not yet supported by the software
 
 ## General
 
 * **Backup**: See this thread: https://forums.puri.sm/t/new-post-app-showcase-backups/11459. Alternatively: [Example of a quick backup solution](https://forums.puri.sm/t/received-my-librem-5-evergreen/10877/195) using rsync and a systemd timer
-* **Battery fuel meter** [needs adjustments](https://source.puri.sm/Librem5/linux-next/-/merge_requests/198) and for the time being is not precise. E.g. when fully loaded, the red charging led turns off and battery fuel meter indicates 70%. [Recent improvements have synced the battery level indicator in the notifications area to the level in the Power settings panel.]
 * **Dark mode:** Not available out-of-the-box. Can be tweaked by using GNOME Tweaks app and set any theme you want there.
 Alternatively, use [gsettings](http://manpages.ubuntu.com/manpages/trusty/man1/gsettings.1.html): `gsettings set org.gnome.desktop.interface gtk-theme "Adwaita-dark"`
-* **Favorite Apps:** To add an app from your app list to the Favorites section (i.e. pin to the top of the list), long-press on the app, then select `Add to Favorites`. The Favorites section expands to accommodate the new favorite app. To remove an app from Favorites, long-press the app, then select `Remove from Favorites`.
 * **File manager:** Install `nautilus` (not yet adaptive). Download [this ](https://source.puri.sm/Librem5/phoc/-/blob/master/helpers/scale-to-fit) and scale it to fit the screen. From the directory where the script is run `scale-to-fit org.gnome.nautilus on`.  
 File manager [nemo](https://en.wikipedia.org/wiki/Nemo_%28file_manager%29) scales well without additional tweaks, especially in landscape. It can be installed with the command: `sudo apt install nemo`, or search and install within PureOS store.
 * **Firewall:** To enable [ufw](https://en.wikipedia.org/wiki/Uncomplicated_Firewall) (uncomplicated firewall), open terminal and enter `sudo ufw status` and if it's not yet enabled, enter `sudo ufw enable`. The default is usually all you need, but you have the options of adding additional rules. Use `sudo ufw disable` to disable the firewall. To call up a graphical interface inside the terminal, first install gufw and install x11-xserver-utils. Next type the following command: `DISPLAY=:0 xhost +` and hit enter, resulting in: `access control disabled, clients can connect from any host`. Now type: `DISPLAY=:0 GDK_BACKEND=x11 sudo gufw` and the graphical version will appear right in the terminal. Note that after you close the terminal, the app icon in the phone's app list will not be operational unless you repeat the above process, at least unless someone adapts it later.
@@ -28,7 +28,6 @@ File manager [nemo](https://en.wikipedia.org/wiki/Nemo_%28file_manager%29) scale
 * **Root account:** Locked by default. So there is no root password available. More technical details [here](https://source.puri.sm/Librem5/image-builder/-/merge_requests/123). Unlock root account with `sudo passwd`, check out [this discussion](https://forums.puri.sm/t/what-does-locking-the-root-password-do/10895) for more background.
 * **Screen Orientation:** At present this is done manually from the notifications area.
 * **Screenshots:** Install `librem5-goodies` (eg. in the terminal with the command `sudo apt install librem5-goodies`). After the installation it will add several apps to the app tray: `Screen Shot`, `Scale Screen`... along with other included apps.
-* **Standby mode:** Currently no standby / suspend mode available. Screen just gets dark.
 * **Terminal:** Access additional Terminal keyboard controls by clicking on the globe icon (reveals Ctrl, Alt, and arrow keys, plus other symbols, controls, and Function keys - including Esc and Tab; press the `>_` key to see the extras). // Here's a quick and fun introduction to basic Terminal commands: https://ubuntu.com/tutorials/command-line-for-beginners#1-overview
 * **User name:** Default user name is: `purism`. Additional user names can be added from the terminal; at present this is not supported in the `Settings` GUI.
 
@@ -38,9 +37,10 @@ File manager [nemo](https://en.wikipedia.org/wiki/Nemo_%28file_manager%29) scale
 * **System/Software Updates:** Click Updates tab within PureOS Store, or install from Terminal. Tip for those new to Linux: Within Terminal, enter: `sudo apt update` followed by `sudo apt upgrade` (if any updates available). (sudo = superuser do / i.e. admin level action)
 * **Enable Flatpak with Flathub repository**: Flatpak support and PureOS store integration are installed by default. Only need to add the Flathub repository via the terminal as described in their setup description [step 3](https://flatpak.org/setup/Debian/)
 (`flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo`)
+* **Add App to favorites:** To add an app from your app list to the Favorites section (i.e. pin to the top of the list), long-press on the app, then select `Add to Favorites`. The Favorites section expands to accommodate the new favorite app. To remove an app from Favorites, long-press the app, then select `Remove from Favorites`.
 * **Web Apps:** You can create an app icon from a web page in the browser as shown in the [Video Walkthrough](https://puri.sm/posts/librem-5-visual-walkthrough/) at position 2m:20s. Deletion / adaption via [Web Application Manager](https://docs.puri.sm/Librem_5/Web.html#web-applications)
 
-## App life-cycle
+## Application life-cycle
 
 * To **close an application** tip on the "roof" symbol on the bottom of the screen which shows a carousel of open apps.
   From there you can close an app by tipping and swiping it up to the upper part/top of the mobile phone