Commit d70b671a authored by David Boddie's avatar David Boddie

Add Bluetooth configuration information

parent 5e12d06a
......@@ -335,13 +335,18 @@ You can also just boot to u-boot without flashing anything:
export PATH=$PATH:/path-to-your-workspace/mfgtools-build/uuu/
uuu uuu_scripts/u-boot_librem5-devkit.lst
Configure WiFi
--------------
Configure Wi-Fi
---------------
Before attempting to use Wi-Fi, ensure that the Wi-Fi/Bluetooth switch is set
to the ON position on the board.
For either method below you must first make sure the module is loaded::
For either method below you must first make sure the relevant module is loaded::
modprobe rsi_sdio
Then you can configure the network interface.
Configure with nmtui
~~~~~~~~~~~~~~~~~~~~
......@@ -359,3 +364,24 @@ directly::
nmcli device wifi rescan
nmcli device wifi list
nmcli device wifi connect SSID-Name password wireless-password
Configure Bluetooth
-------------------
Before attempting to use Bluetooth, ensure that the Wi-Fi/Bluetooth switch is
set to the ON position on the board.
To enable Bluetooth you must first make sure the relevant module is loaded::
modprobe rsi_sdio
It should then be possible to query the Bluetooth device::
hcitool dev
This should produce output like this::
Devices:
hci0 88:DA:1A:9E:BA:95
The exact device address will be different for your board.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment