diff --git a/Development_Environment/Phone/Troubleshooting/Reflashing_the_Phone.rst b/Development_Environment/Phone/Troubleshooting/Reflashing_the_Phone.rst
index 2d490ac115f96d6844e54d4e1369d3f6af27f35f..5ca8f171f14d441527ba5fa791439bddb436876e 100644
--- a/Development_Environment/Phone/Troubleshooting/Reflashing_the_Phone.rst
+++ b/Development_Environment/Phone/Troubleshooting/Reflashing_the_Phone.rst
@@ -1,7 +1,7 @@
 Reflashing the Phone
 ====================
 
-This guide describes how to reflash the system image on your Librem 5 phone from a workstation, using a USB-C cable.
+This guide describes how to reflash the system image on your Librem 5 phone from a workstation, using a USB-A to USB-C cable.
 
 .. contents::
    :local:
@@ -82,6 +82,8 @@ Prepare the Phone
 
 The phone needs to be put in the correct boot mode. The phone itself will not provide an indication of the boot mode -- the workstation is used to check this.
 
+Ensure that the phone is switched off.
+
 Not doing these steps in this order could cause the flashing to fail:
 
  #. Disconnect the USB C cable.