Commit 190bdbf4 authored by David Boddie's avatar David Boddie

Tidy up the table within Sphinx and RTD theme limitations

parent 129cf9f8
.. |br| raw:: html
<br />
.. _hardware_reference:
Hardware Reference
......@@ -140,39 +144,23 @@ LEDs
The three power LED indicators are located next to the battery holder on the board.
+------------+--------------------+-----------------------------+
| Silkscreen | Location | Function |
+============+====================+=============================+
| D304 | Closest to the edge| Charge controller output |
| | | |
| | of the board with | voltage (VBAT_REG) is |
| | | |
| | the power button | properly outputting its |
| | | |
| | | supply voltage. |
+------------+--------------------+-----------------------------+
| D301 | Between LED D304 | Indicates that there is a |
| | | |
| | and D302 | good supply voltage from USB|
| | | |
| | | VBUS. |
+------------+--------------------+-----------------------------+
| D302 | Closest to the edge| If solid-on, the battery is |
| | | |
| | of the board with | being charged. If solid-off,|
| | | |
| | the reset button | then no battery is being |
| | | |
| | | charged. If blinking at ~9Hz|
| | | |
| | | or more, then no battery is |
| | | |
| | | inserted. If blinking at |
| | | |
| | | 1Hz, then there is some |
| | | |
| | | fault condition |
+------------+--------------------+-----------------------------+
+------------+--------------------------+------------------------------------------------------+
| Silkscreen | Location | Function |
+============+==========================+======================================================+
| D304 |br| | Closest to the edge |br| | Charge controller output voltage (VBAT_REG) |br| |
| |br| | of the board with |br| | is properly outputting its supply voltage. |br| |
| |br| | the power button | |br| |
+------------+--------------------------+------------------------------------------------------+
| D301 |br| | Between LED D304 |br| | Indicates that there is a good supply voltage |br| |
| |br| | and D302 | from USB VBUS. |
+------------+--------------------------+------------------------------------------------------+
| D302 |br| | Closest to the edge |br| | If solid-on, the battery is being charged. |br| |
| |br| | of the board with |br| | If solid-off, then no battery is being charged. |br| |
| |br| | the reset button |br| | If blinking at ~9Hz or more, then no battery is |br| |
| |br| | |br| | inserted. |br| |
| |br| | |br| | If blinking at 1Hz then there is some fault |br| |
| |br| | |br| | condition. |
+------------+--------------------------+------------------------------------------------------+
* User controllable LED
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment