Commit 47b8728a authored by Dorota Czaplejewicz's avatar Dorota Czaplejewicz

devkit: Fix heading levels

parent 95a4666d
......@@ -135,7 +135,7 @@ You may need to create the ``plugdev`` group with ``groupadd`` if you're not usi
.. _imx8_devkit_flash_test_image:
Flash the Image
Put the "Boot Mode" switch in the USB position. Attach the development board to a USB C or USB 3 port on the host that is capable of providing 900mA of current. The HID device should appear when using the ``lsusb`` command. Now you can proceed with the flashing.
......@@ -153,7 +153,7 @@ If your PC cannot provide the necessary power you may need a USB 3 powered hub
between the host and the development board.
Flip the boot switch back to eMMC position and press the reboot button. The dev kit serial console should appear at ``/dev/ttyACM0``.
......@@ -164,7 +164,7 @@ In the default configuration, as shipped, USB in is peripheral mode and a
"wall wart" AC adaptor is used for power.
Alternate Configuration - USB C Host
In this configuration, USB host mode is used to allow keyboard, mouse and flash
memory sticks to be connected to the development board.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment