Commit 7a811d01 authored by Dorota Czaplejewicz's avatar Dorota Czaplejewicz

devkit: Update first run instructions to match customers' image

parent 47b8728a
......@@ -57,7 +57,27 @@ Test run
Plug the dev kit to a network using the Ethernet socket. Connect the board to the provided power supply using the provided cable. Two green LEDs will immediately light up between the SoM and the battery holder.
After a moment, the orange Ethernet light should start blinking. Soon, the vibration motor will give a short burst, as the MMC image is loading. If the Ethernet cable is attached and a DNS server is running, the board will automatically obtain an address. It will returns pings, and after a couple minutes, a SSH connection will be possible. Use `root` as the user and the password.
After a moment, the orange Ethernet light should start blinking. Soon, the vibration motor will give a short burst, as the MMC image is loading. Soon, it will register as a USB serial device:
..
Bus 003 Device 025: ID 0525:a4a7 Netchip Technology, Inc. Linux-USB Serial Gadget (CDC ACM mode)
it will appear in the ``/dev/`` directory as a serial port.
..
$ picocom -q -b 115200 /dev/ttyACM0
Debian GNU/Linux buster/sid pureos-test ttyGS0
pureos-test login:
It will be possible to log in using ``root`` as the user name and the password.
If this procedure didn't work for you, please `get in touch`_.
.. _`get in touch`: https://developer.puri.sm/Librem5/Contact.html
Note: the HDMI display will not be used by the dev kit even if plugged.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment