Commit 9208791f authored by David Boddie's avatar David Boddie

Add links to devkit diagram, break hardware ref into sections

parent 146f249b
......@@ -55,15 +55,27 @@ time of writing (2018-12-09), so an external display is highly recommended.
.. figure:: images/dev-board-sockets-buttons-switches.png
:scale: 50%
:alt: Port side, in order: 3.5mm audio socket, RJ45 Ethernet
socket, mini HDMI socket, USB C socket, micro SD card socket.
Kill switch side, in order: reset button, boot mode switch, camera
+ microphone kill switch, cellular kill switch, Wi-Fi kill switch.
Button side, in order: smart card socket, volume down button, volume
up button, power button, micro SIM card socket.
:alt: Ports, right hand side, top to bottom: 3.5mm audio socket, RJ45
Ethernet socket, mini HDMI socket, USB C socket, micro SD card
socket.
Kill switch side, left to right: reset button, boot mode switch,
camera + microphone kill switch, cellular kill switch, Wi-Fi kill
switch.
Button side, right to left: smart card socket, volume down button,
volume up button, power button, micro SIM card socket.
The positions and types of sockets, push buttons and switches (click
to enlarge)
to enlarge).
Ports, right hand side, top to bottom: 3.5mm audio socket (see
:ref:`hardware_ref_audio`), RJ45 Ethernet socket, mini HDMI socket (see
:ref:`hardware_ref_display`), USB C socket (see :ref:`hardware_ref_usb`),
micro SD card socket (see :ref:`hardware_ref_micro_sd`).
Kill switch side, right to left: reset button, boot mode switch,
camera + microphone kill switch, cellular kill switch, Wi-Fi kill
switch.
Button side, right to left: smart card socket (see :ref:`hardware_ref_smart_card`),
volume down button, volume up button, power button (see :ref:`hardware_ref_push_buttons`),
micro SIM card socket (see :ref:`hardware_ref_micro_sim`).
See :ref:`hardware_reference` for information about the specific parts used
for the sockets, buttons and switches.
......
......@@ -20,43 +20,117 @@ Librem 5 Devkit
* 32 GB eMMC
* 3GB RAM
* SPI NOR Flash
* Real Time Clock (RTC)
.. _`hardware_ref_micro_sd`:
Micro SD Card
~~~~~~~~~~~~~
* ALPS SCHA4B0419 MicroSD card slot [`datasheet <SCHA4B0419_>`_]
.. _`hardware_ref_micro_sim`:
Micro SIM Card
~~~~~~~~~~~~~~
* `JAE SF56 <http://www.jae.com/jccom/en/connectors/detail/SF56>`_ micro SIM card slot [`datasheet <SF56S006V4BR2000_>`_]
.. _`hardware_ref_smart_card`:
Smart Card
~~~~~~~~~~
* `Microchip SEC1110 <https://www.microchip.com/wwwproducts/en/SEC1110>`_ smart card reader [`datasheet <SEC1110_>`_]
* Amphenol 1010027182 smart card slot [`datasheet <1010027182_>`_]
Battery
~~~~~~~
* `Texas Instruments BQ25896 <http://www.ti.com/product/BQ25896>`_ battery charge controller [`datasheet <BQ25896_>`_]
* `COMF BHC-18650-1P <http://www.comf.com.tw/ProductDetail.asp?no=99>`_ 18650 battery holder [`datasheet <BHC-18650-1P_>`_]
.. _`hardware_ref_display`:
Display
~~~~~~~
* HDMI output via Mini-HDMI
* Rocktech JH057N00900 MIPI DSI LCD panel: 720x1440 pixels and touch
controller
Camera
~~~~~~
* MIPI CSI Camera
* Hardware kill switches for
.. _`hardware_ref_push_buttons`:
Push Buttons
~~~~~~~~~~~~
* Power
* Reset
* Volume up
* Volume down
.. _`hardware_ref_kill_switches`:
Hardware Kill Switches
~~~~~~~~~~~~~~~~~~~~~~
* WWAN (Modem)
* Wifi/Bluetooth
* Microphone and Camera
.. _`hardware_ref_audio`:
Audio
~~~~~
* `NXP SGTL5000 <https://www.nxp.com/products/media-and-audio/audio-converters/audio-codec/ultra-low-power-audio-codec:SGTL5000>`_ audio codec [`datasheet <SGTL5000_>`_]
* `CUI CMC-2242PBL-A <https://www.cui.com/product/audio/microphones/electret-condenser-microphones/cmc-2242pbl-a>`_ electret condenser microphone [`datasheet <CMC-2242PBL-A_>`_]
* `PUI Audio AS01508MS-SP11-WP-R <http://www.puiaudio.com/product-detail.aspx?categoryId=6&partnumber=AS01508MS-SP11-WP-R>`_ speaker [`datasheet <AS01508MS-SP11-WP-R_>`_]
* Headphones and external microphone via CTIA-configured 3.5mm jack
Bluetooth, Wi-Fi, WWAN
~~~~~~~~~~~~~~~~~~~~~~
* Bluetooth I2S interface
* Bluetooth (UART4)
* RedPine WiFi/BT M.2 module on SDIO
* SIMCom SIM7100E or SIM7100A WWAN module
GNSS
~~~~
* ublox MAX-M8Q GNSS (UART interface and antenna)
Sensors and Motors
~~~~~~~~~~~~~~~~~~
* Haptic motor
* ST LSM9D1 accelerometer, gyro, magnetometer
* JTAG header (unpopulated)
* Proximity / ambient light sensor
* Push buttons (power button, reset button, volume up, volume down)
* RedPine WiFi/BT M.2 module on SDIO
* SIMCom SIM7100E or SIM7100A WWAN module
* Real Time Clock (RTC)
.. _`hardware_ref_usb`:
USB
~~~
* Serial Downloader support (loading u-boot via USB)
* SPI NOR Flash
* USB-C port including USB-C role switching
* USB Hub and SD controller
Headers
~~~~~~~
* JTAG header (unpopulated)
* UART Debug
* LEDs
LEDs
~~~~
* Power indicator
* User controllable LED
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment