Correct a typo that was made on the SoM outline footprint's MH1 drill size...

Correct a typo that was made on the SoM outline footprint's MH1 drill size (3.37mm instead of 3.73mm)

EmCraft's baseboard is actually using imperial units so it's actually a 3.7084mm hole

dvk-mx8m-bsb.pretty/EmCr_SOM_IMX8M_Outline.kicad_mod

-(module EmCr_SOM_IMX8M_Outline (layer F.Cu) (tedit 5B688438)
+(module EmCr_SOM_IMX8M_Outline (layer F.Cu) (tedit 5B6CF205)
   (fp_text reference MOD101 (at 0 -27.5) (layer F.Fab)
     (effects (font (size 1 1) (thickness 0.15)))
   )
@@ -1223,7 +1223,7 @@
   (fp_line (start 33.2 -0.5) (end 37.8 -0.5) (layer F.CrtYd) (width 0.05))
   (fp_line (start 37.8 -0.5) (end 37.8 18.9) (layer F.CrtYd) (width 0.05))
   (fp_line (start 33.2 18.9) (end 33.2 -0.5) (layer F.CrtYd) (width 0.05))
-  (pad MH1 thru_hole circle (at -36.8 -26.8 90) (size 6 6) (drill 3.37) (layers *.Cu *.Mask)
+  (pad MH1 thru_hole circle (at -36.8 -26.8 90) (size 6 6) (drill 3.73) (layers *.Cu *.Mask)
     (zone_connect 2))
   (pad MH2 thru_hole circle (at -36.8 26.8 90) (size 6 6) (drill 3.73) (layers *.Cu *.Mask)
     (zone_connect 2))