1. 14 Aug, 2018 4 commits
    • Eric Kuzmenko's avatar
      Add a 5.29x27.14mm Purism logo to the "back" silkscreen of the board, seen on... · 0154972b
      Eric Kuzmenko authored
      Add a 5.29x27.14mm Purism logo to the "back" silkscreen of the board, seen on the bottom left edge when facing the display, remove the old schematic rescue files which are remnants from the Kicad 5.0.0 upgrade
      0154972b
    • Eric Kuzmenko's avatar
      Re-route the USB hub+SD chip's crystal circuit making it more symmetric,... · 8ce19a5c
      Eric Kuzmenko authored
      Re-route the USB hub+SD chip's crystal circuit making it more symmetric, extend the length of the ETH PHY's XTLI trace going to the crystal in order to more closely match its length to the XTLO trace
      8ce19a5c
    • Eric Kuzmenko's avatar
      Place and route the remaining 5V_P bypass caps which are spread throughout... · 9b4dd2e0
      Eric Kuzmenko authored
      Place and route the remaining 5V_P bypass caps which are spread throughout various spots on the board, get the unrouted count down to 0
      
      Now that the unrouted count is 0, it is time to clean up the entire layout; improving various routing such as separating the SIM card slot's CLK & data and making the USB hub+SD chip's crystal routing symnetric. After that, the BoM needs to be updated with the passive components' tolerances, capacitors' temperature &  voltage ratings, and list recommended PNs which are shared with EmCraft's baseboard.
      9b4dd2e0
    • Eric Kuzmenko's avatar
      Move the two tantalum capacitors which were on the "back" to the "front" side,... · c4d560e2
      Eric Kuzmenko authored
      Move the two tantalum capacitors which were on the "back" to the "front" side, make corrections to the battery holder footprint including a hole which was missing for plastic pillar dealy (3D model contradicts the recommended footprint, may need to be adjusted depending on prototypes), place the 3V3_P and 1V8_P bypass caps throughout the board (as well as two of the 5V_P caps)
      
      Only 8 more 5V_P bypass caps need to be placed and the unrouted count will be 0!
      c4d560e2
  2. 13 Aug, 2018 4 commits
  3. 12 Aug, 2018 4 commits
  4. 11 Aug, 2018 4 commits
  5. 10 Aug, 2018 7 commits
  6. 09 Aug, 2018 4 commits
  7. 08 Aug, 2018 10 commits
  8. 07 Aug, 2018 3 commits