Commit 1da7d224 authored by Eric Kuzmenko's avatar Eric Kuzmenko

Begin routing the 3V3 buck converter circuit, make all SMD footprints defined...

Begin routing the 3V3 buck converter circuit, make all SMD footprints defined as SMD footprints instead of THT
parent 8c614dc1
This diff is collapsed.
(module BQ25896 (layer F.Cu) (tedit 5B464B1C)
(module BQ25896 (layer F.Cu) (tedit 5B688383)
(solder_mask_margin 0.07)
(solder_paste_margin -0.025)
(attr smd)
(fp_text reference REF** (at 0 -3.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
......
(module Conn_Hirose_FPC_39x0_3 (layer F.Cu) (tedit 5B4E7097)
(module Conn_Hirose_FPC_39x0_3 (layer F.Cu) (tedit 5B6883E2)
(attr smd)
(fp_text reference REF** (at 0 -2.6) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
......
(module Conn_Pan_AXT530124 (layer F.Cu) (tedit 5B4FDB6C)
(module Conn_Pan_AXT530124 (layer F.Cu) (tedit 5B68830A)
(attr smd)
(fp_text reference REF** (at 0.3 -2.7) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
......
(module EmCr_SOM_IMX8M_Outline (layer F.Cu) (tedit 5B3EB6AB)
(attr smd)
(module EmCr_SOM_IMX8M_Outline (layer F.Cu) (tedit 5B688438)
(fp_text reference MOD101 (at 0 -27.5) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
......@@ -1233,7 +1232,7 @@
(pad MH4 thru_hole circle (at 36.8 25 90) (size 6 6) (drill 3.73) (layers *.Cu *.Mask)
(zone_connect 2))
(model ${KIPRJMOD}/packages3d/SoM.wrl
(at (xyz -1.574473 -1.181417 0.21348))
(offset (xyz -39.99161359938621 -30.00799134932518 5.422391918563843))
(scale (xyz 0.39375 0.39375 0.39375))
(rotate (xyz 0 0 0))
)
......
(module RV-4162-C7 (layer F.Cu) (tedit 5B287332)
(module RV-4162-C7 (layer F.Cu) (tedit 5B6883CB)
(attr smd)
(fp_text reference REF** (at 0 -2) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
......@@ -23,7 +24,7 @@
(pad 2 smd trapezoid (at -0.45 0.6) (size 0.5 0.8) (layers F.Cu F.Paste F.Mask))
(pad 1 smd trapezoid (at -1.35 0.6) (size 0.5 0.8) (layers F.Cu F.Paste F.Mask))
(model ${KIPRJMOD}/packages3d/XSON8.wrl
(at (xyz -0.07000000000000001 -0.0375 0.002))
(offset (xyz -1.777999973297119 -0.9524999856948853 0.05079999923706055))
(scale (xyz 0.7 0.7 0.7))
(rotate (xyz -90 0 0))
)
......
(module SEC1110 (layer F.Cu) (tedit 5B465554)
(module SEC1110 (layer F.Cu) (tedit 5B68839B)
(solder_mask_margin 0.05)
(solder_paste_margin -0.025)
(attr smd)
(fp_text reference REF** (at 0 -4) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
......
(module VCNL4040 (layer F.Cu) (tedit 5B662270)
(module VCNL4040 (layer F.Cu) (tedit 5B6885F8)
(attr smd)
(fp_text reference REF** (at 0 -2.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment