Commit 2456bfb3 authored by Eric Kuzmenko's avatar Eric Kuzmenko

Make the ENET_* traces on the top layer 53mils in order to ensure they have a...

Make the ENET_* traces on the top layer 53mils in order to ensure they have a 50Ohm single-ended impedence, move one of the 5V_P bypass caps close to the SoM end of the USB2 diff pair, add meanders to the ENET_TXC, ENET_TX_CTL, ENET_RX_CTL in order to ensure these segments are matched to the long ENET_RXC segment (56.051mm, the rest of the RGMII signals are <10mm skew from this length and don't need adjusting, re-route the SIM card such that UIM-RESET is routed in between UIM-CLK and UIM-DATA as recommended by a BB manufacturer
parent 294b77fb
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 16 24
Title "Audio"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 3 24
Title "Battery"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 5 24
Title "Boot Configuration"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 14 24
Title "Buttons & LED"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 13 24
Title "MIPI CSI"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 12 24
Title "MIPI DSI"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
This diff is collapsed.
(export (version D)
(design
(source /home/ekuzmenko/dvk-mx8m-bsb/dvk-mx8m-bsb.sch)
(date "Tue 14 Aug 2018 01:30:15 AM EDT")
(date "Tue 14 Aug 2018 05:13:43 PM EDT")
(tool "Eeschema 5.0.0")
(sheet (number 1) (name /) (tstamps /)
(title_block
(title "Librem 5 Dev Kit")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source dvk-mx8m-bsb.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -19,7 +19,7 @@
(title "USB Type C")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source usb-c.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -30,7 +30,7 @@
(title Battery)
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source battery.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -41,7 +41,7 @@
(title Power)
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source power.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -52,7 +52,7 @@
(title "Boot Configuration")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source boot.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -63,7 +63,7 @@
(title RTC)
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source rtc.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -74,7 +74,7 @@
(title "UART Debug")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source uart.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -85,7 +85,7 @@
(title JTAG)
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source jtag.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -96,7 +96,7 @@
(title "USB Hub + SDIO Bridge")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source usb_hub_sdio.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -107,7 +107,7 @@
(title "uSD Card")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source sd.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -118,7 +118,7 @@
(title MIPI)
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source mipi.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -129,7 +129,7 @@
(title "MIPI DSI")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source dsi.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -140,7 +140,7 @@
(title "MIPI CSI")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source csi.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -151,7 +151,7 @@
(title "Buttons & LED")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source buttons_led.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -162,7 +162,7 @@
(title "WWAN mPCIe")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source wwan_mpcie.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -173,7 +173,7 @@
(title Audio)
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source audio.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -184,7 +184,7 @@
(title Ethernet)
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source ethernet.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -195,7 +195,7 @@
(title "WLAN+BT M.2")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source wifi_bt_m2.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -206,7 +206,7 @@
(title HDMI)
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source hdmi.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -217,7 +217,7 @@
(title Sensors)
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source sensors.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -228,7 +228,7 @@
(title "SPI NOR Flash")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source flash.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -239,7 +239,7 @@
(title "Smart Card")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source smartcard.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -250,7 +250,7 @@
(title GNSS)
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source gnss.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......@@ -261,7 +261,7 @@
(title "Haptic/Vibration Motor")
(company "Copyright 2018 GNU GPLv3")
(rev v0.1.0)
(date 2018-07-17)
(date 2018-08-14)
(source haptic.sch)
(comment (number 1) (value eric.kuzmenko@puri.sm))
(comment (number 2) (value angus.ainslie@puri.sm))
......
No preview for this file type
......@@ -2280,12 +2280,12 @@ $EndComp
$Comp
L dvk-mx8m-bsb:Fiducial FID102
U 1 1 5B34A33F
P 2000 9450
F 0 "FID102" H 2000 9625 60 0000 C CNN
F 1 "Fiducial" H 2000 9550 60 0000 C CNN
F 2 "dvk-mx8m-bsb:Fiducial" H 2000 9450 60 0001 C CNN
F 3 "" H 2000 9450 60 0001 C CNN
1 2000 9450
P 1300 10700
F 0 "FID102" H 1300 10875 60 0000 C CNN
F 1 "Fiducial" H 1300 10800 60 0000 C CNN
F 2 "dvk-mx8m-bsb:Fiducial" H 1300 10700 60 0001 C CNN
F 3 "" H 1300 10700 60 0001 C CNN
1 1300 10700
1 0 0 -1
$EndComp
$Comp
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 17 24
Title "Ethernet"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 21 24
Title "SPI NOR Flash"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 23 24
Title "GNSS"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 24 24
Title "Haptic/Vibration Motor"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 19 24
Title "HDMI"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 8 24
Title "JTAG"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 11 24
Title "MIPI"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 4 24
Title "Power"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 6 24
Title "RTC"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 10 24
Title "uSD Card"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 20 24
Title "Sensors"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 22 24
Title "Smart Card"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 7 24
Title "UART Debug"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 2 24
Title "USB Type C"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 9 24
Title "USB Hub + SDIO Bridge"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 18 24
Title "WLAN+BT M.2"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
......@@ -6,7 +6,7 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 15 24
Title "WWAN mPCIe"
Date "2018-07-17"
Date "2018-08-14"
Rev "v0.1.0"
Comp "Copyright 2018 GNU GPLv3"
Comment1 "eric.kuzmenko@puri.sm"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment