Commit d30c5fd1 authored by Eric Kuzmenko's avatar Eric Kuzmenko

Modify the antennas' feedlines for a 1.1mm nominal thickness board using a relat

ive permittivity of 4.1~4.11

The H parameter in the calculations was +0.21mm greater than the H used in the p
rototype calculations (1.1mm thick board instead of 0.89mm thick)

A DK value of 4.11 was used for the GNSS and WWAN antennae feedlines and a DK of 4.1 was used for the Wi-Fi/BT feedlines since the operating frequency of the GNSS and WWAN is generally a bit lower than Wi-Fi/BT.

The NANYA NP-180TL spec sheet is also included. The specific prepreg/core/substrate/dielectric used is NANYA NP-180**TL** which has a DK specified as 4.1-4.3 @ 1GHz.
parent 199f75a2
This diff is collapsed.
(module ACM4-5036-A1-CC-S (layer F.Cu) (tedit 5B904080)
(module ACM4-5036-A1-CC-S (layer F.Cu) (tedit 5BD9DB17)
(tags "Chip Antenna")
(solder_mask_margin 0.000001)
(attr smd)
......@@ -17,8 +17,8 @@
(fp_line (start -1.875 -3.275) (end -1.875 3.275) (layer F.Fab) (width 0.1))
(fp_line (start 1.875 -3.275) (end -1.875 -3.275) (layer F.Fab) (width 0.1))
(fp_line (start 4.9 -6.2) (end -2.4 -6.2) (layer Dwgs.User) (width 0.05))
(fp_line (start 4.9 -1.585) (end 4.9 -6.2) (layer Dwgs.User) (width 0.05))
(fp_line (start 4.9 10.8) (end 4.9 -0.115) (layer Dwgs.User) (width 0.05))
(fp_line (start 4.9 -1.677) (end 4.9 -6.2) (layer Dwgs.User) (width 0.05))
(fp_line (start 4.9 10.8) (end 4.9 -0.023) (layer Dwgs.User) (width 0.05))
(fp_line (start -2.4 10.8) (end 4.9 10.8) (layer Dwgs.User) (width 0.05))
(fp_circle (center 0 4.075) (end 0 4.15) (layer F.SilkS) (width 0.15))
(fp_line (start -2.225 3.575) (end -2.225 1.15) (layer F.SilkS) (width 0.15))
......@@ -44,8 +44,8 @@
(fp_line (start 0.2 -4.4) (end 1 -5.2) (layer Dwgs.User) (width 0.05))
(fp_line (start -0.6 -4.4) (end 0.2 -5.2) (layer Dwgs.User) (width 0.05))
(fp_line (start -1.4 -4.4) (end -0.6 -5.2) (layer Dwgs.User) (width 0.05))
(fp_line (start 3.9 -0.115) (end 4.9 -0.115) (layer Dwgs.User) (width 0.05))
(fp_line (start 3.9 9.8) (end 3.9 -0.115) (layer Dwgs.User) (width 0.05))
(fp_line (start 3.9 -0.023) (end 4.9 -0.023) (layer Dwgs.User) (width 0.05))
(fp_line (start 3.9 9.8) (end 3.9 -0.023) (layer Dwgs.User) (width 0.05))
(fp_line (start -1.4 9.8) (end 3.9 9.8) (layer Dwgs.User) (width 0.05))
(fp_line (start -1.4 3.3) (end -1.4 9.8) (layer Dwgs.User) (width 0.05))
(fp_line (start 1.9 3.3) (end -1.4 3.3) (layer Dwgs.User) (width 0.05))
......@@ -60,8 +60,8 @@
(fp_line (start 1.9 -1.6) (end 1.15 -1.6) (layer Dwgs.User) (width 0.05))
(fp_line (start 1.9 -1.45) (end 1.9 -1.6) (layer Dwgs.User) (width 0.05))
(fp_line (start 4.9 -1.45) (end 1.9 -1.45) (layer Dwgs.User) (width 0.05))
(fp_line (start 3.9 -1.585) (end 4.9 -1.585) (layer Dwgs.User) (width 0.05))
(fp_line (start 3.9 -5.2) (end 3.9 -1.585) (layer Dwgs.User) (width 0.05))
(fp_line (start 3.9 -1.677) (end 4.9 -1.677) (layer Dwgs.User) (width 0.05))
(fp_line (start 3.9 -5.2) (end 3.9 -1.677) (layer Dwgs.User) (width 0.05))
(fp_line (start -1.4 -5.2) (end 3.9 -5.2) (layer Dwgs.User) (width 0.05))
(fp_line (start -1.4 -4.4) (end -1.4 -5.2) (layer Dwgs.User) (width 0.05))
(fp_line (start 1.9 -4.4) (end -1.4 -4.4) (layer Dwgs.User) (width 0.05))
......@@ -115,10 +115,10 @@
(pad 2 smd rect (at -1.9 -4.175) (size 1 4.05) (layers F.Cu))
(pad 2 smd rect (at 1.25 -5.7) (size 7.3 1) (layers F.Cu)
(zone_connect 2))
(pad 2 smd rect (at 4.4 -3.8925) (size 1 4.615) (layers F.Cu)
(pad 2 smd rect (at 4.4 -3.9385) (size 1 4.523) (layers F.Cu)
(zone_connect 2))
(pad 2 smd rect (at 1.25 10.3) (size 7.3 1) (layers F.Cu)
(zone_connect 2))
(pad 2 smd rect (at 4.4 5.3425) (size 1 10.915) (layers F.Cu)
(pad 2 smd rect (at 4.4 5.3885) (size 1 10.823) (layers F.Cu)
(zone_connect 2))
)
(module FR05-S1-NO-1-004 (layer F.Cu) (tedit 5B79B319)
(module FR05-S1-NO-1-004 (layer F.Cu) (tedit 5BD9D87E)
(solder_mask_margin 0.000001)
(attr smd)
(fp_text reference REF** (at 0 5.2) (layer F.SilkS)
......@@ -30,16 +30,16 @@
(fp_line (start -3.175 1.175) (end 3.175 1.175) (layer F.Fab) (width 0.1))
(fp_line (start 3.175 1.175) (end 3.175 -1.175) (layer F.Fab) (width 0.1))
(fp_circle (center -2.95 0) (end -2.875 0) (layer F.Fab) (width 0.15))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 2 smd rect (at -0.35 7.3) (size 16.7 5.6) (layers B.Cu))
(pad 2 smd rect (at -7.5 4.3) (size 2.4 11.6) (layers B.Cu))
(pad 2 smd rect (at -9.15 8.9) (size 5.7 2.4) (layers B.Cu))
(pad 1 smd rect (at -4.6 5.1858) (size 1.3716 1.3716) (layers F.Cu))
(pad 1 smd rect (at -4.6 2.8358) (size 0.4 6.0716) (layers F.Cu))
(pad 1 smd rect (at -4.6 5.451) (size 1.902 1.902) (layers F.Cu))
(pad 1 smd rect (at -4.6 3.101) (size 0.4 6.602) (layers F.Cu))
(pad 1 smd rect (at -3.35 0) (size 2.9 0.4) (layers F.Cu))
(pad 2 smd rect (at -10.8 4.3) (size 2.4 11.6) (layers B.Cu))
(pad 3 smd rect (at 2.55 0) (size 1.3 2.4) (layers F.Cu F.Paste F.Mask))
(pad 1 smd rect (at -2.55 0) (size 1.3 2.4) (layers F.Cu F.Paste F.Mask))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
)
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment