1. 19 Aug, 2018 1 commit
  2. 10 Aug, 2018 1 commit
  3. 06 Aug, 2018 1 commit
  4. 06 Jul, 2018 1 commit
  5. 29 Jun, 2018 1 commit
    • Eric Kuzmenko's avatar
      Move USB-C, Mini-HDMI, RJ45, and 3.5mm jack receptacles to the bottom of the... · 71d87ac3
      Eric Kuzmenko authored
      Move USB-C, Mini-HDMI, RJ45, and 3.5mm jack receptacles to the bottom of the board, also place the Micro-SD card slot to the left of all of the receptacles centered at the bottom, place the Smart-Card slot just above the Micro-SD card facing the left, add 3D models to each of the respective connectors/sockets
      
      The order of the various receptacles and sockets can be changed bit the pitch between them should stay about the same since it is currently as tightly packed asreasonably possible (1.5~2.5mm clearance between connectors).
      71d87ac3
  6. 26 Jun, 2018 1 commit
  7. 22 Jun, 2018 2 commits
    • Eric Kuzmenko's avatar
      Adjust the SoM outline footprint by rotating it 90 degrees and making the... · 3206bfc9
      Eric Kuzmenko authored
      Adjust the SoM outline footprint by rotating it 90 degrees and making the reference and value text the standard size (reference is now invisible), did the same for the SoM connector footprint (reference is visible), added baseboard connector 3D model to the EmCr_SOM_IMX8M_Connector footprint, removed the P1 connector from the SoM 3D model since P1 is now assigned to the EmCr_SOM_IMX8M_Connector footprint
      3206bfc9
    • Christian Schilmoeller's avatar
      Small change in footprint assignment of the SOM: · 12e88a43
      Christian Schilmoeller authored
      Old situation:
      First footprint of the SOM contains outline, mounting holes, footprint of P1 and markers for positions of P2, P3 and P4.
      Second, third and forth footprint contain only P2..P4 connectors.
      This situation leads to a problem with the BoM, because the 4 identical connectors could not be grouped together.
      
      New situation:
      Outline, mounting holes and position markers are now located in the footprint which is assigned to the SOM placeholder
      4 identical footprints assigned to the SOM's connectors P1..P4 contain only the connector footprint.
      This shouldn't cause problems with the BoM.
      12e88a43