changelog 24.1 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
librem5-devkit-tools (0.0.15) amber-phone; urgency=medium

  [ Guido Günther ]
  * gitlab-ci: Use evergreen
  * pytest: Don't fail touch test on devkit
  * pytests: Check for SCSI disk
  * pt/test_panel_brightness: Reduce devkit brightness to 100
  * pt/test_panel_brightness: Test max_brightness as well
  * librem5-flash-image: Make evergreen the default
  * librem5-flash-image: Detect board type via argv[0] (Closes: #30)
  * scripts: Run doctests on librem5_flash_image
  * librem5-host: Install symlinks for librem5 batches as well
  * librem5-flash-image: Add test for default script name

  [ Angus Ainslie ]
  * pytests/test_panel_brightness.py: make range inclusive

  [ Martin Kepplinger ]
  * pytests: test_modem: use mmcli -m any

  [ David Hamner ]
  * librem5-flash-image: Don't fail on default script name
  * librem5-flash-image: Wait for device

 -- Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>  Thu, 21 Jan 2021 19:21:12 +0100

27 28 29 30 31 32 33
librem5-devkit-tools (0.0.14) amber-phone; urgency=medium

  [ Martin Kepplinger ]
  * pytests: test_cameras: update to runtime pm sysfs interface

 -- Martin Kepplinger <martin.kepplinger@puri.sm>  Mon, 30 Nov 2020 19:50:59 +0100

34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70
librem5-devkit-tools (0.0.13) amber-phone; urgency=high

  [ Guido Günther ]
  * librem5-flash-image: Fix help
  * librem5-flash-image: Use amber-phone as default
  * librem5-flash-image: Use revision for uuu_mods too
    No need to pass both
  * librem5-flash-image: Use dogwood by default
  * flash-image: Drop unused global
  * flash-image: Print defaults
    This makes it simpler for people who found --help
  * debian: Add librem5-flash-image manpage based on help output
  * debian: Add flash-image deps as build-deps
    This ensure help2man can work
  * librem5-flash-image: Support r4

  [ Martin Kepplinger ]
  * pytests: add basic test for the torch
  * pytests: add basic test for gnss
  * pytests: add basic test for the status led
  * pytests: add basic test for usb0 network device
  * pytests: test_audio: check existence of both modem and codec cards
  * pytests: add basic test for the m41t80 rtc
  * pytests: add touchscreen firmware version check

  [ Angus Ainslie ]
  * uuu_scripts/burn_fuses_dogwood.lst: move the version number
  * uuu_scripts/burn_fuses_evergreen.lst: add a script to burn the evergreen fuses
  * debian/librem5-check.install: copy the switch test
  * test_scripts/keys_test.py: add a cli based key test
  * debian/librem5-check.install: install the key test

  [ Dorota Czaplejewicz ]
  * pytests: Test i2c communication with cameras

 -- Martin Kepplinger <martin.kepplinger@puri.sm>  Fri, 13 Nov 2020 11:55:44 +0100

71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103
librem5-devkit-tools (0.0.12) amber-phone; urgency=medium

  [ Sebastian Krzyszkowiak ]
  * Remove /etc/network/interfaces.d/usb0 file

  [ Angus Ainslie (Purism) ]
  * compare_flash.sh: add a script to check the flash contents

  [ Martin Kepplinger ]
  * pytests: support new Board names for hardware revisions
  * pytests/test_modem.py: add support for the bm818 alsa device name

  [ Guido Günther ]
  * librem5-devkit-flash-image: Report proper error when job wasn't found
  * librem5-devkit-flash: Strip board revision from uboot board name
  * librem5-devkit-flash-image: Use images with revision
  * gitlab-ci: Use librem5r3 for the download test (Closes: #24)
  * gitlab-ci: Keep uuu script around
  * gitlab-ci: Be less picky about image names
  * Drop devkit from flash script name
  * Drop devkit from host package
  * Drop devkit from udev rule name
  * Drop devkit from check package
  * Drop udev rule that gives the dialog group access to the gnss subsytem
    (Closes: #26)

  [ Angus Ainslie ]
  * 99-gnss.rules: Add a udev rule
  * scripts: flash-image: add a script to flash local images
  * uuu_scripts: drop deprecated scripts

 -- Martin Kepplinger <martin.kepplinger@puri.sm>  Mon, 21 Sep 2020 11:03:08 +0200

104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128
librem5-devkit-tools (0.0.11) amber-phone; urgency=medium

  [ Kyle Evans ]
  * scripts/fetch_latest: update next kernel_url

  [ Guido Günther ]
  * Remove /etc/profile.d/etnaviv.sh conf file
  * write_ext2_file.sh: Fix partition number warning
  * write_*.sh: Don't sudo
  * u-boot_flash_librem5: Don't claim to flash m4.bin when we don't
  * u-boot_flash_recovery_librem5-devkit.lst: Don't claim to flash m4.bin when we don't
  * boot_emmc_devkit: Use the correct uboot

  [ Angus Ainslie ]
  * gitlab-ci.yml : test on an image that is maintained
  * modem_gps.sh: Add a script to use the WWAN modem GPS

  [ Sebastian Krzyszkowiak ]
  * uuu_scripts: Add scripts to boot a specified kernel version from /boot partition

  [ Martin Kepplinger ]
  * remove usr/bin/power_key.py

 -- Martin Kepplinger <martin.kepplinger@puri.sm>  Tue, 23 Jun 2020 11:11:52 +0200

129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145
librem5-devkit-tools (0.0.10) amber-phone; urgency=medium

  [ Martin Kepplinger ]
  * pytests: Add test_devfreq.py for testing the memory devfreq driver
  * pytests/test_magn.py: modprobe the driver module before using it
  * pytests/test_modem.py: fix aplay -l output capturing
  * pytests/test_panel_brightness: fix sysfs path
  * pytests/test_regulators: use correct regulator for GPU
  * debian/changelog: fix v0.0.9 release notes
  * power_key.py: make compatible with 5.6 and later and the devkit

  [ Guido Günther ]
  * Drop no_supertile workarounds
  * pytests: Test that there aren't any probe defers

 -- Martin Kepplinger <martin.kepplinger@puri.sm>  Sun, 05 Apr 2020 13:45:22 +0200

146 147
librem5-devkit-tools (0.0.9) amber-phone; urgency=medium

148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165
  [ David Boddie ]
  * Add host and device scripts for USB networking
  * Add initial visual test for switches
  * switch test: Coding style fixes
  * switch_test: Fix pep8 noise
  * switch_test: Remove unused module import
  * switch_test: Show initial key states, report changes
  * switch_test: Report initial states, customize printed output
  * switch_test: Add copyright and summary
  * switch_test: Remove power button checks

  [ Martin Kepplinger ]
  * pytests: test_magn: fix test function name
  * pytests: add simple accelerometer test
  * pytests: test_cpuidle: remove governor check
  * modprobe.d: update template entries for mainline redpine driver
  * test_scripts: l5dvk-test-log: fix gyro driver name
  * modprobe.d: blacklist magnetometer driver
166
  * power_key: use 25Mhz devfreq when screen off when not on Linux 5.3
167 168 169 170 171 172 173 174 175 176 177
  * Revert "pytests/test_accel.py: Update the tests for the accelerometer"
  * power_key: adjust devfreq sysfs naming to linux 5.6
  * power_key: use with open() as f instead of open() and close()

  [ Dorota Czaplejewicz ]
  * network: Don't manage usb0

  [ Angus Ainslie ]
  * uuu_scripts: add some scripts to aid kernel testing
  * test_scripts: Add a script for gps testing
  * pytests/test_accel.py: Update the tests for the accelerometer
178
  * pytests/test_usb_hub.py: test the phone usb hub
179 180 181 182 183 184
  * pytests/test_modem.py: Add modem test for the phone
  * pytests/test_audio.py: use the dat format

  [ Guido Günther ]
  * modules: Load ledtrig-timer
  * librem5-devkit-check: Depend on alsa-utils
185
  * pytests: Use correct backlight device on the phone
186 187 188 189 190
  * pytests: Use correct input match for the phone
  * pytest: Use correct audio device on the librem5
  * pytests: Test gpu regulator voltage

  [ Angus Ainslie (Purism) ]
191
  * librem5-devkit-flash-image: Add a dogwood flash target
192 193 194 195 196 197
  * librem5-devkit-host.librem5_devkit.udev: add a rule for the librem5 vid:pid
  * scripts/burn_fuses: add a script to set the dogwood fuses
  * uuu_scripts: add the librem5 VID:PID

  [ Sebastian Krzyszkowiak ]
  * base: Unset ETNA_MESA_DEBUG in profile.d
198 199 200

 -- Martin Kepplinger <martin.kepplinger@puri.sm>  Tue, 03 Mar 2020 16:01:45 +0100

201 202 203 204 205 206 207
librem5-devkit-tools (0.0.8) amber-phone; urgency=medium

  * l5-shipme: Drop sudo.
    The script needs to run as root anyway

 -- Guido Günther <agx@sigxcpu.org>  Thu, 26 Dec 2019 11:42:23 +0100

208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243
librem5-devkit-tools (0.0.7) amber-phone; urgency=medium

  [ Angus Ainslie ]
  * scripts/write_flash.sh: drop recovery
  * scripts/fetch_latest.sh: update for the uified kernel and librem5 u-boot
  * scripts/librem5-devkit-flash-image: add an arg for the board type
  * power_key.py: get rid of suspend labels

  [ Guido Günther ]
  * Depend on i2c-tools for battery shipment mode
  * Add script to clean up after smoke tests
  * Link shipment script as l5s

  [ Angus Ainslie ]
  * write_ext2_file.sh: remove another instance of recovery
  * test_librem5.lst: add some i2c and LED tests
  * uuu_scripts: remove the recovery labels from the comments
  * scripts/test_librem5.lst: comment out broken tests
  * robot/uboot_tests.robot: add tests using the robot framework for chestnut
  * shipping_mode.lst: a uuu script to put the phone into shipping mode

  [ Guido Günther ]
  * pytests: Add helpers to skip tests on the devkit and phone
  * test_audio: Use skipif to distinguish phone and devkit test

  [ Sebastian Krzyszkowiak ]
  * librem5-devkit-base: Depend on python3-evdev

  [ Angus Ainslie ]
  * librem5-devkit-flash-image: use the correct URLs for the phone
  * librem5-devkit-flash-image: add the plain image
  * gitlab-ci.yml: there is no recovery u-boot right now
  * l5-shipme: disable battery after 10-15 seconds for ship mode

 -- Angus Ainslie <angus@akkea.ca>  Wed, 18 Dec 2019 15:05:54 -0800

244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268
librem5-devkit-tools (0.0.6) amber-phone; urgency=medium

  [ Angus Ainslie ]
  * burn_fuses.lst: add a uuu scipt to burn the bootcfg fuses.
    This script will burn the fuses that allow the board to be booted from eMMC
  * u-boot_flash_librem5.lst: increase the size of the flashed u-boot
  * write_flash.sh: exit when flashing is finished
  * write_flash.sh: verify the flash contents.
    After writeing the flash read back the contents and compare
  * u-boot_fastboot_librem5.lst: add a test to force fastboot mode
  * power_key: add a hack to adjust frequencies depending on screen blank
  * power_key.service: restart on failure

  [ Angus Ainslie (Purism) ]
  * drop the m4 for now

  [ Guido Günther ]
  * power_key: Use dh_installsystemd.
    This will simplify updates, unclutter etc and make us get rid of the hack
    easier (by just dropping the unit file).
  * librem5-devkit-base: Depend on python3.
    There's a python script for the power button in there now.

 -- Guido Günther <agx@sigxcpu.org>  Tue, 26 Nov 2019 22:30:59 +0100

Bob Ham's avatar
Bob Ham committed
269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296
librem5-devkit-tools (0.0.5) amber-phone; urgency=medium

  [ Guido Günther ]
  * tests: Check for cpufreq platform driver
  * tests: Check cpu idle governor
  * tests: Check if a wifi interface got detected

  [ Bob Ham ]
  * Remove Wys systemd .conf file
  * librem5-devkit-base: Fix Breaks: field for wys

  [ Angus Ainslie ]
  * uuu_scripts: update the scripts for the new u-boot protocol
  * uuu_scripts: Add the phone boot and flash scipts
  * Drop recovery for now

  [ Angus Ainslie (Purism) ]
  * write_flash.sh: add a script to program the SPI flash
  * librem5-devkit-flash-image: update to the new SDPV protocol
  * ramfs_librem5-devkit.lst: give the script a better descriptive name
  * uuu_scripts: Add some more phone uuu scripts
  * uuu_scripts/boot_librem5-devkit.lst: script to boot a kernel from the host

  [ Martin Kepplinger ]
  * test_scripts/power_key: select input device with name

 -- Bob Ham <bob.ham@puri.sm>  Fri, 22 Nov 2019 09:34:19 +0000

297 298 299 300 301 302 303 304 305 306 307
librem5-devkit-tools (0.0.4) amber-phone; urgency=medium

  * gitignore Debian specific files
  * d/gbp.conf: Setup so 'gbp tag' works out of the box
  * d/control: Expand description
  * d/rules: Properly skip tests with 'nocheck'
  * d/copyright: Switch paragraphs.
    Wildcard needs to go first.

 -- Guido Günther <agx@sigxcpu.org>  Mon, 14 Oct 2019 10:40:54 +0200

308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538
librem5-devkit-tools (0.0.3) amber-phone; urgency=medium

  [ Guido Günther ]
  * flash-image: Make lack of meta data fatal.
    This was just a band aid until
        https://source.puri.sm/Librem5/image-builder/merge_requests/73
    got merged to not break image flashing.
  * postinst: Add missing interpreter
  * librem5-devkit-flash-image: Allow to skip flashing.
    This allows to use the download machinery but not flash anything.
    Useful to prepare everything on another machine.
  * gitlab-ci: Test librem5-devkit-flash-image download.
    We can't test the actual flashing but that's most of what the script
    does atm.
    This will make us spot things like fixed in !1 early.
  * librem5-devkit-flash-image: Print retry messages at debug level.
    Messes up the progress bar otherwise.
  * gitlab-ci: Drop mkdir.
    Librem5-devkit-flash-image creates it so let's test that code path as
    well.
  * Disable supertiles on the devkit.
    Add this work around until we fixed supertile textures on GC7000.
  * tests: Panel brightness can range from 0 to 100 now.
  * Don't require a password for sudo.
    Makes hacking on the devkit more convenient. (Closes: #12)
  * d/control: Add missing python3-yaml dependency.
    We use it in librem5-devkit-flash-image
  * Add requirements.txt.
    This makes is simpler for people not using a distribution and other
    operating systems.
  * gitlab-ci: Add test using modules from pypi
  * librem5-devkit-flash-image: We always fetch meta data.
    No need to check if it's set
  * librem5-devkit-image: Don't redownload image if it's recent
    (Closes: #14)
  * uuu_scripts: Drop flash_librem5-devkit-test.lst.
    It's the same as flash_librem5-devkit.lst but with a different image
    name.
  * uuu_scripts: Explain each script's purpose in a comment
  * uuu_scripts: Give an idea what this directory does
  * gitignore: Add files/
    The uuu scripts reads volatile files from there that are not part of
    this repo.
  * tests: Test cpufreq.
  * tests: brightness: Adjust node name for Linux 5.x.
    The device tree we upstream has a different node name.
  * tests: Test for magnetometer.
    We care about the magnetometer not the gyro for iio-sensor-proxy
    support.
  * tests: Fix test name.
    We test cpufreq not the battery
  * librem5-devkit-check: Make shellcheck happy
  * librem5-devkit-test: shellcheck
  * librem5-devkit-check: Don't write out byte code files.
    Since we run as root we don't want to clutter the test directory with
    python byte code files. For detailed test debugging folks will likley
    invoke pytest-3 manually so this doesn't matter a lot performance wise.
  * librem5-devkit-check: Comlain when not run with super user privileges.
    We need eleveated privileges for some tests.
  * tests: Test touch controller.
    Test that the goodix touch controller is available. If this test
    succeeds we know that the device was probed successfully on the I²C bus
    and that it got registered with the input subsystem.
  * tests: Add pytest to test modem availability.
    If these test succeed we know that the modem is visible on the USB
    bus and the modem manager picked it up.
  * tests: Add pytest to test some audio aspects.
    This tests if the code is there (probed) correctly and if the
    headphone IRQ is registered.
  * tests: Add system information to test output.
    Add
    - image git revision: the revision of the image-builder repo
      https://source.puri.sm/Librem5/image-builder
    - kernel version
    - device tree model
    to the test output. This makes the sole output of test run more useful.
  * tests: Check for cpuidle sysfs nodes.
    This is not sufficient to ensure cpuidle works but is at least
    makes sure we don't lose basic kernel support.
  * tests: Check for drm render node
  * Move initial board-bringup notes to doc/
  * Remove doc building step.
  * Add minimal README.
    This guides people to the official docs to avoid duplication.
  * tests: Make a module
  * tests: Add sysfs helper module.
    We can add common functions here to avoid code duplication
  * tests: Don't hardcode iio sysfs path.
    Based on Martin's MR
    https://source.puri.sm/Librem5/librem5-devkit-tools/merge_requests/71
  * Move tests to pytests.
    This makes installing them simpler since we don't have to distinguish
    between these and other python based tests and programs.
  * Test for proximity sensor sysfs node.
    This can become more elaborate in the future.
  * docs: Mention the pytest based tests.
    This hopefully encourages people to add more tests when we enable more
    hardware.
  * pytests: Move drm test to pytests/
    This one got added before we moved the tests.
  * test_scripts: Drop conftest.py.
    It should only be in pytests/
  * pytests: Check if modem is visible to alsa

  [ Dorota Czaplejewicz ]
  * Use g_multi instead of g_serial to deliver Ethernet
  * Make USB use DHCP
  * Devkit: Resume image download on errors
  * devkit-flash: Allow for configureable number of retries.
  * flash-kernel: Add root kernel cmdline parameter.
  * base: Add flash-kernel and mtd-tools to the dependency list
  * base: Add u-boot-tools as a hard dependency of our flash-kernel version
  * base: Resize rootfs after it's mounted

  [ Johannes Krampf ]
  * Readme: Fix file name for uuu flash script.

  [ Esteban Torre ]
  * Remove debug proxy
  * add debug support to uuu in flash script.

  [ Angus Ainslie (Purism) ]
  * librem5-devkit.conf: enable antenna diversity for the RS9116 module
  * Add a uuu script that flashes the full-boot-image.
    u-boot-builder can generate a "full-boot-image" that contains an
    m4.img and an imx u-boot.
  * Update fetch-latest urls.
    Update the kernel, u-boot and recovery u-boot urls.
    Drop the image download.
  * librem5-devkit-flash-image: choose a specific board variant.
    Choose between legacy, current and next build types
  * librem5-devkit.conf: don't blacklist the rsi_sdio driver.
    The driver works sometimes so enable it to collect more data.
  * There are 3 temperature sensors so report all of them if they are present
  * Add shell based static tests.
    This is a script that does some basic tests to ensure that certain
    subsystems are present. It duplicates functionality from other tests so
    should be refactored at some point.

  [ Angus Ainslie ]
  * uuu_scripts: u-boot_flash_librem5-devkit.lst : flash the correct u-boot.
    The script was flashing the -recovery u-boot. It now flashes the
    regular u-boot and the required m4 binary.
  * uuu_scripts: u-boot_flash_recovery_librem5-devkit.lst: add a script to
    flash the recovery u-boot.
    This will flash the -recovery version of u-boot to the eMMC so that
    the m4.bin is not required.
  * Fix broken documentation link
  * Add a test for the gpio-vibration driver
  * Add a test "daemon" to differentiate short vs long press on the power key.
  * pytests: Add test for audio output
  * README.md : fix broken documentation link
  * base: Add mmc-tools.
    Trying to debug boot issues from eMMC so install mmc-tools
  * Revert "base: Add mmc-tools"
    It's not mmc-tools it's mmc-utils
    This reverts commit 19cd107993ffa8db0e860d155374ee5311242abd.
  * base: Add mmc-utils.
    Trying to debug boot issues from eMMC so install mmc-utils
  * librem5-devkit-flash-image: update the uboot job name.
    U-boot builds have ben moved
  * vibra_test.py: use python3 on the target
    python3 has all of the correct dependencies
  * power_key.py: use python3 on the target
    python3 has all of the correct dependencies
  * librem5-devkit-check.install: Copy more of the tests
    vibra_test.py is needed to test the haptic motor
    power_key.py tests suspend and shutdown
  * debian/control: add rfkill.
    Add rfkill to interact with the HKS
  * librem5-devkit.conf: blacklist the mainline kernel driver.
    As the mainline driver doesn't yet load firmare from flash use the
    redpine one for now.
  * uuu_scripts: Add scripts to flash and set the boot partitions.
    The boot partitions are small ( 4MB ) partions that can hold a boot
    loader. The eMMC can be setup to boot from the user partition or either
    one of the boot partitons. The flash_* scripts will flash u-boot into
    the boot partitions and the set_* scripts will select the boot
    partition.
  * write_ext2_file.sh: write a file to partition 0.
    This script uses uuu to write a file into partition 0 of the eMMC. Linux
    mounts this partition as /boot so the files can be accessed from
    userspace.
  * librem5-devkit.conf: set the correct mode for the redpine driver

  [ Hugo Grostabussiat ]
  * Select the MMC hwpart before writing.
    Explicitly select the user area partition before attempting to write
    to the eMMC.
    The currently selected MMC hwpart could be anything set by a previous
    script or some boot software. Since this script is meant to write the
    boot image in the user area, we ensure that it is the active hwpart.
  * Fix the image size in the `mmc write` command.
    The full size of the boot image is 0x83e blocks (1055 KiB).
    It used to be 0x800 blocks (1024 KiB) before the M4 image (0x3e blocks
    (31 KiB)) was merged in. This commit replaces that old value with the
    new one.
  * Immediately fail image verify if sizes don't match.
    When verifying image integrity, first check the image file size against
    the one from the manifest. If they are different, fail immediately,
    without computing the SHA-256 hash of the image since we know it will be
    wrong.
    Unfortunately, there is no speed gain to expect from this optimization
    in the common case, since the uncompressed size of the image rarely
    change between builds. However, in cases where there are remains of a
    partially downloaded image, a new download will be attempted almost
    immediately.

  [ Bob Ham ]
  * Configure Wys for the devkit.
    Add a systemd .conf file to extend the wys.service unit with
    configuration for the devkit audio hardware.
  * Add minimal ALSA UCM configuration for the SGTL5000.
    This allows us to set the microphone volume which PulseAudio uses by
    default.  The configuration is not split into codec-specific parts as
    this is not necessary, the configuration's only purpose is to allow us
    to set the microphone volume which PulseAudio uses and it's not clear
    whether ALSA's UCM will be useful going forward.
    Closes OS-issues#46
  * Add PulseAudio configuration for Librem 5 devkit.
    We need a custom script in order to set the default source and sink.

  [ Scrooge McDuck ]
  * README: various changes

  [ Clayton Craft ]
  * librem5-devkit-flash-image: Use env to get python binary location.
    This allows the script to work when python is in a virtualenv.

 -- Guido Günther <agx@sigxcpu.org>  Sat, 28 Sep 2019 18:41:47 +0200

539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580
librem5-devkit-tools (0.0.2) green; urgency=medium

  [ Guido Günther ]
  * Add framebuffer test script
  * librem5-devkit-check.install: Docment scripts a little
  * Install fb-color script
  * checks: Depend on python3
  * Add package that keeps devkit base config.
    This is somewhat similar to librem5-base but keeps devkit specific
    configuration. We will later likely introduce a librem5-phone-base
    for the phone.
  * Add g_serial for USB serial console
  * Add Redpine Wifi config
  * Add script to automatically unzip newly installed kernels.
    Our uboot wants uncompressed kernels. Make sure this happens on kernel
    package updates.
  * Add uuu_scripts as examples
  * Add script to downlaod and flash the latest devkit image
  * d/rules: Run checks during build
  * librem5-devkit-base: Enable console over USB
  * flash-image: Get size from meta data.
    This makes sure the progress bar matches the expected image size.
    We don't make the lack of meta data fatal yet so we can use this
    script on outdated build jobs too for some time.
  * flash-image: Validate checksum of downloaded image.
    This also uses the meta data provided with the image.
  * d/control: Add python3-yaml for meta yaml parsing

  [ Dorota Czaplejewicz ]
  * get_image: Fix CI build URLs.
    The URL for the test and CI image are not built in the same way, coming
    from separate branches. This fixes it until it get sorted out in
    image-builder.

  [ Bob Ham ]
  * devkit-base: Add jitterentropy-rngd.
    This works around the RNG issue linux-emcraft#2 causing SSH logins to
    be inaccessible for five minutes on boot.  With this package, SSH is
    available immediately.

 -- Guido Günther <agx@sigxcpu.org>  Thu, 03 Jan 2019 18:14:54 +0100

581 582 583 584 585 586
librem5-devkit-tools (0.0.1) purple; urgency=medium

  * Add package for the host side
  
 -- Guido Günther <agx@sigxcpu.org>  Fri, 21 Dec 2018 14:09:54 +0100

Guido Gunther's avatar
Guido Gunther committed
587 588 589 590 591
librem5-devkit-tools (0.0.0) unstable; urgency=medium

  * Initial release

 -- Guido Günther <agx@sigxcpu.org>  Wed, 31 Jan 2018 15:02:24 +0100