Commit 5ec478ea authored by Nicole Faerber's avatar Nicole Faerber

Add power button function description.

parent bc39b62b
Pipeline #1551 passed with stage
in 3 minutes
......@@ -45,6 +45,9 @@ Each voltage is measured against ground (green circle in above image)
PIN 1 is the one closest to the volume button while PIN6 is the one closest to the power button.
* Power on/off
If the user holds the power button for ~2 seconds then a power down/reboot dialog would pop up; a quick press & release would turn the display on/off. If the button is held for ~5 seconds the SoC triggers an event to shut down, pressing it again for ~2 seconds will turn it back on. The button is also attached to the charge controller's QON# pin, which when held for ~15 seconds is able to put the dev kit into a "shipping mode" where the charge controller is completely off, or holding it for ~18 seconds will cause it to perform a complete power cycle.
* Booting via nfsroot
The SOM comes with a pre flashed u-boot so you can connect the USB-to-UART-Debug cable and boot the device.
Breaking into uboot you can boot using a nfsroot filesystem via
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment