arm64: dts: fsl: librem5: Drop commented out code

Clean out unused code segments
Signed-off-by: 's avatarAngus Ainslie (Purism) <angus@akkea.ca>
parent 9c23f44a
......@@ -109,31 +109,6 @@
};
};
#if TODO
sound-hdmi {
compatible = "fsl,imx-audio-cdnhdmi";
model = "imx-audio-hdmi";
audio-cpu = <&sai4>;
protocol = <1>;
};
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
spdif-controller = <&spdif1>;
spdif-out;
spdif-in;
status = "disabled";
};
sound-hdmi-arc {
compatible = "fsl,imx-audio-spdif";
model = "imx-hdmi-arc";
spdif-controller = <&spdif2>;
spdif-in;
};
#endif
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
......@@ -917,11 +892,6 @@
compatible = "ovti,ov5640";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_csi1>;
// TODO : add these back in at some point
/*
reset = <&gpio1 6 GPIO_ACTIVE_LOW>;
powerdown = <&gpio1 7 GPIO_ACTIVE_HIGH>;
*/
reg = <0x3c>;
status = "okay";
clocks = <&clk IMX8MQ_CLK_CLKO1_DIV>;
......@@ -1064,7 +1034,6 @@
&usb3_0 {
status = "okay";
// power-supply = <&reg_pwr_en>;
power-domains = <&usb_otg1_pd>;
};
......@@ -1086,7 +1055,6 @@
&usb3_1 {
status = "okay";
// power-supply = <&reg_pwr_en>;
power-domains = <&usb_otg2_pd>;
};
......@@ -1130,40 +1098,6 @@
status = "okay";
};
#ifdef TODO
&spdif1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif1>;
assigned-clocks = <&clk IMX8MQ_CLK_SPDIF1_SRC>,
<&clk IMX8MQ_CLK_SPDIF1_DIV>;
assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
assigned-clock-rates = <0>, <24576000>;
status = "disabled";
};
&spdif2 {
assigned-clocks = <&clk IMX8MQ_CLK_SPDIF2_SRC>,
<&clk IMX8MQ_CLK_SPDIF2_DIV>;
assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
assigned-clock-rates = <0>, <24576000>;
status = "okay";
};
&gpu_pd {
// TBD: define correct power supply
// power-supply = <&sw1a_reg>;
};
&vpu_pd {
// TBD: define correct power supply
// power-supply = <&sw1c_reg>;
};
&vpu {
status = "okay";
};
#endif
&gpu_3d {
status = "okay";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment