arm64: dts: fsl: librem5: Add set VINDPM

Due to current spikes during boot the USB-C VBUS can get drawn down too
low causing the bq25890 to reset the board. Allow VBUS to drop a bit
further to make allowance for thses spikes.
Signed-off-by: Eric Kuzmenko's avatarEric Kuzmenko <eric.kuzmenko@puri.sm>
Signed-off-by: default avatarAngus Ainslie (Purism) <angus@akkea.ca>
parent 5b18965c
Pipeline #10208 passed with stage
in 38 minutes and 30 seconds
......@@ -860,6 +860,8 @@
ti,minimum-sys-voltage = <2750000>; // 2.75V
ti,boost-voltage = <5000000>; // 5V
ti,boost-max-current = <50000>; // 50mA
ti,use-vinmin-threshold = <1>; /* enable VINDPM */
ti,vinmin-threshold = <3900000>; /* 3.9V */
};
rtc@68 {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment