Unverified Commit 1dfbf334 authored by Linus Walleij's avatar Linus Walleij Committed by Mark Brown
Browse files

spi: ep93xx: Convert to use CS GPIO descriptors



This converts the EP93xx SPI master driver to use GPIO
descriptors for chip select handling.

EP93xx was using platform data to pass in GPIO lines,
by converting all board files to use GPIO descriptor
tables the core will look up the GPIO lines from the
SPI device in the same manner as for device tree.
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 2a168e10
......@@ -29,6 +29,7 @@
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/gpio/machine.h>
#include <sound/cs4271.h>
......@@ -105,13 +106,16 @@ static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
},
};
static int edb93xx_spi_chipselects[] __initdata = {
EP93XX_GPIO_LINE_EGPIO6,
static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = {
.dev_id = "ep93xx-spi.0",
.table = {
GPIO_LOOKUP("A", 6, "cs", GPIO_ACTIVE_LOW),
{ },
},
};
static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
.chipselect = edb93xx_spi_chipselects,
.num_chipselect = ARRAY_SIZE(edb93xx_spi_chipselects),
/* Intentionally left blank */
};
static void __init edb93xx_register_spi(void)
......@@ -123,6 +127,7 @@ static void __init edb93xx_register_spi(void)
else if (machine_is_edb9315a())
edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table);
ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
ARRAY_SIZE(edb93xx_spi_board_info));
}
......
......@@ -77,13 +77,15 @@ static struct spi_board_info simone_spi_devices[] __initdata = {
* low between multi-message command blocks. From v1.4, it uses a GPIO instead.
* v1.3 parts will still work, since the signal on SFRMOUT is automatic.
*/
static int simone_spi_chipselects[] __initdata = {
EP93XX_GPIO_LINE_EGPIO1,
static struct gpiod_lookup_table simone_spi_cs_gpio_table = {
.dev_id = "ep93xx-spi.0",
.table = {
GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW),
{ },
},
};
static struct ep93xx_spi_info simone_spi_info __initdata = {
.chipselect = simone_spi_chipselects,
.num_chipselect = ARRAY_SIZE(simone_spi_chipselects),
.use_dma = 1,
};
......@@ -113,6 +115,7 @@ static void __init simone_init_machine(void)
ep93xx_register_i2c(simone_i2c_board_info,
ARRAY_SIZE(simone_i2c_board_info));
gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
gpiod_add_lookup_table(&simone_spi_cs_gpio_table);
ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
ARRAY_SIZE(simone_spi_devices));
simone_register_audio();
......
......@@ -22,6 +22,7 @@
#include <linux/spi/mmc_spi.h>
#include <linux/mmc/host.h>
#include <linux/platform_data/spi-ep93xx.h>
#include <linux/gpio/machine.h>
#include <mach/gpio-ep93xx.h>
#include <mach/hardware.h>
......@@ -269,13 +270,15 @@ static struct spi_board_info bk3_spi_board_info[] __initdata = {
* The all work is performed automatically by !SPI_FRAME (SFRM1) and
* goes through CPLD
*/
static int bk3_spi_chipselects[] __initdata = {
EP93XX_GPIO_LINE_F(3),
static struct gpiod_lookup_table bk3_spi_cs_gpio_table = {
.dev_id = "ep93xx-spi.0",
.table = {
GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW),
{ },
},
};
static struct ep93xx_spi_info bk3_spi_master __initdata = {
.chipselect = bk3_spi_chipselects,
.num_chipselect = ARRAY_SIZE(bk3_spi_chipselects),
.use_dma = 1,
};
......@@ -316,13 +319,17 @@ static struct spi_board_info ts72xx_spi_devices[] __initdata = {
},
};
static int ts72xx_spi_chipselects[] __initdata = {
EP93XX_GPIO_LINE_F(2), /* DIO_17 */
static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = {
.dev_id = "ep93xx-spi.0",
.table = {
/* DIO_17 */
GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW),
{ },
},
};
static struct ep93xx_spi_info ts72xx_spi_info __initdata = {
.chipselect = ts72xx_spi_chipselects,
.num_chipselect = ARRAY_SIZE(ts72xx_spi_chipselects),
/* Intentionally left blank */
};
static void __init ts72xx_init_machine(void)
......@@ -339,6 +346,7 @@ static void __init ts72xx_init_machine(void)
if (board_is_ts7300())
platform_device_register(&ts73xx_fpga_device);
#endif
gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table);
ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
ARRAY_SIZE(ts72xx_spi_devices));
}
......@@ -398,6 +406,7 @@ static void __init bk3_init_machine(void)
ep93xx_register_eth(&ts72xx_eth_data, 1);
gpiod_add_lookup_table(&bk3_spi_cs_gpio_table);
ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info,
ARRAY_SIZE(bk3_spi_board_info));
......
......@@ -245,15 +245,17 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
},
};
static int vision_spi_chipselects[] __initdata = {
EP93XX_GPIO_LINE_EGPIO6,
EP93XX_GPIO_LINE_EGPIO7,
EP93XX_GPIO_LINE_G(2),
static struct gpiod_lookup_table vision_spi_cs_gpio_table = {
.dev_id = "ep93xx-spi.0",
.table = {
GPIO_LOOKUP_IDX("A", 6, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("A", 7, "cs", 1, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("G", 2, "cs", 2, GPIO_ACTIVE_LOW),
{ },
},
};
static struct ep93xx_spi_info vision_spi_master __initdata = {
.chipselect = vision_spi_chipselects,
.num_chipselect = ARRAY_SIZE(vision_spi_chipselects),
.use_dma = 1,
};
......@@ -295,6 +297,7 @@ static void __init vision_init_machine(void)
ep93xx_register_i2c(vision_i2c_info,
ARRAY_SIZE(vision_i2c_info));
gpiod_add_lookup_table(&vision_spi_mmc_gpio_table);
gpiod_add_lookup_table(&vision_spi_cs_gpio_table);
ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
ARRAY_SIZE(vision_spi_board_info));
vision_register_i2s();
......
......@@ -28,7 +28,6 @@
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/scatterlist.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/dma-ep93xx.h>
......@@ -676,6 +675,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
if (!master)
return -ENOMEM;
master->use_gpio_descriptors = true;
master->prepare_transfer_hardware = ep93xx_spi_prepare_hardware;
master->unprepare_transfer_hardware = ep93xx_spi_unprepare_hardware;
master->prepare_message = ep93xx_spi_prepare_message;
......@@ -683,31 +683,11 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
master->num_chipselect = info->num_chipselect;
master->cs_gpios = devm_kcalloc(&master->dev,
master->num_chipselect, sizeof(int),
GFP_KERNEL);
if (!master->cs_gpios) {
error = -ENOMEM;
goto fail_release_master;
}
for (i = 0; i < master->num_chipselect; i++) {
master->cs_gpios[i] = info->chipselect[i];
if (!gpio_is_valid(master->cs_gpios[i]))
continue;
error = devm_gpio_request_one(&pdev->dev, master->cs_gpios[i],
GPIOF_OUT_INIT_HIGH,
"ep93xx-spi");
if (error) {
dev_err(&pdev->dev, "could not request cs gpio %d\n",
master->cs_gpios[i]);
goto fail_release_master;
}
}
/*
* The SPI core will count the number of GPIO descriptors to figure
* out the number of chip selects available on the platform.
*/
master->num_chipselect = 0;
platform_set_drvdata(pdev, master);
......
......@@ -6,13 +6,9 @@ struct spi_device;
/**
* struct ep93xx_spi_info - EP93xx specific SPI descriptor
* @chipselect: array of gpio numbers to use as chip selects
* @num_chipselect: ARRAY_SIZE(chipselect)
* @use_dma: use DMA for the transfers
*/
struct ep93xx_spi_info {
int *chipselect;
int num_chipselect;
bool use_dma;
};
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment