Commit 33f835bd authored by Martin Kepplinger's avatar Martin Kepplinger
Browse files

dt-bindings: hi846: updates from revision v4 upstream

upstream reference:
https://lore.kernel.org/linux-media/20210607105213.1211722-3-martin.kepplinger@puri.sm/T/#u
parent 2cadcd3c
......@@ -12,7 +12,7 @@ maintainers:
description: |-
The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
interface and CCI (I2C compatible) control bus. The output format
is 10bit Bayer.
is raw Bayer.
properties:
compatible:
......@@ -25,20 +25,25 @@ properties:
items:
- description: Reference to the mclk clock.
clock-names:
items:
- const: mclk
reset-gpios:
description: Reference to the GPIO connected to the reset pin. Active low.
description: Reference to the GPIO connected to the RESETB pin. Active low.
maxItems: 1
shutdown-gpios:
description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low.
maxItems: 1
vdd-supply:
description: Definition of the regulator used as 1.8V digital power supply.
vddio-supply:
description: Definition of the regulator used for the VDDIO power supply.
vdda-supply:
description: Definition of the regulator used for the VDDA power supply.
vddd-supply:
description: Definition of the regulator used for the VDDD power supply.
port:
$ref: /schemas/graph.yaml#/properties/port
additionalProperties: false
properties:
endpoint:
......@@ -64,9 +69,9 @@ required:
- compatible
- reg
- clocks
- clock-names
- reset-gpios
- vdd-supply
- vddio-supply
- vdda-supply
- vddd-supply
- port
additionalProperties: false
......@@ -83,8 +88,9 @@ examples:
compatible = "hynix,hi846";
reg = <0x20>;
clocks = <&clk>;
clock-names = "mclk";
vdd-supply = <&reg_camera_pwr_en>; /* 1.8v */
vddio-supply = <&reg_camera_pwr_en>;
vdda-supply = <&reg_camera_pwr_en>;
vddd-supply = <&reg_camera_pwr_en>;
reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
port {
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment