Commit 43d3d092 authored by Ulf Hansson's avatar Ulf Hansson Committed by Marcel Holtmann

Bluetooth: hci_ll: Add support for the external clock

Add support to manage the external clock provided to the WiLink combo chip
as it's needed for any of the transport interfaces.

To avoid breaking platforms not yet specifying the external clock, we make
it optional. In case the clock is successfully fetched during ->probe(),
let's manage it via the ->open|close() callbacks, to make sure the device
get properly powered on/off.

Fixes: ea452678 ("arm64: dts: hikey: Fix WiFi support")
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Tested-by: default avatarJohn Stultz <john.stultz@linaro.org>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent 3c8e42a7
......@@ -48,6 +48,7 @@
#include <linux/serdev.h>
#include <linux/skbuff.h>
#include <linux/ti_wilink_st.h>
#include <linux/clk.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
......@@ -84,6 +85,7 @@ struct ll_device {
struct hci_uart hu;
struct serdev_device *serdev;
struct gpio_desc *enable_gpio;
struct clk *ext_clk;
};
struct ll_struct {
......@@ -146,8 +148,12 @@ static int ll_open(struct hci_uart *hu)
hu->priv = ll;
if (hu->serdev)
if (hu->serdev) {
struct ll_device *lldev = serdev_device_get_drvdata(hu->serdev);
serdev_device_open(hu->serdev);
if (!IS_ERR(lldev->ext_clk))
clk_prepare_enable(lldev->ext_clk);
}
return 0;
}
......@@ -181,6 +187,8 @@ static int ll_close(struct hci_uart *hu)
struct ll_device *lldev = serdev_device_get_drvdata(hu->serdev);
gpiod_set_value_cansleep(lldev->enable_gpio, 0);
clk_disable_unprepare(lldev->ext_clk);
serdev_device_close(hu->serdev);
}
......@@ -721,6 +729,10 @@ static int hci_ti_probe(struct serdev_device *serdev)
if (IS_ERR(lldev->enable_gpio))
return PTR_ERR(lldev->enable_gpio);
lldev->ext_clk = devm_clk_get(&serdev->dev, "ext_clock");
if (IS_ERR(lldev->ext_clk) && PTR_ERR(lldev->ext_clk) != -ENOENT)
return PTR_ERR(lldev->ext_clk);
of_property_read_u32(serdev->dev.of_node, "max-speed", &max_speed);
hci_uart_set_speeds(hu, 115200, max_speed);
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment