arm64: dt: fsl: Add mclk0 definitions for sai2/6

Specify all of the mclk's for the sai interfaces.
Signed-off-by: default avatarAngus Ainslie (Purism) <angus@akkea.ca>
parent 445ff9e3
......@@ -432,9 +432,10 @@ sai6: sai@30030000 {
reg = <0x30030000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
<&clk IMX8MQ_CLK_SAI6_ROOT>,
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
<&clk IMX8MQ_CLK_SAI6_IPG>,
<&clk IMX8MQ_CLK_SAI6_ROOT>,
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
dma-names = "rx", "tx";
fsl,shared-interrupt;
......@@ -735,9 +736,10 @@ sai2: sai@308b0000 {
reg = <0x308b0000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
<&clk IMX8MQ_CLK_SAI2_ROOT>,
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
<&clk IMX8MQ_CLK_SAI2_IPG>,
<&clk IMX8MQ_CLK_SAI2_ROOT>,
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
dma-names = "rx", "tx";
status = "disabled";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment