Commit 554b3529 authored by Daniel Lezcano's avatar Daniel Lezcano Committed by Zhang Rui
Browse files

thermal/drivers/core: Remove the module Kconfig's option



The module support for the thermal subsystem makes little sense:
 - some subsystems relying on it are not modules, thus forcing the
   framework to be compiled in
 - it is compiled in for almost every configs, the remaining ones
   are a few platforms where I don't see why we can not switch the thermal
   to 'y'. The drivers can stay in tristate.
 - platforms need the thermal to be ready as soon as possible at boot time
   in order to mitigate

Usually the subsystems framework are compiled-in and the plugs are as
module.

Remove the module option. The removal of the module related dead code will
come after this patch gets in or is acked.
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: default avatarGuenter Roeck <groeck@chromium.org>
For mini2440:
Acked-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS part
Acked-by: default avatarRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: default avatarZhang Rui <rui.zhang@intel.com>
parent dc4060a5
......@@ -152,7 +152,7 @@ CONFIG_SPI_S3C24XX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIO_SYSFS=y
CONFIG_SENSORS_LM75=y
CONFIG_THERMAL=m
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_FB=y
......
......@@ -387,7 +387,7 @@ CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_THERMAL=m
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=m
CONFIG_SA1100_WATCHDOG=m
......
......@@ -228,7 +228,7 @@ CONFIG_SERIAL_IP22_ZILOG=m
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=m
# CONFIG_HWMON is not set
CONFIG_THERMAL=m
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_INDYDOG=m
# CONFIG_VGA_CONSOLE is not set
......
......@@ -271,7 +271,7 @@ CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_STUB=m
# CONFIG_HWMON is not set
CONFIG_THERMAL=m
CONFIG_THERMAL=y
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
......
......@@ -119,7 +119,7 @@ CONFIG_I2C_PUV3=y
# Hardware Monitoring support
#CONFIG_SENSORS_LM75=m
# Generic Thermal sysfs driver
#CONFIG_THERMAL=m
#CONFIG_THERMAL=y
#CONFIG_THERMAL_HWMON=y
# Multimedia support
......
......@@ -3,7 +3,7 @@
#
menuconfig THERMAL
tristate "Generic Thermal sysfs driver"
bool "Generic Thermal sysfs driver"
help
Generic Thermal Sysfs driver offers a generic mechanism for
thermal management. Usually it's made up of one or more thermal
......@@ -11,7 +11,7 @@ menuconfig THERMAL
Each thermal zone contains its own temperature, trip points,
cooling devices.
All platforms with ACPI thermal support can use this driver.
If you want this support, you should say Y or M here.
If you want this support, you should say Y here.
if THERMAL
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment