Commit 84f7c60b authored by Ulf Hansson's avatar Ulf Hansson

arm64: dts: hikey: Add the SYS_5V and the VDD_3V3 regulators

Add these regulators to better describe the HW, but also because those is
needed in following changes.
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Acked-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 1b32a5ff
...@@ -81,7 +81,26 @@ reboot-mode { ...@@ -81,7 +81,26 @@ reboot-mode {
}; };
}; };
reg_5v_hub: regulator@0 { reg_sys_5v: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "SYS_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
reg_vdd_3v3: regulator@1 {
compatible = "regulator-fixed";
regulator-name = "VDD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
vin-supply = <&reg_sys_5v>;
};
reg_5v_hub: regulator@2 {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
regulator-name = "5V_HUB"; regulator-name = "5V_HUB";
regulator-min-microvolt = <5000000>; regulator-min-microvolt = <5000000>;
...@@ -89,6 +108,7 @@ reg_5v_hub: regulator@0 { ...@@ -89,6 +108,7 @@ reg_5v_hub: regulator@0 {
regulator-boot-on; regulator-boot-on;
gpio = <&gpio0 7 0>; gpio = <&gpio0 7 0>;
regulator-always-on; regulator-always-on;
vin-supply = <&reg_sys_5v>;
}; };
soc { soc {
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment