Commit ac84eb47 authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Michal Marek
Browse files

kbuild: remove unnecessary variable initializaions



Clearing obj-y, obj-m, obj-n, obj- in each Makefile is
a useless habit.

They are non-exported variables; therefore they are always empty
whenever descending into each subdirectory.
(Moreorver, obj-y and obj-m are also set to empty at the beginning
of scripts/Makefile.build)
Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: default avatarPeter Foley <pefoley2@pefoley.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarMichal Marek <mmarek@suse.cz>
parent 895ed4e8
......@@ -3,9 +3,6 @@
#
obj-y := irq.o gpio.o setup.o sysirq_mask.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_OLD_CLK_AT91) += clock.o
obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
......
......@@ -5,6 +5,3 @@
# Object file lists.
obj-y := core.o io.o leds.o
obj-m :=
obj-n :=
obj- :=
......@@ -2,9 +2,6 @@
# Makefile for the linux kernel.
#
obj-y := core.o clock.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_EP93XX_DMA) += dma.o
......
......@@ -7,11 +7,6 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Core
obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o
......
......@@ -5,9 +5,6 @@
# Object file lists.
obj-y := common.o dma.o isa-irq.o
obj-m :=
obj-n :=
obj- :=
pci-y += dc21285.o
pci-$(CONFIG_ARCH_CATS) += cats-pci.o
......
obj-y :=
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_ARCH_IOP13XX) += setup.o
obj-$(CONFIG_ARCH_IOP13XX) += irq.o
obj-$(CONFIG_ARCH_IOP13XX) += pci.o
......
......@@ -3,9 +3,6 @@
#
obj-y := irq.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_MACH_GLANTANK) += glantank.o
obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
......
......@@ -3,9 +3,6 @@
#
obj-y := irq.o uart.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_ARCH_IQ80331) += iq80331.o
obj-$(CONFIG_MACH_IQ80332) += iq80332.o
......@@ -4,9 +4,6 @@
#
obj-y := cpu.o irq.o time.o devices.o
obj-m :=
obj-n :=
obj- :=
# PCI support is optional
obj-$(CONFIG_PCI) += pci.o
......
......@@ -5,7 +5,3 @@
# Object file lists.
obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o
obj-m :=
obj-n :=
obj- :=
......@@ -7,11 +7,6 @@
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n :=
obj- :=
# core
obj-y += common.o
......
......@@ -5,11 +5,6 @@
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Core
obj-y += common.o
......
......@@ -7,11 +7,6 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Core
obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
......
......@@ -4,9 +4,6 @@
# Common support
obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
obj-m :=
obj-n :=
obj- :=
# Specific board support
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
......
......@@ -3,9 +3,6 @@
#
obj-y := core.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
obj-$(CONFIG_REGULATOR_AB3100) += regulator.o
......@@ -2,8 +2,6 @@
# Makefile for the linux kernel.
#
obj-y :=
# IOP32X
obj-$(CONFIG_ARCH_IOP32X) += i2c.o
obj-$(CONFIG_ARCH_IOP32X) += pci.o
......@@ -27,7 +25,3 @@ obj-$(CONFIG_ARCH_IOP33X) += restart.o
# IOP13XX
obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
obj-$(CONFIG_ARCH_IOP13XX) += time.o
obj-m :=
obj-n :=
obj- :=
......@@ -6,9 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-omap/include
# Common support
obj-y := sram.o dma.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
# omap_device support (OMAP2+ only at the moment)
......
......@@ -6,10 +6,6 @@
ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
obj-y :=
obj-m :=
obj- :=
# Objects we always build independent of SoC choice
obj-y += init.o cpu.o
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment