Set SD2_VSELECT HIGH
In order to make SDHC2 use a 1.8V logic level SD2_VSELECT used on the dev kit SoM must be set as logic HIGH.
SD2_VSELECT is controlled by GPIO1_IO04.
Due to an influx of spam, we have had to impose restrictions on new accounts. Please see this wiki page for instructions on how to get full permissions. Sorry for the inconvenience.
In order to make SDHC2 use a 1.8V logic level SD2_VSELECT used on the dev kit SoM must be set as logic HIGH.
SD2_VSELECT is controlled by GPIO1_IO04.