Commit 28643104 authored by Roland Stigge's avatar Roland Stigge Committed by Greg Kroah-Hartman

USB: ohci-nxp: Rename symbols from pnx4008 to nxp

Since this driver is compatible with several NXP devices, the driver was renamed
accordingly. This patch also changes the respective symbol names.
Signed-off-by: default avatarRoland Stigge <stigge@antcom.de>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 32abd56a
......@@ -87,11 +87,11 @@ it may have different addresses from one board to the next (manufacturer
changing its design without notice). In this case, you can call
i2c_new_probed_device() instead of i2c_new_device().
Example (from the pnx4008 OHCI driver):
Example (from the nxp OHCI driver):
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
{
(...)
struct i2c_adapter *i2c_adap;
......@@ -100,7 +100,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
(...)
i2c_adap = i2c_get_adapter(2);
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE);
isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
normal_i2c, NULL);
i2c_put_adapter(i2c_adap);
......
......@@ -1052,7 +1052,7 @@ MODULE_LICENSE ("GPL");
#ifdef CONFIG_ARCH_PNX4008
#include "ohci-nxp.c"
#define PLATFORM_DRIVER usb_hcd_pnx4008_driver
#define PLATFORM_DRIVER usb_hcd_nxp_driver
#endif
#ifdef CONFIG_ARCH_DAVINCI_DA8XX
......
/*
* drivers/usb/host/ohci-pnx4008.c
* driver for NXP USB Host devices
*
* driver for Philips PNX4008 USB Host
* Currently supported OHCI host devices:
* - Philips PNX4008
*
* Authors: Dmitry Chigirev <source@mvista.com>
* Vitaly Wool <vitalywool@gmail.com>
......@@ -121,13 +122,13 @@ static int isp1301_remove(struct i2c_client *client)
}
static const struct i2c_device_id isp1301_id[] = {
{ "isp1301_pnx", 0 },
{ "isp1301_nxp", 0 },
{ }
};
static struct i2c_driver isp1301_driver = {
.driver = {
.name = "isp1301_pnx",
.name = "isp1301_nxp",
},
.probe = isp1301_probe,
.remove = isp1301_remove,
......@@ -180,14 +181,14 @@ static inline void isp1301_vbus_off(void)
ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
}
static void pnx4008_start_hc(void)
static void nxp_start_hc(void)
{
unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
__raw_writel(tmp, USB_OTG_STAT_CONTROL);
isp1301_vbus_on();
}
static void pnx4008_stop_hc(void)
static void nxp_stop_hc(void)
{
unsigned long tmp;
isp1301_vbus_off();
......@@ -195,7 +196,7 @@ static void pnx4008_stop_hc(void)
__raw_writel(tmp, USB_OTG_STAT_CONTROL);
}
static int __devinit ohci_pnx4008_start(struct usb_hcd *hcd)
static int __devinit ohci_nxp_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
......@@ -211,9 +212,9 @@ static int __devinit ohci_pnx4008_start(struct usb_hcd *hcd)
return 0;
}
static const struct hc_driver ohci_pnx4008_hc_driver = {
static const struct hc_driver ohci_nxp_hc_driver = {
.description = hcd_name,
.product_desc = "pnx4008 OHCI",
.product_desc = "nxp OHCI",
/*
* generic hardware linkage
......@@ -225,7 +226,7 @@ static const struct hc_driver ohci_pnx4008_hc_driver = {
/*
* basic lifecycle operations
*/
.start = ohci_pnx4008_start,
.start = ohci_nxp_start,
.stop = ohci_stop,
.shutdown = ohci_shutdown,
......@@ -255,7 +256,7 @@ static const struct hc_driver ohci_pnx4008_hc_driver = {
#define USB_CLOCK_MASK (AHB_M_CLOCK_ON| OTG_CLOCK_ON | HOST_CLOCK_ON | I2C_CLOCK_ON)
static void pnx4008_set_usb_bits(void)
static void nxp_set_usb_bits(void)
{
start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
start_int_ack(SE_USB_OTG_ATX_INT_N);
......@@ -282,7 +283,7 @@ static void pnx4008_set_usb_bits(void)
start_int_umask(SE_USB_AHB_NEED_CLK_INT);
}
static void pnx4008_unset_usb_bits(void)
static void nxp_unset_usb_bits(void)
{
start_int_mask(SE_USB_OTG_ATX_INT_N);
start_int_mask(SE_USB_OTG_TIMER_INT);
......@@ -292,17 +293,17 @@ static void pnx4008_unset_usb_bits(void)
start_int_mask(SE_USB_AHB_NEED_CLK_INT);
}
static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd = 0;
struct ohci_hcd *ohci;
const struct hc_driver *driver = &ohci_pnx4008_hc_driver;
const struct hc_driver *driver = &ohci_nxp_hc_driver;
struct i2c_adapter *i2c_adap;
struct i2c_board_info i2c_info;
int ret = 0, irq;
dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (pnx4008)\n", hcd_name);
dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
if (usb_disabled()) {
err("USB is disabled");
ret = -ENODEV;
......@@ -327,7 +328,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
}
i2c_adap = i2c_get_adapter(2);
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE);
isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
normal_i2c, NULL);
i2c_put_adapter(i2c_adap);
......@@ -375,7 +376,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
}
/* Set all USB bits in the Start Enable register */
pnx4008_set_usb_bits();
nxp_set_usb_bits();
hcd->rsrc_start = pdev->resource[0].start;
hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
......@@ -392,7 +393,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
goto out4;
}
pnx4008_start_hc();
nxp_start_hc();
platform_set_drvdata(pdev, hcd);
ohci = hcd_to_ohci(hcd);
ohci_hcd_init(ohci);
......@@ -402,9 +403,9 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
if (ret == 0)
return ret;
pnx4008_stop_hc();
nxp_stop_hc();
out4:
pnx4008_unset_usb_bits();
nxp_unset_usb_bits();
usb_put_hcd(hcd);
out3:
clk_disable(usb_clk);
......@@ -419,15 +420,15 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
return ret;
}
static int usb_hcd_pnx4008_remove(struct platform_device *pdev)
static int usb_hcd_nxp_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_remove_hcd(hcd);
pnx4008_stop_hc();
nxp_stop_hc();
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
pnx4008_unset_usb_bits();
nxp_unset_usb_bits();
clk_disable(usb_clk);
clk_put(usb_clk);
i2c_unregister_device(isp1301_i2c_client);
......@@ -442,12 +443,12 @@ static int usb_hcd_pnx4008_remove(struct platform_device *pdev)
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:usb-ohci");
static struct platform_driver usb_hcd_pnx4008_driver = {
static struct platform_driver usb_hcd_nxp_driver = {
.driver = {
.name = "usb-ohci",
.owner = THIS_MODULE,
},
.probe = usb_hcd_pnx4008_probe,
.remove = usb_hcd_pnx4008_remove,
.probe = usb_hcd_nxp_probe,
.remove = usb_hcd_nxp_remove,
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment