Commit 5812c13a authored by Milo Kim's avatar Milo Kim Committed by Linus Torvalds

backlight: lp855x_bl: support new LP8555 device

LP8555 is one of the LP855x family devices.

This device needs pre_init_device() and post_init_device() driver
structure.  It's same as LP8557, so the device configuration code is
shared with LP8557.  Backlight outputs are generated from dual DC-DC boost
converters.  It's configurable EPROM settings which are defined in the
platform data.

Driver documentation and device tree bindings are updated.
Signed-off-by: default avatarMilo Kim <milo.kim@ti.com>
Signed-off-by: default avatarJingoo Han <jg1.han@samsung.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent b300645a
......@@ -4,7 +4,8 @@ Kernel driver lp855x
Backlight driver for LP855x ICs
Supported chips:
Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
LP8557
Author: Milo(Woogyom) Kim <milo.kim@ti.com>
......@@ -24,7 +25,7 @@ Value : pwm based or register based
2) chip_id
The lp855x chip id.
Value : lp8550/lp8551/lp8552/lp8553/lp8556/lp8557
Value : lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557
Platform data for lp855x
------------------------
......
......@@ -2,7 +2,7 @@ lp855x bindings
Required properties:
- compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553",
"ti,lp8556", "ti,lp8557"
"ti,lp8555", "ti,lp8556", "ti,lp8557"
- reg: I2C slave address (u8)
- dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device.
......@@ -15,6 +15,33 @@ Optional properties:
Example:
/* LP8555 */
backlight@2c {
compatible = "ti,lp8555";
reg = <0x2c>;
dev-ctrl = /bits/ 8 <0x00>;
pwm-period = <10000>;
/* 4V OV, 4 output LED0 string enabled */
rom_14h {
rom-addr = /bits/ 8 <0x14>;
rom-val = /bits/ 8 <0xcf>;
};
/* Heavy smoothing, 24ms ramp time step */
rom_15h {
rom-addr = /bits/ 8 <0x15>;
rom-val = /bits/ 8 <0xc7>;
};
/* 4 output LED1 string enabled */
rom_19h {
rom-addr = /bits/ 8 <0x19>;
rom-val = /bits/ 8 <0x0f>;
};
};
/* LP8556 */
backlight@2c {
compatible = "ti,lp8556";
......
......@@ -388,8 +388,8 @@ config BACKLIGHT_LP855X
tristate "Backlight driver for TI LP855X"
depends on BACKLIGHT_CLASS_DEVICE && I2C
help
This supports TI LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
backlight driver.
This supports TI LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
LP8557 backlight driver.
config BACKLIGHT_LP8788
tristate "Backlight driver for TI LP8788 MFD"
......
......@@ -26,13 +26,15 @@
#define LP8556_EPROM_START 0xA0
#define LP8556_EPROM_END 0xAF
/* LP8557 Registers */
/* LP8555/7 Registers */
#define LP8557_BL_CMD 0x00
#define LP8557_BL_MASK 0x01
#define LP8557_BL_ON 0x01
#define LP8557_BL_OFF 0x00
#define LP8557_BRIGHTNESS_CTRL 0x04
#define LP8557_CONFIG 0x10
#define LP8555_EPROM_START 0x10
#define LP8555_EPROM_END 0x7A
#define LP8557_EPROM_START 0x10
#define LP8557_EPROM_END 0x1E
......@@ -111,6 +113,10 @@ static bool lp855x_is_valid_rom_area(struct lp855x *lp, u8 addr)
start = LP8556_EPROM_START;
end = LP8556_EPROM_END;
break;
case LP8555:
start = LP8555_EPROM_START;
end = LP8555_EPROM_END;
break;
case LP8557:
start = LP8557_EPROM_START;
end = LP8557_EPROM_END;
......@@ -165,9 +171,14 @@ static int lp855x_configure(struct lp855x *lp)
struct lp855x_platform_data *pd = lp->pdata;
switch (lp->chip_id) {
case LP8550 ... LP8556:
case LP8550:
case LP8551:
case LP8552:
case LP8553:
case LP8556:
lp->cfg = &lp855x_dev_cfg;
break;
case LP8555:
case LP8557:
lp->cfg = &lp8557_dev_cfg;
break;
......@@ -470,6 +481,7 @@ static const struct of_device_id lp855x_dt_ids[] = {
{ .compatible = "ti,lp8551", },
{ .compatible = "ti,lp8552", },
{ .compatible = "ti,lp8553", },
{ .compatible = "ti,lp8555", },
{ .compatible = "ti,lp8556", },
{ .compatible = "ti,lp8557", },
{ }
......@@ -481,6 +493,7 @@ static const struct i2c_device_id lp855x_ids[] = {
{"lp8551", LP8551},
{"lp8552", LP8552},
{"lp8553", LP8553},
{"lp8555", LP8555},
{"lp8556", LP8556},
{"lp8557", LP8557},
{ }
......
......@@ -40,6 +40,17 @@
#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG
#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG
/* CONFIG register - LP8555 */
#define LP8555_PWM_STANDBY BIT(7)
#define LP8555_PWM_FILTER BIT(6)
#define LP8555_RELOAD_EPROM BIT(3) /* use it if EPROMs should be reset
when the backlight turns on */
#define LP8555_OFF_OPENLEDS BIT(2)
#define LP8555_PWM_CONFIG LP8555_PWM_ONLY
#define LP8555_I2C_CONFIG LP8555_I2C_ONLY
#define LP8555_COMB1_CONFIG LP8555_COMBINED1
#define LP8555_COMB2_CONFIG LP8555_COMBINED2
/* DEVICE CONTROL register - LP8556 */
#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT)
#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT)
......@@ -65,6 +76,7 @@ enum lp855x_chip_id {
LP8551,
LP8552,
LP8553,
LP8555,
LP8556,
LP8557,
};
......@@ -89,6 +101,13 @@ enum lp8553_brighntess_source {
LP8553_I2C_ONLY = LP8550_I2C_ONLY,
};
enum lp8555_brightness_source {
LP8555_PWM_ONLY,
LP8555_I2C_ONLY,
LP8555_COMBINED1, /* Brightness register with shaped PWM */
LP8555_COMBINED2, /* PWM with shaped brightness register */
};
enum lp8556_brightness_source {
LP8556_PWM_ONLY,
LP8556_COMBINED1, /* pwm + i2c before the shaper block */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment