Commit 99a830f2 authored by Lorenzo Bianconi's avatar Lorenzo Bianconi Committed by Angus Ainslie (Purism)

iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C

UPSTREAM COMMIT:
dbcd2088a718 iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C

Add support to STM LSM6DS3TR-C 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6ds3tr-c.pdfSigned-off-by: default avatarLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 705dc617
......@@ -10,7 +10,7 @@ config IIO_ST_LSM6DSX
help
Say yes here to build support for STMicroelectronics LSM6DSx imu
sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr
ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c
To compile this driver as a module, choose M here: the module
will be called st_lsm6dsx.
......
......@@ -22,6 +22,7 @@
#define ST_ASM330LHH_DEV_NAME "asm330lhh"
#define ST_LSM6DSOX_DEV_NAME "lsm6dsox"
#define ST_LSM6DSR_DEV_NAME "lsm6dsr"
#define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c"
enum st_lsm6dsx_hw_id {
ST_LSM6DS3_ID,
......@@ -33,6 +34,7 @@ enum st_lsm6dsx_hw_id {
ST_ASM330LHH_ID,
ST_LSM6DSOX_ID,
ST_LSM6DSR_ID,
ST_LSM6DS3TRC_ID,
ST_LSM6DSX_MAX_ID,
};
......
......@@ -2,10 +2,10 @@
/*
* STMicroelectronics st_lsm6dsx FIFO buffer library driver
*
* LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC: The FIFO buffer can be
* configured to store data from gyroscope and accelerometer. Samples are
* queued without any tag according to a specific pattern based on
* 'FIFO data sets' (6 bytes each):
* LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C:
* The FIFO buffer can be configured to store data from gyroscope and
* accelerometer. Samples are queued without any tag according to a
* specific pattern based on 'FIFO data sets' (6 bytes each):
* - 1st data set is reserved for gyroscope data
* - 2nd data set is reserved for accelerometer data
* The FIFO pattern changes depending on the ODRs and decimation factors
......
......@@ -18,7 +18,7 @@
* - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
* - FIFO size: 8KB
*
* - LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC:
* - LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C:
* - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416
* - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
* - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
......@@ -233,6 +233,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
}, {
.hw_id = ST_ISM330DLC_ID,
.name = ST_ISM330DLC_DEV_NAME,
}, {
.hw_id = ST_LSM6DS3TRC_ID,
.name = ST_LSM6DS3TRC_DEV_NAME,
},
},
.decimator = {
......
......@@ -75,6 +75,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
.compatible = "st,lsm6dsr",
.data = (void *)ST_LSM6DSR_ID,
},
{
.compatible = "st,lsm6ds3tr-c",
.data = (void *)ST_LSM6DS3TRC_ID,
},
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
......@@ -89,6 +93,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
{ ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
{ ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID },
{ ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
{},
};
MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
......
......@@ -75,6 +75,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
.compatible = "st,lsm6dsr",
.data = (void *)ST_LSM6DSR_ID,
},
{
.compatible = "st,lsm6ds3tr-c",
.data = (void *)ST_LSM6DS3TRC_ID,
},
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
......@@ -89,6 +93,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
{ ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
{ ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID },
{ ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
{},
};
MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment