Commit f0804804 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM changes from Paolo Bonzini:
 "Here are the 3.13 KVM changes.  There was a lot of work on the PPC
  side: the HV and emulation flavors can now coexist in a single kernel
  is probably the most interesting change from a user point of view.

  On the x86 side there are nested virtualization improvements and a few
  bugfixes.

  ARM got transparent huge page support, improved overcommit, and
  support for big endian guests.

  Finally, there is a new interface to connect KVM with VFIO.  This
  helps with devices that use NoSnoop PCI transactions, letting the
  driver in the guest execute WBINVD instructions.  This includes some
  nVidia cards on Windows, that fail to start without these patches and
  the corresponding userspace changes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
  kvm, vmx: Fix lazy FPU on nested guest
  arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu
  arm/arm64: KVM: MMIO support for BE guest
  kvm, cpuid: Fix sparse warning
  kvm: Delete prototype for non-existent function kvm_check_iopl
  kvm: Delete prototype for non-existent function complete_pio
  hung_task: add method to reset detector
  pvclock: detect watchdog reset at pvclock read
  kvm: optimize out smp_mb after srcu_read_unlock
  srcu: API for barrier after srcu read unlock
  KVM: remove vm mmap method
  KVM: IOMMU: hva align mapping page size
  KVM: x86: trace cpuid emulation when called from emulator
  KVM: emulator: cleanup decode_register_operand() a bit
  KVM: emulator: check rex prefix inside decode_register()
  KVM: x86: fix emulation of "movzbl %bpl, %eax"
  kvm_host: typo fix
  KVM: x86: emulate SAHF instruction
  MAINTAINERS: add tree for kvm.git
  Documentation/kvm: add a 00-INDEX file
  ...
parents eda670c6 e504c909
00-INDEX
- this file.
api.txt
- KVM userspace API.
cpuid.txt
- KVM-specific cpuid leaves (x86).
devices/
- KVM_CAP_DEVICE_CTRL userspace API.
hypercalls.txt
- KVM hypercalls.
locking.txt
- notes on KVM locks.
mmu.txt
- the x86 kvm shadow mmu.
msr.txt
- KVM-specific MSRs (x86).
nested-vmx.txt
- notes on nested virtualization for Intel x86 processors.
ppc-pv.txt
- the paravirtualization interface on PowerPC.
review-checklist.txt
- review checklist for KVM patches.
timekeeping.txt
- timekeeping virtualization for x86-based architectures.
......@@ -1122,9 +1122,9 @@ struct kvm_cpuid2 {
struct kvm_cpuid_entry2 entries[0];
};
#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX 1
#define KVM_CPUID_FLAG_STATEFUL_FUNC 2
#define KVM_CPUID_FLAG_STATE_READ_NEXT 4
#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0)
#define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1)
#define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2)
struct kvm_cpuid_entry2 {
__u32 function;
......@@ -1810,6 +1810,50 @@ registers, find a list below:
PPC | KVM_REG_PPC_TLB3PS | 32
PPC | KVM_REG_PPC_EPTCFG | 32
PPC | KVM_REG_PPC_ICP_STATE | 64
PPC | KVM_REG_PPC_TB_OFFSET | 64
PPC | KVM_REG_PPC_SPMC1 | 32
PPC | KVM_REG_PPC_SPMC2 | 32
PPC | KVM_REG_PPC_IAMR | 64
PPC | KVM_REG_PPC_TFHAR | 64
PPC | KVM_REG_PPC_TFIAR | 64
PPC | KVM_REG_PPC_TEXASR | 64
PPC | KVM_REG_PPC_FSCR | 64
PPC | KVM_REG_PPC_PSPB | 32
PPC | KVM_REG_PPC_EBBHR | 64
PPC | KVM_REG_PPC_EBBRR | 64
PPC | KVM_REG_PPC_BESCR | 64
PPC | KVM_REG_PPC_TAR | 64
PPC | KVM_REG_PPC_DPDES | 64
PPC | KVM_REG_PPC_DAWR | 64
PPC | KVM_REG_PPC_DAWRX | 64
PPC | KVM_REG_PPC_CIABR | 64
PPC | KVM_REG_PPC_IC | 64
PPC | KVM_REG_PPC_VTB | 64
PPC | KVM_REG_PPC_CSIGR | 64
PPC | KVM_REG_PPC_TACR | 64
PPC | KVM_REG_PPC_TCSCR | 64
PPC | KVM_REG_PPC_PID | 64
PPC | KVM_REG_PPC_ACOP | 64
PPC | KVM_REG_PPC_VRSAVE | 32
PPC | KVM_REG_PPC_LPCR | 64
PPC | KVM_REG_PPC_PPR | 64
PPC | KVM_REG_PPC_ARCH_COMPAT 32
PPC | KVM_REG_PPC_TM_GPR0 | 64
...
PPC | KVM_REG_PPC_TM_GPR31 | 64
PPC | KVM_REG_PPC_TM_VSR0 | 128
...
PPC | KVM_REG_PPC_TM_VSR63 | 128
PPC | KVM_REG_PPC_TM_CR | 64
PPC | KVM_REG_PPC_TM_LR | 64
PPC | KVM_REG_PPC_TM_CTR | 64
PPC | KVM_REG_PPC_TM_FPSCR | 64
PPC | KVM_REG_PPC_TM_AMR | 64
PPC | KVM_REG_PPC_TM_PPR | 64
PPC | KVM_REG_PPC_TM_VRSAVE | 64
PPC | KVM_REG_PPC_TM_VSCR | 32
PPC | KVM_REG_PPC_TM_DSCR | 64
PPC | KVM_REG_PPC_TM_TAR | 64
ARM registers are mapped using the lower 32 bits. The upper 16 of that
is the register group type, or coprocessor number:
......@@ -2304,7 +2348,31 @@ Possible features:
Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only).
4.83 KVM_GET_REG_LIST
4.83 KVM_ARM_PREFERRED_TARGET
Capability: basic
Architectures: arm, arm64
Type: vm ioctl
Parameters: struct struct kvm_vcpu_init (out)
Returns: 0 on success; -1 on error
Errors:
ENODEV: no preferred target available for the host
This queries KVM for preferred CPU target type which can be emulated
by KVM on underlying host.
The ioctl returns struct kvm_vcpu_init instance containing information
about preferred CPU target type and recommended features for it. The
kvm_vcpu_init->features bitmap returned will have feature bits set if
the preferred target recommends setting these features, but this is
not mandatory.
The information returned by this ioctl can be used to prepare an instance
of struct kvm_vcpu_init for KVM_ARM_VCPU_INIT ioctl which will result in
in VCPU matching underlying host.
4.84 KVM_GET_REG_LIST
Capability: basic
Architectures: arm, arm64
......@@ -2323,8 +2391,7 @@ struct kvm_reg_list {
This ioctl returns the guest registers that are supported for the
KVM_GET_ONE_REG/KVM_SET_ONE_REG calls.
4.84 KVM_ARM_SET_DEVICE_ADDR
4.85 KVM_ARM_SET_DEVICE_ADDR
Capability: KVM_CAP_ARM_SET_DEVICE_ADDR
Architectures: arm, arm64
......@@ -2362,7 +2429,7 @@ must be called after calling KVM_CREATE_IRQCHIP, but before calling
KVM_RUN on any of the VCPUs. Calling this ioctl twice for any of the
base addresses will return -EEXIST.
4.85 KVM_PPC_RTAS_DEFINE_TOKEN
4.86 KVM_PPC_RTAS_DEFINE_TOKEN
Capability: KVM_CAP_PPC_RTAS
Architectures: ppc
......@@ -2661,6 +2728,77 @@ and usually define the validity of a groups of registers. (e.g. one bit
};
4.81 KVM_GET_EMULATED_CPUID
Capability: KVM_CAP_EXT_EMUL_CPUID
Architectures: x86
Type: system ioctl
Parameters: struct kvm_cpuid2 (in/out)
Returns: 0 on success, -1 on error
struct kvm_cpuid2 {
__u32 nent;
__u32 flags;
struct kvm_cpuid_entry2 entries[0];
};
The member 'flags' is used for passing flags from userspace.
#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0)
#define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1)
#define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2)
struct kvm_cpuid_entry2 {
__u32 function;
__u32 index;
__u32 flags;
__u32 eax;
__u32 ebx;
__u32 ecx;
__u32 edx;
__u32 padding[3];
};
This ioctl returns x86 cpuid features which are emulated by
kvm.Userspace can use the information returned by this ioctl to query
which features are emulated by kvm instead of being present natively.
Userspace invokes KVM_GET_EMULATED_CPUID by passing a kvm_cpuid2
structure with the 'nent' field indicating the number of entries in
the variable-size array 'entries'. If the number of entries is too low
to describe the cpu capabilities, an error (E2BIG) is returned. If the
number is too high, the 'nent' field is adjusted and an error (ENOMEM)
is returned. If the number is just right, the 'nent' field is adjusted
to the number of valid entries in the 'entries' array, which is then
filled.
The entries returned are the set CPUID bits of the respective features
which kvm emulates, as returned by the CPUID instruction, with unknown
or unsupported feature bits cleared.
Features like x2apic, for example, may not be present in the host cpu
but are exposed by kvm in KVM_GET_SUPPORTED_CPUID because they can be
emulated efficiently and thus not included here.
The fields in each entry are defined as follows:
function: the eax value used to obtain the entry
index: the ecx value used to obtain the entry (for entries that are
affected by ecx)
flags: an OR of zero or more of the following:
KVM_CPUID_FLAG_SIGNIFCANT_INDEX:
if the index field is valid
KVM_CPUID_FLAG_STATEFUL_FUNC:
if cpuid for this function returns different values for successive
invocations; there will be several entries with the same function,
all with this flag set
KVM_CPUID_FLAG_STATE_READ_NEXT:
for KVM_CPUID_FLAG_STATEFUL_FUNC entries, set if this entry is
the first entry to be read by a cpu
eax, ebx, ecx, edx: the values returned by the cpuid instruction for
this function/index combination
6. Capabilities that can be enabled
-----------------------------------
......
......@@ -43,6 +43,13 @@ KVM_FEATURE_CLOCKSOURCE2 || 3 || kvmclock available at msrs
KVM_FEATURE_ASYNC_PF || 4 || async pf can be enabled by
|| || writing to msr 0x4b564d02
------------------------------------------------------------------------------
KVM_FEATURE_STEAL_TIME || 5 || steal time can be enabled by
|| || writing to msr 0x4b564d03.
------------------------------------------------------------------------------
KVM_FEATURE_PV_EOI || 6 || paravirtualized end of interrupt
|| || handler can be enabled by writing
|| || to msr 0x4b564d04.
------------------------------------------------------------------------------
KVM_FEATURE_PV_UNHALT || 7 || guest checks this feature bit
|| || before enabling paravirtualized
|| || spinlock support.
......
VFIO virtual device
===================
Device types supported:
KVM_DEV_TYPE_VFIO
Only one VFIO instance may be created per VM. The created device
tracks VFIO groups in use by the VM and features of those groups
important to the correctness and acceleration of the VM. As groups
are enabled and disabled for use by the VM, KVM should be updated
about their presence. When registered with KVM, a reference to the
VFIO-group is held by KVM.
Groups:
KVM_DEV_VFIO_GROUP
KVM_DEV_VFIO_GROUP attributes:
KVM_DEV_VFIO_GROUP_ADD: Add a VFIO group to VFIO-KVM device tracking
KVM_DEV_VFIO_GROUP_DEL: Remove a VFIO group from VFIO-KVM device tracking
For each, kvm_device_attr.addr points to an int32_t file descriptor
for the VFIO group.
......@@ -132,10 +132,14 @@ See the comments in spte_has_volatile_bits() and mmu_spte_update().
------------
Name: kvm_lock
Type: raw_spinlock
Type: spinlock_t
Arch: any
Protects: - vm_list
- hardware virtualization enable/disable
Name: kvm_count_lock
Type: raw_spinlock_t
Arch: any
Protects: - hardware virtualization enable/disable
Comment: 'raw' because hardware enabling/disabling must be atomic /wrt
migration.
......@@ -151,3 +155,14 @@ Type: spinlock_t
Arch: any
Protects: -shadow page/shadow tlb entry
Comment: it is a spinlock since it is used in mmu notifier.
Name: kvm->srcu
Type: srcu lock
Arch: any
Protects: - kvm->memslots
- kvm->buses
Comment: The srcu read lock must be held while accessing memslots (e.g.
when using gfn_to_* functions) and while accessing in-kernel
MMIO/PIO address->device structure mapping (kvm->buses).
The srcu index can be stored in kvm_vcpu->srcu_idx per vcpu
if it is needed by multiple functions.
......@@ -4871,7 +4871,8 @@ KERNEL VIRTUAL MACHINE (KVM)
M: Gleb Natapov <gleb@redhat.com>
M: Paolo Bonzini <pbonzini@redhat.com>
L: kvm@vger.kernel.org
W: http://linux-kvm.org
W: http://www.linux-kvm.org
T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
S: Supported
F: Documentation/*/kvm*.txt
F: Documentation/virtual/kvm/
......
......@@ -57,6 +57,7 @@
* TSC: Trap SMC
* TSW: Trap cache operations by set/way
* TWI: Trap WFI
* TWE: Trap WFE
* TIDCP: Trap L2CTLR/L2ECTLR
* BSU_IS: Upgrade barriers to the inner shareable domain
* FB: Force broadcast of all maintainance operations
......@@ -67,7 +68,7 @@
*/
#define HCR_GUEST_MASK (HCR_TSC | HCR_TSW | HCR_TWI | HCR_VM | HCR_BSU_IS | \
HCR_FB | HCR_TAC | HCR_AMO | HCR_IMO | HCR_FMO | \
HCR_SWIO | HCR_TIDCP)
HCR_TWE | HCR_SWIO | HCR_TIDCP)
#define HCR_VIRT_EXCP_MASK (HCR_VA | HCR_VI | HCR_VF)
/* System Control Register (SCTLR) bits */
......@@ -95,12 +96,12 @@
#define TTBCR_IRGN1 (3 << 24)
#define TTBCR_EPD1 (1 << 23)
#define TTBCR_A1 (1 << 22)
#define TTBCR_T1SZ (3 << 16)
#define TTBCR_T1SZ (7 << 16)
#define TTBCR_SH0 (3 << 12)
#define TTBCR_ORGN0 (3 << 10)
#define TTBCR_IRGN0 (3 << 8)
#define TTBCR_EPD0 (1 << 7)
#define TTBCR_T0SZ 3
#define TTBCR_T0SZ (7 << 0)
#define HTCR_MASK (TTBCR_T0SZ | TTBCR_IRGN0 | TTBCR_ORGN0 | TTBCR_SH0)
/* Hyp System Trap Register */
......@@ -208,6 +209,8 @@
#define HSR_EC_DABT (0x24)
#define HSR_EC_DABT_HYP (0x25)
#define HSR_WFI_IS_WFE (1U << 0)
#define HSR_HVC_IMM_MASK ((1UL << 16) - 1)
#define HSR_DABT_S1PTW (1U << 7)
......
......@@ -39,7 +39,7 @@
#define c6_IFAR 17 /* Instruction Fault Address Register */
#define c7_PAR 18 /* Physical Address Register */
#define c7_PAR_high 19 /* PAR top 32 bits */
#define c9_L2CTLR 20 /* Cortex A15 L2 Control Register */
#define c9_L2CTLR 20 /* Cortex A15/A7 L2 Control Register */
#define c10_PRRR 21 /* Primary Region Remap Register */
#define c10_NMRR 22 /* Normal Memory Remap Register */
#define c12_VBAR 23 /* Vector Base Address Register */
......
......@@ -157,4 +157,55 @@ static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu)
return kvm_vcpu_get_hsr(vcpu) & HSR_HVC_IMM_MASK;
}
static inline unsigned long kvm_vcpu_get_mpidr(struct kvm_vcpu *vcpu)
{
return vcpu->arch.cp15[c0_MPIDR];
}
static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
{
*vcpu_cpsr(vcpu) |= PSR_E_BIT;
}
static inline bool kvm_vcpu_is_be(struct kvm_vcpu *vcpu)
{
return !!(*vcpu_cpsr(vcpu) & PSR_E_BIT);
}
static inline unsigned long vcpu_data_guest_to_host(struct kvm_vcpu *vcpu,
unsigned long data,
unsigned int len)
{
if (kvm_vcpu_is_be(vcpu)) {
switch (len) {
case 1:
return data & 0xff;
case 2:
return be16_to_cpu(data & 0xffff);
default:
return be32_to_cpu(data);
}
}
return data; /* Leave LE untouched */
}
static inline unsigned long vcpu_data_host_to_guest(struct kvm_vcpu *vcpu,
unsigned long data,
unsigned int len)
{
if (kvm_vcpu_is_be(vcpu)) {
switch (len) {
case 1:
return data & 0xff;
case 2:
return cpu_to_be16(data & 0xffff);
default:
return cpu_to_be32(data);
}
}
return data; /* Leave LE untouched */
}
#endif /* __ARM_KVM_EMULATE_H__ */
......@@ -38,11 +38,6 @@
#define KVM_VCPU_MAX_FEATURES 1
/* We don't currently support large pages. */
#define KVM_HPAGE_GFN_SHIFT(x) 0
#define KVM_NR_PAGE_SIZES 1
#define KVM_PAGES_PER_HPAGE(x) (1UL<<31)
#include <kvm/arm_vgic.h>
struct kvm_vcpu;
......@@ -154,6 +149,7 @@ struct kvm_vcpu_stat {
struct kvm_vcpu_init;
int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
const struct kvm_vcpu_init *init);
int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init);
unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu);
int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices);
struct kvm_one_reg;
......
......@@ -62,6 +62,12 @@ phys_addr_t kvm_get_idmap_vector(void);
int kvm_mmu_init(void);
void kvm_clear_hyp_idmap(void);
static inline void kvm_set_pmd(pmd_t *pmd, pmd_t new_pmd)
{
*pmd = new_pmd;
flush_pmd_entry(pmd);
}
static inline void kvm_set_pte(pte_t *pte, pte_t new_pte)
{
*pte = new_pte;
......@@ -103,9 +109,15 @@ static inline void kvm_set_s2pte_writable(pte_t *pte)
pte_val(*pte) |= L_PTE_S2_RDWR;
}
static inline void kvm_set_s2pmd_writable(pmd_t *pmd)
{
pmd_val(*pmd) |= L_PMD_S2_RDWR;
}
struct kvm;
static inline void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn)
static inline void coherent_icache_guest_page(struct kvm *kvm, hva_t hva,
unsigned long size)
{
/*
* If we are going to insert an instruction page and the icache is
......@@ -120,8 +132,7 @@ static inline void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn)
* need any kind of flushing (DDI 0406C.b - Page B3-1392).
*/
if (icache_is_pipt()) {
unsigned long hva = gfn_to_hva(kvm, gfn);
__cpuc_coherent_user_range(hva, hva + PAGE_SIZE);
__cpuc_coherent_user_range(hva, hva + size);
} else if (!icache_is_vivt_asid_tagged()) {
/* any kind of VIPT cache */
__flush_icache_all();
......
......@@ -126,6 +126,8 @@
#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */
#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */
#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */
/*
* Hyp-mode PL2 PTE definitions for LPAE.
*/
......
......@@ -63,7 +63,8 @@ struct kvm_regs {
/* Supported Processor Types */
#define KVM_ARM_TARGET_CORTEX_A15 0
#define KVM_ARM_NUM_TARGETS 1
#define KVM_ARM_TARGET_CORTEX_A7 1
#define KVM_ARM_NUM_TARGETS 2
/* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */
#define KVM_ARM_DEVICE_TYPE_SHIFT 0
......
......@@ -20,6 +20,7 @@ config KVM
bool "Kernel-based Virtual Machine (KVM) support"
select PREEMPT_NOTIFIERS
select ANON_INODES
select HAVE_KVM_CPU_RELAX_INTERCEPT
select KVM_MMIO
select KVM_ARM_HOST
depends on ARM_VIRT_EXT && ARM_LPAE
......
......@@ -19,6 +19,6 @@ kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o
obj-y += kvm-arm.o init.o interrupts.o
obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o
obj-y += coproc.o coproc_a15.o mmio.o psci.o perf.o
obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o
obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic.o
obj-$(CONFIG_KVM_ARM_TIMER) += $(KVM)/arm/arch_timer.o
......@@ -152,12 +152,13 @@ int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf)
return VM_FAULT_SIGBUS;
}
void kvm_arch_free_memslot(struct kvm_memory_slot *free,
void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free,
struct kvm_memory_slot *dont)
{
}
int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages)
int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
unsigned long npages)
{
return 0;
}
......@@ -797,6 +798,19 @@ long kvm_arch_vm_ioctl(struct file *filp,
return -EFAULT;
return kvm_vm_ioctl_set_device_addr(kvm, &dev_addr);
}
case KVM_ARM_PREFERRED_TARGET: {
int err;
struct kvm_vcpu_init init;
err = kvm_vcpu_preferred_target(&init);
if (err)
return err;
if (copy_to_user(argp, &init, sizeof(init)))
return -EFAULT;
return 0;
}
default:
return -EINVAL;
}
......
......@@ -71,6 +71,98 @@ int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run)
return 1;
}
static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
{
/*
* Compute guest MPIDR. We build a virtual cluster out of the
* vcpu_id, but we read the 'U' bit from the underlying
* hardware directly.
*/
vcpu->arch.cp15[c0_MPIDR] = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) |
((vcpu->vcpu_id >> 2) << MPIDR_LEVEL_BITS) |
(vcpu->vcpu_id & 3));
}
/* TRM entries A7:4.3.31 A15:4.3.28 - RO WI */
static bool access_actlr(struct kvm_vcpu *vcpu,
const struct coproc_params *p,
const struct coproc_reg *r)
{
if (p->is_write)
return ignore_write(vcpu, p);
*vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c1_ACTLR];
return true;
}
/* TRM entries A7:4.3.56, A15:4.3.60 - R/O. */
static bool access_cbar(struct kvm_vcpu *vcpu,
const struct coproc_params *p,
const struct coproc_reg *r)
{
if (p->is_write)
return write_to_read_only(vcpu, p);
return read_zero(vcpu, p);
}
/* TRM entries A7:4.3.49, A15:4.3.48 - R/O WI */
static bool access_l2ctlr(struct kvm_vcpu *vcpu,
const struct coproc_params *p,
const struct coproc_reg *r)
{
if (p->is_write)
return ignore_write(vcpu, p);
*vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c9_L2CTLR];
return true;
}
static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
{
u32 l2ctlr, ncores;
asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
l2ctlr &= ~(3 << 24);
ncores = atomic_read(&vcpu->kvm->online_vcpus) - 1;
/* How many cores in the current cluster and the next ones */
ncores -= (vcpu->vcpu_id & ~3);
/* Cap it to the maximum number of cores in a single cluster */
ncores = min(ncores, 3U);
l2ctlr |= (ncores & 3) << 24;
vcpu->arch.cp15[c9_L2CTLR] = l2ctlr;
}
static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
{
u32 actlr;
/* ACTLR contains SMP bit: make sure you create all cpus first! */
asm volatile("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
/* Make the SMP bit consistent with the guest configuration */
if (atomic_read(&vcpu->kvm->online_vcpus) > 1)
actlr |= 1U << 6;
else
actlr &= ~(1U << 6);
vcpu->arch.cp15[c1_ACTLR] = actlr;
}
/*
* TRM entries: A7:4.3.50, A15:4.3.49
* R/O WI (even if NSACR.NS_L2ERR, a write of 1 is ignored).
*/
static bool access_l2ectlr(struct kvm_vcpu *vcpu,
const struct coproc_params *p,
const struct coproc_reg *r)
{
if (p->is_write)
return ignore_write(vcpu, p);
*vcpu_reg(vcpu, p->Rt1) = 0;
return true;
}
/* See note at ARM ARM B1.14.4 */
static bool access_dcsw(struct kvm_vcpu *vcpu,
const struct coproc_params *p,
......@@ -153,10 +245,22 @@ static bool pm_fake(struct kvm_vcpu *vcpu,
* registers preceding 32-bit ones.
*/
static const struct coproc_reg cp15_regs[] = {
/* MPIDR: we use VMPIDR for guest access. */
{ CRn( 0), CRm( 0), Op1( 0), Op2( 5), is32,
NULL, reset_mpidr, c0_MPIDR },
/* CSSELR: swapped by interrupt.S. */
{ CRn( 0), CRm( 0), Op1( 2), Op2( 0), is32,
NULL, reset_unknown, c0_CSSELR },
/* ACTLR: trapped by HCR.TAC bit. */
{ CRn( 1), CRm( 0), Op1( 0), Op2( 1), is32,
access_actlr, reset_actlr, c1_ACTLR },
/* CPACR: swapped by interrupt.S. */
{ CRn( 1), CRm( 0), Op1( 0), Op2( 2), is32,
NULL, reset_val, c1_CPACR, 0x00000000 },
/* TTBR0/TTBR1: swapped by interrupt.S. */
{ CRm64( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 },
{ CRm64( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 },
......@@ -194,6 +298,13 @@ static const struct coproc_reg cp15_regs[] = {
{ CRn( 7), CRm( 6), Op1( 0), Op2( 2), is32, access_dcsw},
{ CRn( 7), CRm(10), Op1( 0), Op2( 2), is32, access_dcsw},
{ CRn( 7), CRm(14), Op1( 0), Op2( 2), is32, access_dcsw},
/*
* L2CTLR access (guest wants to know #CPUs).
*/
{ CRn( 9), CRm( 0), Op1( 1), Op2( 2), is32,
access_l2ctlr, reset_l2ctlr, c9_L2CTLR },
{ CRn( 9), CRm( 0), Op1( 1), Op2( 3), is32, access_l2ectlr},
/*
* Dummy performance monitor implementation.
*/
......@@ -234,6 +345,9 @@ static const struct coproc_reg cp15_regs[] = {
/* CNTKCTL: swapped by interrupt.S. */
{ CRn(14), CRm( 1), Op1( 0), Op2( 0), is32,
NULL, reset_val, c14_CNTKCTL, 0x00000000 },
/* The Configuration Base Address Register. */
{ CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar},
};
/* Target specific emulation tables */
......@@ -241,6 +355,12 @@ static struct kvm_coproc_target_table *target_tables[KVM_ARM_NUM_TARGETS];
void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table)
{
unsigned int i;
for (i = 1; i < table->num; i++)
BUG_ON(cmp_reg(&table->table[i-1],
&table->table[i]) >= 0);