1. 30 May, 2019 1 commit
  2. 18 Feb, 2019 1 commit
  3. 20 Mar, 2018 1 commit
  4. 16 Jul, 2017 1 commit
  5. 08 Apr, 2016 2 commits
  6. 27 May, 2015 1 commit
  7. 19 Dec, 2014 1 commit
  8. 07 Apr, 2014 1 commit
    • Viresh Kumar's avatar
      cpufreq: create another field .flags in cpufreq_frequency_table · 7f4b0461
      Viresh Kumar authored
      Currently cpufreq frequency table has two fields: frequency and driver_data.
      driver_data is only for drivers' internal use and cpufreq core shouldn't use
      it at all. But with the introduction of BOOST frequencies, this assumption
      was broken and we started using it as a flag instead.
      
      There are two problems due to this:
      - It is against the description of this field, as driver's data is used by
        the core now.
      - if drivers fill it with -3 for any frequency, then those frequencies are
        never considered by cpufreq core as it is exactly same as value of
        CPUFREQ_BOOST_FREQ, i.e. ~2.
      
      The best way to get this fixed is by creating another field flags which
      will be used for such flags. This patch does that. Along with that various
      drivers need modifications due to the change of struct cpufreq_frequency_table.
      Reviewed-by: default avatarGautham R Shenoy <ego@linux.vnet.ibm.com>
      Signed-off-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
      Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
      7f4b0461
  9. 12 Mar, 2014 1 commit
  10. 30 Oct, 2013 1 commit
  11. 25 Oct, 2013 1 commit
    • Viresh Kumar's avatar
      cpufreq: Implement light weight ->target_index() routine · 9c0ebcf7
      Viresh Kumar authored
      Currently, the prototype of cpufreq_drivers target routines is:
      
      int target(struct cpufreq_policy *policy, unsigned int target_freq,
      		unsigned int relation);
      
      And most of the drivers call cpufreq_frequency_table_target() to get a valid
      index of their frequency table which is closest to the target_freq. And they
      don't use target_freq and relation after that.
      
      So, it makes sense to just do this work in cpufreq core before calling
      cpufreq_frequency_table_target() and simply pass index instead. But this can be
      done only with drivers which expose their frequency table with cpufreq core. For
      others we need to stick with the old prototype of target() until those drivers
      are converted to expose frequency tables.
      
      This patch implements the new light weight prototype for target_index() routine.
      It looks like this:
      
      int target_index(struct cpufreq_policy *policy, unsigned int index);
      
      CPUFreq core will call cpufreq_frequency_table_target() before calling this
      routine and pass index to it. Because CPUFreq core now requires to call routines
      present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time.
      
      This also marks target() interface as deprecated. So, that new drivers avoid
      using it. And Documentation is updated accordingly.
      
      It also converts existing .target() to newly defined light weight
      .target_index() routine for many driver.
      Acked-by: default avatarHans-Christian Egtvedt <egtvedt@samfundet.no>
      Acked-by: default avatarJesper Nilsson <jesper.nilsson@axis.com>
      Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Acked-by: default avatarRussell King <linux@arm.linux.org.uk>
      Acked-by: default avatarDavid S. Miller <davem@davemloft.net>
      Tested-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
      Signed-off-by: default avatarRafael J. Wysocki <rjw@rjwysocki.net>
      9c0ebcf7
  12. 15 Oct, 2013 2 commits
  13. 30 Sep, 2013 1 commit
  14. 10 Aug, 2013 1 commit
  15. 02 Apr, 2013 1 commit
  16. 20 Jul, 2012 1 commit
  17. 27 Jan, 2012 1 commit
    • Andi Kleen's avatar
      cpufreq: Add support for x86 cpuinfo auto loading v4 · fa8031ae
      Andi Kleen authored
      This marks all the x86 cpuinfo tables to the CPU specific device drivers,
      to allow auto loading by udev. This should simplify the distribution
      startup scripts for this greatly.
      
      I didn't add MODULE_DEVICE_IDs to the centrino and p4-clockmod drivers,
      because those probably shouldn't be auto loaded and the acpi driver
      be used instead (not fully sure on that, would appreciate feedback)
      
      The old nforce drivers autoload based on the PCI ID.
      
      ACPI cpufreq is autoloaded in another patch.
      
      v3: Autoload gx based on PCI IDs only. Remove cpu check (Dave Jones)
      v4: Use newly introduce HW_PSTATE feature for powernow-k8 loading
      
      Cc: Dave Jones <davej@redhat.com>
      Cc: Kay Sievers <kay.sievers@vrfy.org>
      Signed-off-by: default avatarAndi Kleen <ak@linux.intel.com>
      Signed-off-by: default avatarThomas Renninger <trenn@suse.de>
      Acked-by: default avatarH. Peter Anvin <hpa@zytor.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      fa8031ae
  18. 19 May, 2011 1 commit
  19. 04 May, 2011 1 commit
    • Dominik Brodowski's avatar
      [CPUFREQ] use dynamic debug instead of custom infrastructure · 2d06d8c4
      Dominik Brodowski authored
      With dynamic debug having gained the capability to report debug messages
      also during the boot process, it offers a far superior interface for
      debug messages than the custom cpufreq infrastructure. As a first step,
      remove the old cpufreq_debug_printk() function and replace it with a call
      to the generic pr_debug() function.
      
      How can dynamic debug be used on cpufreq? You need a kernel which has
      CONFIG_DYNAMIC_DEBUG enabled.
      
      To enabled debugging during runtime, mount debugfs and
      
      $ echo -n 'module cpufreq +p' > /sys/kernel/debug/dynamic_debug/control
      
      for debugging the complete "cpufreq" module. To achieve the same goal during
      boot, append
      
      	ddebug_query="module cpufreq +p"
      
      as a boot parameter to the kernel of your choice.
      
      For more detailled instructions, please see
      Documentation/dynamic-debug-howto.txt
      Signed-off-by: default avatarDominik Brodowski <linux@dominikbrodowski.net>
      Signed-off-by: default avatarDave Jones <davej@redhat.com>
      2d06d8c4
  20. 30 Mar, 2010 1 commit
    • Tejun Heo's avatar
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      Tejun Heo authored
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
      
      percpu.h is included by sched.h and module.h and thus ends up being
      included when building most .c files.  percpu.h includes slab.h which
      in turn includes gfp.h making everything defined by the two files
      universally available and complicating inclusion dependencies.
      
      percpu.h -> slab.h dependency is about to be removed.  Prepare for
      this change by updating users of gfp and slab facilities include those
      headers directly instead of assuming availability.  As this conversion
      needs to touch large number of source files, the following script is
      used as the basis of conversion.
      
        http://userweb.kernel.org/~tj/misc/slabh-sweep.py
      
      The script does the followings.
      
      * Scan files for gfp and slab usages and update includes such that
        only the necessary includes are there.  ie. if only gfp is used,
        gfp.h, if slab is used, slab.h.
      
      * When the script inserts a new include, it looks at the include
        blocks and try to put the new include such that its order conforms
        to its surrounding.  It's put in the include block which contains
        core kernel includes, in the same order that the rest are ordered -
        alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
        doesn't seem to be any matching order.
      
      * If the script can't find a place to put a new include (mostly
        because the file doesn't have fitting include block), it prints out
        an error message indicating which .h file needs to be added to the
        file.
      
      The conversion was done in the following steps.
      
      1. The initial automatic conversion of all .c files updated slightly
         over 4000 files, deleting around 700 includes and adding ~480 gfp.h
         and ~3000 slab.h inclusions.  The script emitted errors for ~400
         files.
      
      2. Each error was manually checked.  Some didn't need the inclusion,
         some needed manual addition while adding it to implementation .h or
         embedding .c file was more appropriate for others.  This step added
         inclusions to around 150 files.
      
      3. The script was run again and the output was compared to the edits
         from #2 to make sure no file was left behind.
      
      4. Several build tests were done and a couple of problems were fixed.
         e.g. lib/decompress_*.c used malloc/free() wrappers around slab
         APIs requiring slab.h to be added manually.
      
      5. The script was run on all .h files but without automatically
         editing them as sprinkling gfp.h and slab.h inclusions around .h
         files could easily lead to inclusion dependency hell.  Most gfp.h
         inclusion directives were ignored as stuff from gfp.h was usually
         wildly available and often used in preprocessor macros.  Each
         slab.h inclusion directive was examined and added manually as
         necessary.
      
      6. percpu.h was updated not to include slab.h.
      
      7. Build test were done on the following configurations and failures
         were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
         distributed build env didn't work with gcov compiles) and a few
         more options had to be turned off depending on archs to make things
         build (like ipr on powerpc/64 which failed due to missing writeq).
      
         * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
         * powerpc and powerpc64 SMP allmodconfig
         * sparc and sparc64 SMP allmodconfig
         * ia64 SMP allmodconfig
         * s390 SMP allmodconfig
         * alpha SMP allmodconfig
         * um on x86_64 SMP allmodconfig
      
      8. percpu.h modifications were reverted so that it could be applied as
         a separate patch and serve as bisection point.
      
      Given the fact that I had only a couple of failures from tests on step
      6, I'm fairly confident about the coverage of this conversion patch.
      If there is a breakage, it's likely to be something in one of the arch
      headers which should be easily discoverable easily on most builds of
      the specific arch.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Guess-its-ok-by: default avatarChristoph Lameter <cl@linux-foundation.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
  21. 24 Nov, 2009 1 commit
  22. 18 Nov, 2009 1 commit
  23. 15 Jun, 2009 1 commit
  24. 13 Mar, 2009 1 commit
  25. 25 Feb, 2009 1 commit
  26. 06 Jan, 2009 1 commit
  27. 20 Oct, 2008 1 commit
  28. 26 Jul, 2008 1 commit
  29. 18 Jul, 2008 1 commit
    • Mike Travis's avatar
      cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr · 65c01184
      Mike Travis authored
        * This patch replaces the dangerous lvalue version of cpumask_of_cpu
          with new cpumask_of_cpu_ptr macros.  These are patterned after the
          node_to_cpumask_ptr macros.
      
          In general terms, if there is a cpumask_of_cpu_map[] then a pointer to
          the cpumask_of_cpu_map[cpu] entry is used.  The cpumask_of_cpu_map
          is provided when there is a large NR_CPUS count, reducing
          greatly the amount of code generated and stack space used for
          cpumask_of_cpu().  The pointer to the cpumask_t value is needed for
          calling set_cpus_allowed_ptr() to reduce the amount of stack space
          needed to pass the cpumask_t value.
      
          If there isn't a cpumask_of_cpu_map[], then a temporary variable is
          declared and filled in with value from cpumask_of_cpu(cpu) as well as
          a pointer variable pointing to this temporary variable.  Afterwards,
          the pointer is used to reference the cpumask value.  The compiler
          will optimize out the extra dereference through the pointer as well
          as the stack space used for the pointer, resulting in identical code.
      
          A good example of the orthogonal usages is in net/sunrpc/svc.c:
      
      	case SVC_POOL_PERCPU:
      	{
      		unsigned int cpu = m->pool_to[pidx];
      		cpumask_of_cpu_ptr(cpumask, cpu);
      
      		*oldmask = current->cpus_allowed;
      		set_cpus_allowed_ptr(current, cpumask);
      		return 1;
      	}
      	case SVC_POOL_PERNODE:
      	{
      		unsigned int node = m->pool_to[pidx];
      		node_to_cpumask_ptr(nodecpumask, node);
      
      		*oldmask = current->cpus_allowed;
      		set_cpus_allowed_ptr(current, nodecpumask);
      		return 1;
      	}
      Signed-off-by: default avatarMike Travis <travis@sgi.com>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      65c01184
  30. 23 May, 2008 1 commit
  31. 19 Apr, 2008 1 commit
    • Mike Travis's avatar
      x86: use new set_cpus_allowed_ptr function · fc0e4748
      Mike Travis authored
        * Use new set_cpus_allowed_ptr() function added by previous patch,
          which instead of passing the "newly allowed cpus" cpumask_t arg
          by value,  pass it by pointer:
      
          -int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
          +int set_cpus_allowed_ptr(struct task_struct *p, const cpumask_t *new_mask)
      
        * Cleanup uses of CPU_MASK_ALL.
      
        * Collapse other NR_CPUS changes to arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
          Use pointers to cpumask_t arguments whenever possible.
      
      Depends on:
      	[sched-devel]: sched: add new set_cpus_allowed_ptr function
      
      Cc: Len Brown <len.brown@intel.com>
      Cc: Dave Jones <davej@codemonkey.org.uk>
      Signed-off-by: default avatarMike Travis <travis@sgi.com>
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      fc0e4748
  32. 16 Oct, 2007 1 commit
  33. 11 Oct, 2007 1 commit
  34. 04 Oct, 2007 1 commit
  35. 11 Jul, 2007 1 commit
    • Auke Kok's avatar
      PCI: Change all drivers to use pci_device->revision · 44c10138
      Auke Kok authored
      Instead of all drivers reading pci config space to get the revision
      ID, they can now use the pci_device->revision member.
      
      This exposes some issues where drivers where reading a word or a dword
      for the revision number, and adding useless error-handling around the
      read. Some drivers even just read it for no purpose of all.
      
      In devices where the revision ID is being copied over and used in what
      appears to be the equivalent of hotpath, I have left the copy code
      and the cached copy as not to influence the driver's performance.
      
      Compile tested with make all{yes,mod}config on x86_64 and i386.
      Signed-off-by: default avatarAuke Kok <auke-jan.h.kok@intel.com>
      Acked-by: default avatarDave Jones <davej@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      44c10138
  36. 21 May, 2007 1 commit
    • Alexey Dobriyan's avatar
      Detach sched.h from mm.h · e8edc6e0
      Alexey Dobriyan authored
      First thing mm.h does is including sched.h solely for can_do_mlock() inline
      function which has "current" dereference inside. By dealing with can_do_mlock()
      mm.h can be detached from sched.h which is good. See below, why.
      
      This patch
      a) removes unconditional inclusion of sched.h from mm.h
      b) makes can_do_mlock() normal function in mm/mlock.c
      c) exports can_do_mlock() to not break compilation
      d) adds sched.h inclusions back to files that were getting it indirectly.
      e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
         getting them indirectly
      
      Net result is:
      a) mm.h users would get less code to open, read, preprocess, parse, ... if
         they don't need sched.h
      b) sched.h stops being dependency for significant number of files:
         on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
         after patch it's only 3744 (-8.3%).
      
      Cross-compile tested on
      
      	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
      	alpha alpha-up
      	arm
      	i386 i386-up i386-defconfig i386-allnoconfig
      	ia64 ia64-up
      	m68k
      	mips
      	parisc parisc-up
      	powerpc powerpc-up
      	s390 s390-up
      	sparc sparc-up
      	sparc64 sparc64-up
      	um-x86_64
      	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig
      
      as well as my two usual configs.
      Signed-off-by: default avatarAlexey Dobriyan <adobriyan@gmail.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e8edc6e0
  37. 26 Feb, 2007 1 commit
  38. 23 Feb, 2007 1 commit