1. 28 Jun, 2018 1 commit
    • Linus Torvalds's avatar
      Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL · a11e1d43
      Linus Torvalds authored
      The poll() changes were not well thought out, and completely
      unexplained.  They also caused a huge performance regression, because
      "->poll()" was no longer a trivial file operation that just called down
      to the underlying file operations, but instead did at least two indirect
      calls.
      
      Indirect calls are sadly slow now with the Spectre mitigation, but the
      performance problem could at least be largely mitigated by changing the
      "->get_poll_head()" operation to just have a per-file-descriptor pointer
      to the poll head instead.  That gets rid of one of the new indirections.
      
      But that doesn't fix the new complexity that is completely unwarranted
      for the regular case.  The (undocumented) reason for the poll() changes
      was some alleged AIO poll race fixing, but we don't make the common case
      slower and more complex for some uncommon special case, so this all
      really needs way more explanations and most likely a fundamental
      redesign.
      
      [ This revert is a revert of about 30 different commits, not reverted
        individually because that would just be unnecessarily messy  - Linus ]
      
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Christoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a11e1d43
  2. 26 May, 2018 1 commit
  3. 16 May, 2018 2 commits
  4. 26 Mar, 2018 1 commit
  5. 12 Feb, 2018 1 commit
    • Denys Vlasenko's avatar
      net: make getname() functions return length rather than use int* parameter · 9b2c45d4
      Denys Vlasenko authored
      Changes since v1:
      Added changes in these files:
          drivers/infiniband/hw/usnic/usnic_transport.c
          drivers/staging/lustre/lnet/lnet/lib-socket.c
          drivers/target/iscsi/iscsi_target_login.c
          drivers/vhost/net.c
          fs/dlm/lowcomms.c
          fs/ocfs2/cluster/tcp.c
          security/tomoyo/network.c
      
      Before:
      All these functions either return a negative error indicator,
      or store length of sockaddr into "int *socklen" parameter
      and return zero on success.
      
      "int *socklen" parameter is awkward. For example, if caller does not
      care, it still needs to provide on-stack storage for the value
      it does not need.
      
      None of the many FOO_getname() functions of various protocols
      ever used old value of *socklen. They always just overwrite it.
      
      This change drops this parameter, and makes all these functions, on success,
      return length of sockaddr. It's always >= 0 and can be differentiated
      from an error.
      
      Tests in callers are changed from "if (err)" to "if (err < 0)", where needed.
      
      rpc_sockname() lost "int buflen" parameter, since its only use was
      to be passed to kernel_getsockname() as &buflen and subsequently
      not used in any way.
      
      Userspace API is not changed.
      
          text    data     bss      dec     hex filename
      30108430 2633624  873672 33615726 200ef6e vmlinux.before.o
      30108109 2633612  873672 33615393 200ee21 vmlinux.o
      Signed-off-by: default avatarDenys Vlasenko <dvlasenk@redhat.com>
      CC: David S. Miller <davem@davemloft.net>
      CC: linux-kernel@vger.kernel.org
      CC: netdev@vger.kernel.org
      CC: linux-bluetooth@vger.kernel.org
      CC: linux-decnet-user@lists.sourceforge.net
      CC: linux-wireless@vger.kernel.org
      CC: linux-rdma@vger.kernel.org
      CC: linux-sctp@vger.kernel.org
      CC: linux-nfs@vger.kernel.org
      CC: linux-x25@vger.kernel.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9b2c45d4
  6. 16 Jan, 2018 1 commit
    • Alexey Dobriyan's avatar
      net: delete /proc THIS_MODULE references · 96890d62
      Alexey Dobriyan authored
      /proc has been ignoring struct file_operations::owner field for 10 years.
      Specifically, it started with commit 786d7e16
      ("Fix rmmod/read/write races in /proc entries"). Notice the chunk where
      inode->i_fop is initialized with proxy struct file_operations for
      regular files:
      
      	-               if (de->proc_fops)
      	-                       inode->i_fop = de->proc_fops;
      	+               if (de->proc_fops) {
      	+                       if (S_ISREG(inode->i_mode))
      	+                               inode->i_fop = &proc_reg_file_ops;
      	+                       else
      	+                               inode->i_fop = de->proc_fops;
      	+               }
      
      VFS stopped pinning module at this point.
      Signed-off-by: default avatarAlexey Dobriyan <adobriyan@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      96890d62
  7. 21 Nov, 2017 1 commit
    • Kees Cook's avatar
      treewide: setup_timer() -> timer_setup() · e99e88a9
      Kees Cook authored
      This converts all remaining cases of the old setup_timer() API into using
      timer_setup(), where the callback argument is the structure already
      holding the struct timer_list. These should have no behavioral changes,
      since they just change which pointer is passed into the callback with
      the same available pointers after conversion. It handles the following
      examples, in addition to some other variations.
      
      Casting from unsigned long:
      
          void my_callback(unsigned long data)
          {
              struct something *ptr = (struct something *)data;
          ...
          }
          ...
          setup_timer(&ptr->my_timer, my_callback, ptr);
      
      and forced object casts:
      
          void my_callback(struct something *ptr)
          {
          ...
          }
          ...
          setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr);
      
      become:
      
          void my_callback(struct timer_list *t)
          {
              struct something *ptr = from_timer(ptr, t, my_timer);
          ...
          }
          ...
          timer_setup(&ptr->my_timer, my_callback, 0);
      
      Direct function assignments:
      
          void my_callback(unsigned long data)
          {
              struct something *ptr = (struct something *)data;
          ...
          }
          ...
          ptr->my_timer.function = my_callback;
      
      have a temporary cast added, along with converting the args:
      
          void my_callback(struct timer_list *t)
          {
              struct something *ptr = from_timer(ptr, t, my_timer);
          ...
          }
          ...
          ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback;
      
      And finally, callbacks without a data assignment:
      
          void my_callback(unsigned long data)
          {
          ...
          }
          ...
          setup_timer(&ptr->my_timer, my_callback, 0);
      
      have their argument renamed to verify they're unused during conversion:
      
          void my_callback(struct timer_list *unused)
          {
          ...
          }
          ...
          timer_setup(&ptr->my_timer, my_callback, 0);
      
      The conversion is done with the following Coccinelle script:
      
      spatch --very-quiet --all-includes --include-headers \
      	-I ./arch/x86/include -I ./arch/x86/include/generated \
      	-I ./include -I ./arch/x86/include/uapi \
      	-I ./arch/x86/include/generated/uapi -I ./include/uapi \
      	-I ./include/generated/uapi --include ./include/linux/kconfig.h \
      	--dir . \
      	--cocci-file ~/src/data/timer_setup.cocci
      
      @fix_address_of@
      expression e;
      @@
      
       setup_timer(
      -&(e)
      +&e
       , ...)
      
      // Update any raw setup_timer() usages that have a NULL callback, but
      // would otherwise match change_timer_function_usage, since the latter
      // will update all function assignments done in the face of a NULL
      // function initialization in setup_timer().
      @change_timer_function_usage_NULL@
      expression _E;
      identifier _timer;
      type _cast_data;
      @@
      
      (
      -setup_timer(&_E->_timer, NULL, _E);
      +timer_setup(&_E->_timer, NULL, 0);
      |
      -setup_timer(&_E->_timer, NULL, (_cast_data)_E);
      +timer_setup(&_E->_timer, NULL, 0);
      |
      -setup_timer(&_E._timer, NULL, &_E);
      +timer_setup(&_E._timer, NULL, 0);
      |
      -setup_timer(&_E._timer, NULL, (_cast_data)&_E);
      +timer_setup(&_E._timer, NULL, 0);
      )
      
      @change_timer_function_usage@
      expression _E;
      identifier _timer;
      struct timer_list _stl;
      identifier _callback;
      type _cast_func, _cast_data;
      @@
      
      (
      -setup_timer(&_E->_timer, _callback, _E);
      +timer_setup(&_E->_timer, _callback, 0);
      |
      -setup_timer(&_E->_timer, &_callback, _E);
      +timer_setup(&_E->_timer, _callback, 0);
      |
      -setup_timer(&_E->_timer, _callback, (_cast_data)_E);
      +timer_setup(&_E->_timer, _callback, 0);
      |
      -setup_timer(&_E->_timer, &_callback, (_cast_data)_E);
      +timer_setup(&_E->_timer, _callback, 0);
      |
      -setup_timer(&_E->_timer, (_cast_func)_callback, _E);
      +timer_setup(&_E->_timer, _callback, 0);
      |
      -setup_timer(&_E->_timer, (_cast_func)&_callback, _E);
      +timer_setup(&_E->_timer, _callback, 0);
      |
      -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E);
      +timer_setup(&_E->_timer, _callback, 0);
      |
      -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E);
      +timer_setup(&_E->_timer, _callback, 0);
      |
      -setup_timer(&_E._timer, _callback, (_cast_data)_E);
      +timer_setup(&_E._timer, _callback, 0);
      |
      -setup_timer(&_E._timer, _callback, (_cast_data)&_E);
      +timer_setup(&_E._timer, _callback, 0);
      |
      -setup_timer(&_E._timer, &_callback, (_cast_data)_E);
      +timer_setup(&_E._timer, _callback, 0);
      |
      -setup_timer(&_E._timer, &_callback, (_cast_data)&_E);
      +timer_setup(&_E._timer, _callback, 0);
      |
      -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E);
      +timer_setup(&_E._timer, _callback, 0);
      |
      -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E);
      +timer_setup(&_E._timer, _callback, 0);
      |
      -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E);
      +timer_setup(&_E._timer, _callback, 0);
      |
      -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E);
      +timer_setup(&_E._timer, _callback, 0);
      |
       _E->_timer@_stl.function = _callback;
      |
       _E->_timer@_stl.function = &_callback;
      |
       _E->_timer@_stl.function = (_cast_func)_callback;
      |
       _E->_timer@_stl.function = (_cast_func)&_callback;
      |
       _E._timer@_stl.function = _callback;
      |
       _E._timer@_stl.function = &_callback;
      |
       _E._timer@_stl.function = (_cast_func)_callback;
      |
       _E._timer@_stl.function = (_cast_func)&_callback;
      )
      
      // callback(unsigned long arg)
      @change_callback_handle_cast
       depends on change_timer_function_usage@
      identifier change_timer_function_usage._callback;
      identifier change_timer_function_usage._timer;
      type _origtype;
      identifier _origarg;
      type _handletype;
      identifier _handle;
      @@
      
       void _callback(
      -_origtype _origarg
      +struct timer_list *t
       )
       {
      (
      	... when != _origarg
      	_handletype *_handle =
      -(_handletype *)_origarg;
      +from_timer(_handle, t, _timer);
      	... when != _origarg
      |
      	... when != _origarg
      	_handletype *_handle =
      -(void *)_origarg;
      +from_timer(_handle, t, _timer);
      	... when != _origarg
      |
      	... when != _origarg
      	_handletype *_handle;
      	... when != _handle
      	_handle =
      -(_handletype *)_origarg;
      +from_timer(_handle, t, _timer);
      	... when != _origarg
      |
      	... when != _origarg
      	_handletype *_handle;
      	... when != _handle
      	_handle =
      -(void *)_origarg;
      +from_timer(_handle, t, _timer);
      	... when != _origarg
      )
       }
      
      // callback(unsigned long arg) without existing variable
      @change_callback_handle_cast_no_arg
       depends on change_timer_function_usage &&
                           !change_callback_handle_cast@
      identifier change_timer_function_usage._callback;
      identifier change_timer_function_usage._timer;
      type _origtype;
      identifier _origarg;
      type _handletype;
      @@
      
       void _callback(
      -_origtype _origarg
      +struct timer_list *t
       )
       {
      +	_handletype *_origarg = from_timer(_origarg, t, _timer);
      +
      	... when != _origarg
      -	(_handletype *)_origarg
      +	_origarg
      	... when != _origarg
       }
      
      // Avoid already converted callbacks.
      @match_callback_converted
       depends on change_timer_function_usage &&
                  !change_callback_handle_cast &&
      	    !change_callback_handle_cast_no_arg@
      identifier change_timer_function_usage._callback;
      identifier t;
      @@
      
       void _callback(struct timer_list *t)
       { ... }
      
      // callback(struct something *handle)
      @change_callback_handle_arg
       depends on change_timer_function_usage &&
      	    !match_callback_converted &&
                  !change_callback_handle_cast &&
                  !change_callback_handle_cast_no_arg@
      identifier change_timer_function_usage._callback;
      identifier change_timer_function_usage._timer;
      type _handletype;
      identifier _handle;
      @@
      
       void _callback(
      -_handletype *_handle
      +struct timer_list *t
       )
       {
      +	_handletype *_handle = from_timer(_handle, t, _timer);
      	...
       }
      
      // If change_callback_handle_arg ran on an empty function, remove
      // the added handler.
      @unchange_callback_handle_arg
       depends on change_timer_function_usage &&
      	    change_callback_handle_arg@
      identifier change_timer_function_usage._callback;
      identifier change_timer_function_usage._timer;
      type _handletype;
      identifier _handle;
      identifier t;
      @@
      
       void _callback(struct timer_list *t)
       {
      -	_handletype *_handle = from_timer(_handle, t, _timer);
       }
      
      // We only want to refactor the setup_timer() data argument if we've found
      // the matching callback. This undoes changes in change_timer_function_usage.
      @unchange_timer_function_usage
       depends on change_timer_function_usage &&
                  !change_callback_handle_cast &&
                  !change_callback_handle_cast_no_arg &&
      	    !change_callback_handle_arg@
      expression change_timer_function_usage._E;
      identifier change_timer_function_usage._timer;
      identifier change_timer_function_usage._callback;
      type change_timer_function_usage._cast_data;
      @@
      
      (
      -timer_setup(&_E->_timer, _callback, 0);
      +setup_timer(&_E->_timer, _callback, (_cast_data)_E);
      |
      -timer_setup(&_E._timer, _callback, 0);
      +setup_timer(&_E._timer, _callback, (_cast_data)&_E);
      )
      
      // If we fixed a callback from a .function assignment, fix the
      // assignment cast now.
      @change_timer_function_assignment
       depends on change_timer_function_usage &&
                  (change_callback_handle_cast ||
                   change_callback_handle_cast_no_arg ||
                   change_callback_handle_arg)@
      expression change_timer_function_usage._E;
      identifier change_timer_function_usage._timer;
      identifier change_timer_function_usage._callback;
      type _cast_func;
      typedef TIMER_FUNC_TYPE;
      @@
      
      (
       _E->_timer.function =
      -_callback
      +(TIMER_FUNC_TYPE)_callback
       ;
      |
       _E->_timer.function =
      -&_callback
      +(TIMER_FUNC_TYPE)_callback
       ;
      |
       _E->_timer.function =
      -(_cast_func)_callback;
      +(TIMER_FUNC_TYPE)_callback
       ;
      |
       _E->_timer.function =
      -(_cast_func)&_callback
      +(TIMER_FUNC_TYPE)_callback
       ;
      |
       _E._timer.function =
      -_callback
      +(TIMER_FUNC_TYPE)_callback
       ;
      |
       _E._timer.function =
      -&_callback;
      +(TIMER_FUNC_TYPE)_callback
       ;
      |
       _E._timer.function =
      -(_cast_func)_callback
      +(TIMER_FUNC_TYPE)_callback
       ;
      |
       _E._timer.function =
      -(_cast_func)&_callback
      +(TIMER_FUNC_TYPE)_callback
       ;
      )
      
      // Sometimes timer functions are called directly. Replace matched args.
      @change_timer_function_calls
       depends on change_timer_function_usage &&
                  (change_callback_handle_cast ||
                   change_callback_handle_cast_no_arg ||
                   change_callback_handle_arg)@
      expression _E;
      identifier change_timer_function_usage._timer;
      identifier change_timer_function_usage._callback;
      type _cast_data;
      @@
      
       _callback(
      (
      -(_cast_data)_E
      +&_E->_timer
      |
      -(_cast_data)&_E
      +&_E._timer
      |
      -_E
      +&_E->_timer
      )
       )
      
      // If a timer has been configured without a data argument, it can be
      // converted without regard to the callback argument, since it is unused.
      @match_timer_function_unused_data@
      expression _E;
      identifier _timer;
      identifier _callback;
      @@
      
      (
      -setup_timer(&_E->_timer, _callback, 0);
      +timer_setup(&_E->_timer, _callback, 0);
      |
      -setup_timer(&_E->_timer, _callback, 0L);
      +timer_setup(&_E->_timer, _callback, 0);
      |
      -setup_timer(&_E->_timer, _callback, 0UL);
      +timer_setup(&_E->_timer, _callback, 0);
      |
      -setup_timer(&_E._timer, _callback, 0);
      +timer_setup(&_E._timer, _callback, 0);
      |
      -setup_timer(&_E._timer, _callback, 0L);
      +timer_setup(&_E._timer, _callback, 0);
      |
      -setup_timer(&_E._timer, _callback, 0UL);
      +timer_setup(&_E._timer, _callback, 0);
      |
      -setup_timer(&_timer, _callback, 0);
      +timer_setup(&_timer, _callback, 0);
      |
      -setup_timer(&_timer, _callback, 0L);
      +timer_setup(&_timer, _callback, 0);
      |
      -setup_timer(&_timer, _callback, 0UL);
      +timer_setup(&_timer, _callback, 0);
      |
      -setup_timer(_timer, _callback, 0);
      +timer_setup(_timer, _callback, 0);
      |
      -setup_timer(_timer, _callback, 0L);
      +timer_setup(_timer, _callback, 0);
      |
      -setup_timer(_timer, _callback, 0UL);
      +timer_setup(_timer, _callback, 0);
      )
      
      @change_callback_unused_data
       depends on match_timer_function_unused_data@
      identifier match_timer_function_unused_data._callback;
      type _origtype;
      identifier _origarg;
      @@
      
       void _callback(
      -_origtype _origarg
      +struct timer_list *unused
       )
       {
      	... when != _origarg
       }
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      e99e88a9
  8. 02 Nov, 2017 1 commit
    • Greg Kroah-Hartman's avatar
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      Greg Kroah-Hartman authored
      Many source files in the tree are missing licensing information, which
      makes it harder for compliance tools to determine the correct license.
      
      By default all files without license information are under the default
      license of the kernel, which is GPL version 2.
      
      Update the files which contain no license information with the 'GPL-2.0'
      SPDX license identifier.  The SPDX identifier is a legally binding
      shorthand, which can be used instead of the full boiler plate text.
      
      This patch is based on work done by Thomas Gleixner and Kate Stewart and
      Philippe Ombredanne.
      
      How this work was done:
      
      Patches were generated and checked against linux-4.14-rc6 for a subset of
      the use cases:
       - file had no licensing information it it.
       - file was a */uapi/* one with no licensing information in it,
       - file was a */uapi/* one with existing licensing information,
      
      Further patches will be generated in subsequent months to fix up cases
      where non-standard license headers were used, and references to license
      had to be inferred by heuristics based on keywords.
      
      The analysis to determine which SPDX License Identifier to be applied to
      a file was done in a spreadsheet of side by side results from of the
      output of two independent scanners (ScanCode & Windriver) producing SPDX
      tag:value files created by Philippe Ombredanne.  Philippe prepared the
      base worksheet, and did an initial spot review of a few 1000 files.
      
      The 4.13 kernel was the starting point of the analysis with 60,537 files
      assessed.  Kate Stewart did a file by file comparison of the scanner
      results in the spreadsheet to determine which SPDX license identifier(s)
      to be applied to the file. She confirmed any determination that was not
      immediately clear with lawyers working with the Linux Foundation.
      
      Criteria used to select files for SPDX license identifier tagging was:
       - Files considered eligible had to be source code files.
       - Make and config files were included as candidates if they contained >5
         lines of source
       - File already had some variant of a license header in it (even if <5
         lines).
      
      All documentation files were explicitly excluded.
      
      The following heuristics were used to determine which SPDX license
      identifiers to apply.
      
       - when both scanners couldn't find any license traces, file was
         considered to have no license information in it, and the top level
         COPYING file license applied.
      
         For non */uapi/* files that summary was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0                                              11139
      
         and resulted in the first patch in this series.
      
         If that file was a */uapi/* path one, it was "GPL-2.0 WITH
         Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0 WITH Linux-syscall-note                        930
      
         and resulted in the second patch in this series.
      
       - if a file had some form of licensing information in it, and was one
         of the */uapi/* ones, it was denoted with the Linux-syscall-note if
         any GPL family license was found in the file or had no licensing in
         it (per prior point).  Results summary:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|------
         GPL-2.0 WITH Linux-syscall-note                       270
         GPL-2.0+ WITH Linux-syscall-note                      169
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
         LGPL-2.1+ WITH Linux-syscall-note                      15
         GPL-1.0+ WITH Linux-syscall-note                       14
         ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
         LGPL-2.0+ WITH Linux-syscall-note                       4
         LGPL-2.1 WITH Linux-syscall-note                        3
         ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
         ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
      
         and that resulted in the third patch in this series.
      
       - when the two scanners agreed on the detected license(s), that became
         the concluded license(s).
      
       - when there was disagreement between the two scanners (one detected a
         license but the other didn't, or they both detected different
         licenses) a manual inspection of the file occurred.
      
       - In most cases a manual inspection of the information in the file
         resulted in a clear resolution of the license that should apply (and
         which scanner probably needed to revisit its heuristics).
      
       - When it was not immediately clear, the license identifier was
         confirmed with lawyers working with the Linux Foundation.
      
       - If there was any question as to the appropriate license identifier,
         the file was flagged for further research and to be revisited later
         in time.
      
      In total, over 70 hours of logged manual review was done on the
      spreadsheet to determine the SPDX license identifiers to apply to the
      source files by Kate, Philippe, Thomas and, in some cases, confirmation
      by lawyers working with the Linux Foundation.
      
      Kate also obtained a third independent scan of the 4.13 code base from
      FOSSology, and compared selected files where the other two scanners
      disagreed against that SPDX file, to see if there was new insights.  The
      Windriver scanner is based on an older version of FOSSology in part, so
      they are related.
      
      Thomas did random spot checks in about 500 files from the spreadsheets
      for the uapi headers and agreed with SPDX license identifier in the
      files he inspected. For the non-uapi files Thomas did random spot checks
      in about 15000 files.
      
      In initial set of patches against 4.14-rc6, 3 files were found to have
      copy/paste license identifier errors, and have been fixed to reflect the
      correct identifier.
      
      Additionally Philippe spent 10 hours this week doing a detailed manual
      inspection and review of the 12,461 patched files from the initial patch
      version early this week with:
       - a full scancode scan run, collecting the matched texts, detected
         license ids and scores
       - reviewing anything where there was a license detected (about 500+
         files) to ensure that the applied SPDX license was correct
       - reviewing anything where there was no detection but the patch license
         was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
         SPDX license was correct
      
      This produced a worksheet with 20 files needing minor correction.  This
      worksheet was then exported into 3 different .csv files for the
      different types of files to be modified.
      
      These .csv files were then reviewed by Greg.  Thomas wrote a script to
      parse the csv files and add the proper SPDX tag to the file, in the
      format that the file expected.  This script was further refined by Greg
      based on the output to detect more types of files automatically and to
      distinguish between header and source .c files (which need different
      comment types.)  Finally Greg ran the script using the .csv files to
      generate the patches.
      Reviewed-by: default avatarKate Stewart <kstewart@linuxfoundation.org>
      Reviewed-by: default avatarPhilippe Ombredanne <pombredanne@nexb.com>
      Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  9. 16 Jun, 2017 2 commits
    • Johannes Berg's avatar
      networking: make skb_push & __skb_push return void pointers · d58ff351
      Johannes Berg authored
      It seems like a historic accident that these return unsigned char *,
      and in many places that means casts are required, more often than not.
      
      Make these functions return void * and remove all the casts across
      the tree, adding a (u8 *) cast only where the unsigned char pointer
      was used directly, all done with the following spatch:
      
          @@
          expression SKB, LEN;
          typedef u8;
          identifier fn = { skb_push, __skb_push, skb_push_rcsum };
          @@
          - *(fn(SKB, LEN))
          + *(u8 *)fn(SKB, LEN)
      
          @@
          expression E, SKB, LEN;
          identifier fn = { skb_push, __skb_push, skb_push_rcsum };
          type T;
          @@
          - E = ((T *)(fn(SKB, LEN)))
          + E = fn(SKB, LEN)
      
          @@
          expression SKB, LEN;
          identifier fn = { skb_push, __skb_push, skb_push_rcsum };
          @@
          - fn(SKB, LEN)[0]
          + *(u8 *)fn(SKB, LEN)
      
      Note that the last part there converts from push(...)[0] to the
      more idiomatic *(u8 *)push(...).
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d58ff351
    • Johannes Berg's avatar
      networking: make skb_put & friends return void pointers · 4df864c1
      Johannes Berg authored
      It seems like a historic accident that these return unsigned char *,
      and in many places that means casts are required, more often than not.
      
      Make these functions (skb_put, __skb_put and pskb_put) return void *
      and remove all the casts across the tree, adding a (u8 *) cast only
      where the unsigned char pointer was used directly, all done with the
      following spatch:
      
          @@
          expression SKB, LEN;
          typedef u8;
          identifier fn = { skb_put, __skb_put };
          @@
          - *(fn(SKB, LEN))
          + *(u8 *)fn(SKB, LEN)
      
          @@
          expression E, SKB, LEN;
          identifier fn = { skb_put, __skb_put };
          type T;
          @@
          - E = ((T *)(fn(SKB, LEN)))
          + E = fn(SKB, LEN)
      
      which actually doesn't cover pskb_put since there are only three
      users overall.
      
      A handful of stragglers were converted manually, notably a macro in
      drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many
      instances in net/bluetooth/hci_sock.c. In the former file, I also
      had to fix one whitespace problem spatch introduced.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4df864c1
  10. 28 Feb, 2017 1 commit
  11. 11 Sep, 2016 1 commit
  12. 18 Feb, 2016 1 commit
  13. 11 May, 2015 1 commit
  14. 03 Mar, 2015 1 commit
  15. 02 Mar, 2015 1 commit
  16. 24 Nov, 2014 1 commit
  17. 05 Nov, 2014 1 commit
    • David S. Miller's avatar
      net: Add and use skb_copy_datagram_msg() helper. · 51f3d02b
      David S. Miller authored
      This encapsulates all of the skb_copy_datagram_iovec() callers
      with call argument signature "skb, offset, msghdr->msg_iov, length".
      
      When we move to iov_iters in the networking, the iov_iter object will
      sit in the msghdr.
      
      Having a helper like this means there will be less places to touch
      during that transformation.
      
      Based upon descriptions and patch from Al Viro.
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      51f3d02b
  18. 15 Jul, 2014 1 commit
    • Tom Gundersen's avatar
      net: set name_assign_type in alloc_netdev() · c835a677
      Tom Gundersen authored
      Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert
      all users to pass NET_NAME_UNKNOWN.
      
      Coccinelle patch:
      
      @@
      expression sizeof_priv, name, setup, txqs, rxqs, count;
      @@
      
      (
      -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs)
      +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs)
      |
      -alloc_netdev_mq(sizeof_priv, name, setup, count)
      +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count)
      |
      -alloc_netdev(sizeof_priv, name, setup)
      +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup)
      )
      
      v9: move comments here from the wrong commit
      Signed-off-by: default avatarTom Gundersen <teg@jklm.no>
      Reviewed-by: default avatarDavid Herrmann <dh.herrmann@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c835a677
  19. 09 Jul, 2014 1 commit
  20. 08 Jul, 2014 1 commit
  21. 23 May, 2014 1 commit
  22. 14 Feb, 2014 3 commits
  23. 22 Jan, 2014 2 commits
    • David S. Miller's avatar
      net: Fix some fallout from the etner_addr_copy() changes. · 9be68c1a
      David S. Miller authored
      net/appletalk/aarp.c: In function ‘__aarp_send_query’:
      net/appletalk/aarp.c:137:2: error: implicit declaration of function ‘ether_addr_copy’ [-Werror=implicit-function-declaration]
       ...
      net/atm/lec.c: In function ‘send_to_lecd’:
      net/atm/lec.c:524:3: warning: passing argument 1 of ‘ether_addr_copy’ from incompatible pointer type [enabled by default]
      In file included from net/atm/lec.c:17:0:
      include/linux/etherdevice.h:227:20: note: expected ‘u8 *’ but argument is of type ‘unsigned char (*)[6]’
       ...
      net/caif/caif_usb.c: In function ‘cfusbl_create’:
      net/caif/caif_usb.c:108:2: error: implicit declaration of function ‘ether_addr_copy’ [-Werror=implicit-function-declaration]
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9be68c1a
    • Joe Perches's avatar
      appletalk: Use ether_addr_copy · 90ccb6aa
      Joe Perches authored
      Use ether_addr_copy instead of memcpy(a, b, ETH_ALEN) to
      save some cycles on arm and powerpc.
      
      Convert struct aarp_entry.hwaddr[6] to hwaddr[ETH_ALEN].
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      90ccb6aa
  24. 19 Jan, 2014 1 commit
  25. 21 Nov, 2013 1 commit
    • Hannes Frederic Sowa's avatar
      net: rework recvmsg handler msg_name and msg_namelen logic · f3d33426
      Hannes Frederic Sowa authored
      This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
      set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
      to return msg_name to the user.
      
      This prevents numerous uninitialized memory leaks we had in the
      recvmsg handlers and makes it harder for new code to accidentally leak
      uninitialized memory.
      
      Optimize for the case recvfrom is called with NULL as address. We don't
      need to copy the address at all, so set it to NULL before invoking the
      recvmsg handler. We can do so, because all the recvmsg handlers must
      cope with the case a plain read() is called on them. read() also sets
      msg_name to NULL.
      
      Also document these changes in include/linux/net.h as suggested by David
      Miller.
      
      Changes since RFC:
      
      Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
      non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
      affect sendto as it would bail out earlier while trying to copy-in the
      address. It also more naturally reflects the logic by the callers of
      verify_iovec.
      
      With this change in place I could remove "
      if (!uaddr || msg_sys->msg_namelen == 0)
      	msg->msg_name = NULL
      ".
      
      This change does not alter the user visible error logic as we ignore
      msg_namelen as long as msg_name is NULL.
      
      Also remove two unnecessary curly brackets in ___sys_recvmsg and change
      comments to netdev style.
      
      Cc: David Miller <davem@davemloft.net>
      Suggested-by: default avatarEric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f3d33426
  26. 15 Aug, 2013 1 commit
  27. 28 May, 2013 1 commit
  28. 25 Apr, 2013 1 commit
  29. 28 Feb, 2013 1 commit
    • Sasha Levin's avatar
      hlist: drop the node parameter from iterators · b67bfe0d
      Sasha Levin authored
      I'm not sure why, but the hlist for each entry iterators were conceived
      
              list_for_each_entry(pos, head, member)
      
      The hlist ones were greedy and wanted an extra parameter:
      
              hlist_for_each_entry(tpos, pos, head, member)
      
      Why did they need an extra pos parameter? I'm not quite sure. Not only
      they don't really need it, it also prevents the iterator from looking
      exactly like the list iterator, which is unfortunate.
      
      Besides the semantic patch, there was some manual work required:
      
       - Fix up the actual hlist iterators in linux/list.h
       - Fix up the declaration of other iterators based on the hlist ones.
       - A very small amount of places were using the 'node' parameter, this
       was modified to use 'obj->member' instead.
       - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
       properly, so those had to be fixed up manually.
      
      The semantic patch which is mostly the work of Peter Senna Tschudin is here:
      
      @@
      iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
      
      type T;
      expression a,c,d,e;
      identifier b;
      statement S;
      @@
      
      -T b;
          <+... when != b
      (
      hlist_for_each_entry(a,
      - b,
      c, d) S
      |
      hlist_for_each_entry_continue(a,
      - b,
      c) S
      |
      hlist_for_each_entry_from(a,
      - b,
      c) S
      |
      hlist_for_each_entry_rcu(a,
      - b,
      c, d) S
      |
      hlist_for_each_entry_rcu_bh(a,
      - b,
      c, d) S
      |
      hlist_for_each_entry_continue_rcu_bh(a,
      - b,
      c) S
      |
      for_each_busy_worker(a, c,
      - b,
      d) S
      |
      ax25_uid_for_each(a,
      - b,
      c) S
      |
      ax25_for_each(a,
      - b,
      c) S
      |
      inet_bind_bucket_for_each(a,
      - b,
      c) S
      |
      sctp_for_each_hentry(a,
      - b,
      c) S
      |
      sk_for_each(a,
      - b,
      c) S
      |
      sk_for_each_rcu(a,
      - b,
      c) S
      |
      sk_for_each_from
      -(a, b)
      +(a)
      S
      + sk_for_each_from(a) S
      |
      sk_for_each_safe(a,
      - b,
      c, d) S
      |
      sk_for_each_bound(a,
      - b,
      c) S
      |
      hlist_for_each_entry_safe(a,
      - b,
      c, d, e) S
      |
      hlist_for_each_entry_continue_rcu(a,
      - b,
      c) S
      |
      nr_neigh_for_each(a,
      - b,
      c) S
      |
      nr_neigh_for_each_safe(a,
      - b,
      c, d) S
      |
      nr_node_for_each(a,
      - b,
      c) S
      |
      nr_node_for_each_safe(a,
      - b,
      c, d) S
      |
      - for_each_gfn_sp(a, c, d, b) S
      + for_each_gfn_sp(a, c, d) S
      |
      - for_each_gfn_indirect_valid_sp(a, c, d, b) S
      + for_each_gfn_indirect_valid_sp(a, c, d) S
      |
      for_each_host(a,
      - b,
      c) S
      |
      for_each_host_safe(a,
      - b,
      c, d) S
      |
      for_each_mesh_entry(a,
      - b,
      c, d) S
      )
          ...+>
      
      [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
      [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
      [akpm@linux-foundation.org: checkpatch fixes]
      [akpm@linux-foundation.org: fix warnings]
      [akpm@linux-foudnation.org: redo intrusive kvm changes]
      Tested-by: default avatarPeter Senna Tschudin <peter.senna@gmail.com>
      Acked-by: default avatarPaul E. McKenney <paulmck@linux.vnet.ibm.com>
      Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Cc: Marcelo Tosatti <mtosatti@redhat.com>
      Cc: Gleb Natapov <gleb@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b67bfe0d
  30. 15 Aug, 2012 1 commit
  31. 11 Jul, 2012 1 commit
  32. 07 Jun, 2012 1 commit
  33. 21 Apr, 2012 2 commits
  34. 05 Apr, 2012 1 commit