1. 28 Dec, 2018 1 commit
  2. 01 Mar, 2018 1 commit
    • Anders Roxell's avatar
      tools/gpio/gpio-event-mon: fix warning · 03fd11b0
      Anders Roxell authored
      PRIu64 is defined in user space to match libc's uint64_t definition.
      However, gpioevent_data structure in the kernel is defined using the
      kernel's own __u64 type.
      gpio-event-mon.c: In function ‘monitor_device’:
      gpio-event-mon.c:102:19: warning: format ‘%lu’ expects argument of type
          ‘long unsigned int’, but argument 3 has type ‘__u64 {aka long long
          unsigned int}’ [-Wformat=]
         fprintf(stdout, "GPIO EVENT %" PRIu64 ": ", event.timestamp);
        LD       /tmp/kselftest/gpiogpio-event-mon-in.o
        LINK     /tmp/kselftest/gpiogpio-event-mon
      Fix is to replace PRIu64 with llu, which we know is what the kernel uses
      for __u64.
      Signed-off-by: default avatarAnders Roxell <anders.roxell@linaro.org>
      Tested-by: default avatarDaniel Díaz <daniel.diaz@linaro.org>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
  3. 21 Feb, 2018 1 commit
    • Martin Kelly's avatar
      tools: fix cross-compile var clobbering · 7ed1c190
      Martin Kelly authored
      Currently a number of Makefiles break when used with toolchains that
      pass extra flags in CC and other cross-compile related variables (such
      as --sysroot).
      Thus we get this error when we use a toolchain that puts --sysroot in
      the CC var:
        ~/src/linux/tools$ make iio
        iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory
          #include <unistd.h>
      This occurs because we clobber several env vars related to
      cross-compiling with lines like this:
        CC = $(CROSS_COMPILE)gcc
      Although this will point to a valid cross-compiler, we lose any extra
      flags that might exist in the CC variable, which can break toolchains
      that rely on them (for example, those that use --sysroot).
      This easily shows up using a Yocto SDK:
        $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi
        $ echo $CC
        arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard
        $ echo $CROSS_COMPILE
        $ echo ${CROSS_COMPILE}gcc
      Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the
      --sysroot and other flags that enable us to find the right libraries to
      link against, so we can't find unistd.h and other libraries and headers.
      Normally with the --sysroot flag we would find unistd.h in the sdk
      directory in the sysroot:
        $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h'
      The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not
      already set, and it compiles correctly with the above toolchain.
      So, generalize the logic that perf uses in the common Makefile and
      remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile.
      Note that this patch does not fix cross-compile for all the tools (some
      have other bugs), but it does fix it for all except usb and acpi, which
      still have other unrelated issues.
      I tested both with and without the patch on native and cross-build and
      there appear to be no regressions.
      Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.comSigned-off-by: default avatarMartin Kelly <martin@martingkelly.com>
      Acked-by: default avatarMark Brown <broonie@kernel.org>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Li Zefan <lizefan@huawei.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Linus Walleij <linus.walleij@linaro.org>
      Cc: "K. Y. Srinivasan" <kys@microsoft.com>
      Cc: Haiyang Zhang <haiyangz@microsoft.com>
      Cc: Stephen Hemminger <sthemmin@microsoft.com>
      Cc: Jonathan Cameron <jic23@kernel.org>
      Cc: Pali Rohar <pali.rohar@gmail.com>
      Cc: Richard Purdie <rpurdie@rpsys.net>
      Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
      Cc: Pavel Machek <pavel@ucw.cz>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
      Cc: Robert Moore <robert.moore@intel.com>
      Cc: Lv Zheng <lv.zheng@intel.com>
      Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Valentina Manea <valentina.manea.m@gmail.com>
      Cc: Shuah Khan <shuah@kernel.org>
      Cc: Mario Limonciello <mario.limonciello@dell.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
  4. 21 Dec, 2017 1 commit
    • Joel Stanley's avatar
      tools/gpio: Fix build error with musl libc · 1696784e
      Joel Stanley authored
      The GPIO tools build fails when using a buildroot toolchain that uses musl
      as it's C library:
      arm-broomstick-linux-musleabi-gcc -Wp,-MD,./.gpio-event-mon.o.d \
       -Wp,-MT,gpio-event-mon.o -O2 -Wall -g -D_GNU_SOURCE \
       -Iinclude -D"BUILD_STR(s)=#s" -c -o gpio-event-mon.o gpio-event-mon.c
      gpio-event-mon.c:30:6: error: unknown type name ‘u_int32_t’; did you mean ‘uint32_t’?
            u_int32_t handleflags,
      The glibc headers installed on my laptop include sys/types.h in
      unistd.h, but it appears that musl does not.
      Fixes: 97f69747 ("tools/gpio: add the gpio-event-mon tool")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
  5. 20 Dec, 2017 1 commit
  6. 02 Nov, 2017 1 commit
    • Greg Kroah-Hartman's avatar
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      Greg Kroah-Hartman authored
      Many source files in the tree are missing licensing information, which
      makes it harder for compliance tools to determine the correct license.
      By default all files without license information are under the default
      license of the kernel, which is GPL version 2.
      Update the files which contain no license information with the 'GPL-2.0'
      SPDX license identifier.  The SPDX identifier is a legally binding
      shorthand, which can be used instead of the full boiler plate text.
      This patch is based on work done by Thomas Gleixner and Kate Stewart and
      Philippe Ombredanne.
      How this work was done:
      Patches were generated and checked against linux-4.14-rc6 for a subset of
      the use cases:
       - file had no licensing information it it.
       - file was a */uapi/* one with no licensing information in it,
       - file was a */uapi/* one with existing licensing information,
      Further patches will be generated in subsequent months to fix up cases
      where non-standard license headers were used, and references to license
      had to be inferred by heuristics based on keywords.
      The analysis to determine which SPDX License Identifier to be applied to
      a file was done in a spreadsheet of side by side results from of the
      output of two independent scanners (ScanCode & Windriver) producing SPDX
      tag:value files created by Philippe Ombredanne.  Philippe prepared the
      base worksheet, and did an initial spot review of a few 1000 files.
      The 4.13 kernel was the starting point of the analysis with 60,537 files
      assessed.  Kate Stewart did a file by file comparison of the scanner
      results in the spreadsheet to determine which SPDX license identifier(s)
      to be applied to the file. She confirmed any determination that was not
      immediately clear with lawyers working with the Linux Foundation.
      Criteria used to select files for SPDX license identifier tagging was:
       - Files considered eligible had to be source code files.
       - Make and config files were included as candidates if they contained >5
         lines of source
       - File already had some variant of a license header in it (even if <5
      All documentation files were explicitly excluded.
      The following heuristics were used to determine which SPDX license
      identifiers to apply.
       - when both scanners couldn't find any license traces, file was
         considered to have no license information in it, and the top level
         COPYING file license applied.
         For non */uapi/* files that summary was:
         SPDX license identifier                            # files
         GPL-2.0                                              11139
         and resulted in the first patch in this series.
         If that file was a */uapi/* path one, it was "GPL-2.0 WITH
         Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
         SPDX license identifier                            # files
         GPL-2.0 WITH Linux-syscall-note                        930
         and resulted in the second patch in this series.
       - if a file had some form of licensing information in it, and was one
         of the */uapi/* ones, it was denoted with the Linux-syscall-note if
         any GPL family license was found in the file or had no licensing in
         it (per prior point).  Results summary:
         SPDX license identifier                            # files
         GPL-2.0 WITH Linux-syscall-note                       270
         GPL-2.0+ WITH Linux-syscall-note                      169
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
         LGPL-2.1+ WITH Linux-syscall-note                      15
         GPL-1.0+ WITH Linux-syscall-note                       14
         ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
         LGPL-2.0+ WITH Linux-syscall-note                       4
         LGPL-2.1 WITH Linux-syscall-note                        3
         ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
         ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
         and that resulted in the third patch in this series.
       - when the two scanners agreed on the detected license(s), that became
         the concluded license(s).
       - when there was disagreement between the two scanners (one detected a
         license but the other didn't, or they both detected different
         licenses) a manual inspection of the file occurred.
       - In most cases a manual inspection of the information in the file
         resulted in a clear resolution of the license that should apply (and
         which scanner probably needed to revisit its heuristics).
       - When it was not immediately clear, the license identifier was
         confirmed with lawyers working with the Linux Foundation.
       - If there was any question as to the appropriate license identifier,
         the file was flagged for further research and to be revisited later
         in time.
      In total, over 70 hours of logged manual review was done on the
      spreadsheet to determine the SPDX license identifiers to apply to the
      source files by Kate, Philippe, Thomas and, in some cases, confirmation
      by lawyers working with the Linux Foundation.
      Kate also obtained a third independent scan of the 4.13 code base from
      FOSSology, and compared selected files where the other two scanners
      disagreed against that SPDX file, to see if there was new insights.  The
      Windriver scanner is based on an older version of FOSSology in part, so
      they are related.
      Thomas did random spot checks in about 500 files from the spreadsheets
      for the uapi headers and agreed with SPDX license identifier in the
      files he inspected. For the non-uapi files Thomas did random spot checks
      in about 15000 files.
      In initial set of patches against 4.14-rc6, 3 files were found to have
      copy/paste license identifier errors, and have been fixed to reflect the
      correct identifier.
      Additionally Philippe spent 10 hours this week doing a detailed manual
      inspection and review of the 12,461 patched files from the initial patch
      version early this week with:
       - a full scancode scan run, collecting the matched texts, detected
         license ids and scores
       - reviewing anything where there was a license detected (about 500+
         files) to ensure that the applied SPDX license was correct
       - reviewing anything where there was no detection but the patch license
         was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
         SPDX license was correct
      This produced a worksheet with 20 files needing minor correction.  This
      worksheet was then exported into 3 different .csv files for the
      different types of files to be modified.
      These .csv files were then reviewed by Greg.  Thomas wrote a script to
      parse the csv files and add the proper SPDX tag to the file, in the
      format that the file expected.  This script was further refined by Greg
      based on the output to detect more types of files automatically and to
      distinguish between header and source .c files (which need different
      comment types.)  Finally Greg ran the script using the .csv files to
      generate the patches.
      Reviewed-by: default avatarKate Stewart <kstewart@linuxfoundation.org>
      Reviewed-by: default avatarPhilippe Ombredanne <pombredanne@nexb.com>
      Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
  7. 06 Oct, 2017 1 commit
  8. 26 Jan, 2017 1 commit
  9. 11 Jan, 2017 1 commit
  10. 11 Dec, 2016 1 commit
  11. 24 Oct, 2016 2 commits
  12. 08 Aug, 2016 1 commit
  13. 23 Jun, 2016 2 commits
  14. 15 Jun, 2016 2 commits
    • Linus Walleij's avatar
      tools/gpio: add the gpio-event-mon tool · 97f69747
      Linus Walleij authored
      The gpio-event-mon is used from userspace as an example of how
      to monitor GPIO line events. It will latch on to a certain
      GPIO line on a certain gpiochip and print timestamped events
      as they arrive.
      Example output:
      $ gpio-event-mon -n gpiochip2 -o 0 -r -f
      Monitoring line 0 on gpiochip2
      Initial line value: 1
      GPIO EVENT 946685798487609863: falling edge
      GPIO EVENT 946685798732482910: rising edge
      GPIO EVENT 946685799115997314: falling edge
      GPIO EVENT 946685799381469726: rising edge
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
    • Linus Walleij's avatar
      tools/gpio: add the gpio-hammer tool · 2a144dd0
      Linus Walleij authored
      The gpio-hammer is used from userspace as an example of how
      to retrieve a GPIO handle for one or several GPIO lines and
      hammer the outputs from low to high and back again. It will
      pulse the selected lines once per second for a specified
      number of times or indefinitely if no loop count is
      Example output:
      $ gpio-hammer -n gpiochip0 -o5 -o6 -o7
      Hammer lines [5, 6, 7] on gpiochip0, initial states: [1, 1, 1]
      [-] [5: 0, 6: 0, 7: 0]
      Tested-by: default avatarMichael Welling <mwelling@ieee.org>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
  15. 31 Mar, 2016 2 commits
  16. 25 Feb, 2016 1 commit
  17. 23 Feb, 2016 1 commit
  18. 19 Feb, 2016 2 commits
    • Linus Walleij's avatar
      gpio: add userspace ABI for GPIO line information · 521a2ad6
      Linus Walleij authored
      This adds a GPIO line ABI for getting name, label and a few select
      flags from the kernel.
      This hides the kernel internals and only tells userspace what it
      may need to know: the different in-kernel consumers are masked
      behind the flag "kernel" and that is all userspace needs to know.
      However electric characteristics like active low, open drain etc
      are reflected to userspace, as this is important information.
      We provide information on all lines on all chips, later on we will
      likely add a flag for the chardev consumer so we can filter and
      display only the lines userspace actually uses in e.g. lsgpio,
      but then we first need an ABI for userspace to grab and use
      (get/set/select direction) a GPIO line.
      Sample output from "lsgpio" on ux500:
      GPIO chip: gpiochip7, "8011e000.gpio", 32 GPIO lines
              line 0: unnamed unlabeled
              line 1: unnamed unlabeled
              line 25: unnamed "SFH7741 Proximity Sensor" [kernel output open-drain]
              line 26: unnamed unlabeled
      Tested-by: default avatarMichael Welling <mwelling@ieee.org>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
    • Linus Walleij's avatar
      gpio: store reflect the label to userspace · df4878e9
      Linus Walleij authored
      The gpio_chip label is useful for userspace to understand what
      kind of GPIO chip it is dealing with. Let's store a copy of this
      label in the gpio_device, add it to the struct passed to userspace
      for GPIO_GET_CHIPINFO_IOCTL and modify lsgpio to show it.
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
  19. 09 Feb, 2016 1 commit
    • Linus Walleij's avatar
      tools/gpio: create GPIO tools · 6d591c46
      Linus Walleij authored
      This creates GPIO tools under tools/gpio/* and adds a single
      example program to list the GPIOs on a system. When proper
      devices are created it provides this minimal output:
      Cc: Johan Hovold <johan@kernel.org>
      Cc: Michael Welling <mwelling@ieee.org>
      Cc: Markus Pargmann <mpa@pengutronix.de>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>