diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_emac.h b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
deleted file mode 100644
index b8260cd8041cf568f46e029f758ba876e3c4619e..0000000000000000000000000000000000000000
--- a/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200_emac.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Ethernet MAC registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_EMAC_H
-#define AT91RM9200_EMAC_H
-
-#define AT91_EMAC_CTL 0x00 /* Control Register */
-#define AT91_EMAC_LB (1 << 0) /* Loopback */
-#define AT91_EMAC_LBL (1 << 1) /* Loopback Local */
-#define AT91_EMAC_RE (1 << 2) /* Receive Enable */
-#define AT91_EMAC_TE (1 << 3) /* Transmit Enable */
-#define AT91_EMAC_MPE (1 << 4) /* Management Port Enable */
-#define AT91_EMAC_CSR (1 << 5) /* Clear Statistics Registers */
-#define AT91_EMAC_INCSTAT (1 << 6) /* Increment Statistics Registers */
-#define AT91_EMAC_WES (1 << 7) /* Write Enable for Statistics Registers */
-#define AT91_EMAC_BP (1 << 8) /* Back Pressure */
-
-#define AT91_EMAC_CFG 0x04 /* Configuration Register */
-#define AT91_EMAC_SPD (1 << 0) /* Speed */
-#define AT91_EMAC_FD (1 << 1) /* Full Duplex */
-#define AT91_EMAC_BR (1 << 2) /* Bit Rate */
-#define AT91_EMAC_CAF (1 << 4) /* Copy All Frames */
-#define AT91_EMAC_NBC (1 << 5) /* No Broadcast */
-#define AT91_EMAC_MTI (1 << 6) /* Multicast Hash Enable */
-#define AT91_EMAC_UNI (1 << 7) /* Unicast Hash Enable */
-#define AT91_EMAC_BIG (1 << 8) /* Receive 1522 Bytes */
-#define AT91_EMAC_EAE (1 << 9) /* External Address Match Enable */
-#define AT91_EMAC_CLK (3 << 10) /* MDC Clock Divisor */
-#define AT91_EMAC_CLK_DIV8 (0 << 10)
-#define AT91_EMAC_CLK_DIV16 (1 << 10)
-#define AT91_EMAC_CLK_DIV32 (2 << 10)
-#define AT91_EMAC_CLK_DIV64 (3 << 10)
-#define AT91_EMAC_RTY (1 << 12) /* Retry Test */
-#define AT91_EMAC_RMII (1 << 13) /* Reduce MII (RMII) */
-
-#define AT91_EMAC_SR 0x08 /* Status Register */
-#define AT91_EMAC_SR_LINK (1 << 0) /* Link */
-#define AT91_EMAC_SR_MDIO (1 << 1) /* MDIO pin */
-#define AT91_EMAC_SR_IDLE (1 << 2) /* PHY idle */
-
-#define AT91_EMAC_TAR 0x0c /* Transmit Address Register */
-
-#define AT91_EMAC_TCR 0x10 /* Transmit Control Register */
-#define AT91_EMAC_LEN (0x7ff << 0) /* Transmit Frame Length */
-#define AT91_EMAC_NCRC (1 << 15) /* No CRC */
-
-#define AT91_EMAC_TSR 0x14 /* Transmit Status Register */
-#define AT91_EMAC_TSR_OVR (1 << 0) /* Transmit Buffer Overrun */
-#define AT91_EMAC_TSR_COL (1 << 1) /* Collision Occurred */
-#define AT91_EMAC_TSR_RLE (1 << 2) /* Retry Limit Exceeded */
-#define AT91_EMAC_TSR_IDLE (1 << 3) /* Transmitter Idle */
-#define AT91_EMAC_TSR_BNQ (1 << 4) /* Transmit Buffer not Queued */
-#define AT91_EMAC_TSR_COMP (1 << 5) /* Transmit Complete */
-#define AT91_EMAC_TSR_UND (1 << 6) /* Transmit Underrun */
-
-#define AT91_EMAC_RBQP 0x18 /* Receive Buffer Queue Pointer */
-
-#define AT91_EMAC_RSR 0x20 /* Receive Status Register */
-#define AT91_EMAC_RSR_BNA (1 << 0) /* Buffer Not Available */
-#define AT91_EMAC_RSR_REC (1 << 1) /* Frame Received */
-#define AT91_EMAC_RSR_OVR (1 << 2) /* RX Overrun */
-
-#define AT91_EMAC_ISR 0x24 /* Interrupt Status Register */
-#define AT91_EMAC_DONE (1 << 0) /* Management Done */
-#define AT91_EMAC_RCOM (1 << 1) /* Receive Complete */
-#define AT91_EMAC_RBNA (1 << 2) /* Receive Buffer Not Available */
-#define AT91_EMAC_TOVR (1 << 3) /* Transmit Buffer Overrun */
-#define AT91_EMAC_TUND (1 << 4) /* Transmit Buffer Underrun */
-#define AT91_EMAC_RTRY (1 << 5) /* Retry Limit */
-#define AT91_EMAC_TBRE (1 << 6) /* Transmit Buffer Register Empty */
-#define AT91_EMAC_TCOM (1 << 7) /* Transmit Complete */
-#define AT91_EMAC_TIDLE (1 << 8) /* Transmit Idle */
-#define AT91_EMAC_LINK (1 << 9) /* Link */
-#define AT91_EMAC_ROVR (1 << 10) /* RX Overrun */
-#define AT91_EMAC_ABT (1 << 11) /* Abort */
-
-#define AT91_EMAC_IER 0x28 /* Interrupt Enable Register */
-#define AT91_EMAC_IDR 0x2c /* Interrupt Disable Register */
-#define AT91_EMAC_IMR 0x30 /* Interrupt Mask Register */
-
-#define AT91_EMAC_MAN 0x34 /* PHY Maintenance Register */
-#define AT91_EMAC_DATA (0xffff << 0) /* MDIO Data */
-#define AT91_EMAC_REGA (0x1f << 18) /* MDIO Register */
-#define AT91_EMAC_PHYA (0x1f << 23) /* MDIO PHY Address */
-#define AT91_EMAC_RW (3 << 28) /* Read/Write operation */
-#define AT91_EMAC_RW_W (1 << 28)
-#define AT91_EMAC_RW_R (2 << 28)
-#define AT91_EMAC_MAN_802_3 0x40020000 /* IEEE 802.3 value */
-
-/*
- * Statistics Registers.
- */
-#define AT91_EMAC_FRA 0x40 /* Frames Transmitted OK */
-#define AT91_EMAC_SCOL 0x44 /* Single Collision Frame */
-#define AT91_EMAC_MCOL 0x48 /* Multiple Collision Frame */
-#define AT91_EMAC_OK 0x4c /* Frames Received OK */
-#define AT91_EMAC_SEQE 0x50 /* Frame Check Sequence Error */
-#define AT91_EMAC_ALE 0x54 /* Alignmemt Error */
-#define AT91_EMAC_DTE 0x58 /* Deffered Transmission Frame */
-#define AT91_EMAC_LCOL 0x5c /* Late Collision */
-#define AT91_EMAC_ECOL 0x60 /* Excessive Collision */
-#define AT91_EMAC_TUE 0x64 /* Transmit Underrun Error */
-#define AT91_EMAC_CSE 0x68 /* Carrier Sense Error */
-#define AT91_EMAC_DRFC 0x6c /* Discard RX Frame */
-#define AT91_EMAC_ROV 0x70 /* Receive Overrun */
-#define AT91_EMAC_CDE 0x74 /* Code Error */
-#define AT91_EMAC_ELR 0x78 /* Excessive Length Error */
-#define AT91_EMAC_RJB 0x7c /* Receive Jabber */
-#define AT91_EMAC_USF 0x80 /* Undersize Frame */
-#define AT91_EMAC_SQEE 0x84 /* SQE Test Error */
-
-/*
- * Address Registers.
- */
-#define AT91_EMAC_HSL 0x90 /* Hash Address Low [31:0] */
-#define AT91_EMAC_HSH 0x94 /* Hash Address High [63:32] */
-#define AT91_EMAC_SA1L 0x98 /* Specific Address 1 Low, bytes 0-3 */
-#define AT91_EMAC_SA1H 0x9c /* Specific Address 1 High, bytes 4-5 */
-#define AT91_EMAC_SA2L 0xa0 /* Specific Address 2 Low, bytes 0-3 */
-#define AT91_EMAC_SA2H 0xa4 /* Specific Address 2 High, bytes 4-5 */
-#define AT91_EMAC_SA3L 0xa8 /* Specific Address 3 Low, bytes 0-3 */
-#define AT91_EMAC_SA3H 0xac /* Specific Address 3 High, bytes 4-5 */
-#define AT91_EMAC_SA4L 0xb0 /* Specific Address 4 Low, bytes 0-3 */
-#define AT91_EMAC_SA4H 0xb4 /* Specific Address 4 High, bytes 4-5 */
-
-#endif
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index db931916da08c8ddfd26b9068a94b7dddd1bfb46..57f78abe11d9f1466dadf133b29021863a6dc115 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -27,7 +27,7 @@ config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
depends on ARM && ARCH_AT91RM9200
select NET_CORE
- select MII
+ select PHYLIB
---help---
If you wish to compile a kernel for the AT91RM9200 and enable
ethernet support, then you should always answer Y to this.
diff --git a/drivers/net/ethernet/cadence/Makefile b/drivers/net/ethernet/cadence/Makefile
index 9068b8331ed18b52f5df76b75d5f5f9ad4125cf2..798b1e0fd220edcb21f254deea16a06aab2835ec 100644
--- a/drivers/net/ethernet/cadence/Makefile
+++ b/drivers/net/ethernet/cadence/Makefile
@@ -2,5 +2,5 @@
# Makefile for the Atmel network device drivers.
#
-obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
+obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o macb.o
obj-$(CONFIG_MACB) += macb.o
diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
index 4e980a7886fb58758fa84071b2494f56364da1f2..375d272d1a5fcf5921dcb3097de905973767635f 100644
--- a/drivers/net/ethernet/cadence/at91_ether.c
+++ b/drivers/net/ethernet/cadence/at91_ether.c
@@ -20,7 +20,6 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/mii.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
@@ -31,402 +30,19 @@
#include <linux/clk.h>
#include <linux/gfp.h>
#include <linux/phy.h>
+#include <linux/io.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
#include <asm/mach-types.h>
-#include <mach/at91rm9200_emac.h>
-#include <asm/gpio.h>
-#include <mach/board.h>
-
-#include "at91_ether.h"
+#include "macb.h"
#define DRV_NAME "at91_ether"
#define DRV_VERSION "1.0"
-#define LINK_POLL_INTERVAL (HZ)
-
-/* ..................................................................... */
-
-/*
- * Read from a EMAC register.
- */
-static inline unsigned long at91_emac_read(struct at91_private *lp, unsigned int reg)
-{
- return __raw_readl(lp->emac_base + reg);
-}
-
-/*
- * Write to a EMAC register.
- */
-static inline void at91_emac_write(struct at91_private *lp, unsigned int reg, unsigned long value)
-{
- __raw_writel(value, lp->emac_base + reg);
-}
-
-/* ........................... PHY INTERFACE ........................... */
-
-/*
- * Enable the MDIO bit in MAC control register
- * When not called from an interrupt-handler, access to the PHY must be
- * protected by a spinlock.
- */
-static void enable_mdi(struct at91_private *lp)
-{
- unsigned long ctl;
-
- ctl = at91_emac_read(lp, AT91_EMAC_CTL);
- at91_emac_write(lp, AT91_EMAC_CTL, ctl | AT91_EMAC_MPE); /* enable management port */
-}
-
-/*
- * Disable the MDIO bit in the MAC control register
- */
-static void disable_mdi(struct at91_private *lp)
-{
- unsigned long ctl;
-
- ctl = at91_emac_read(lp, AT91_EMAC_CTL);
- at91_emac_write(lp, AT91_EMAC_CTL, ctl & ~AT91_EMAC_MPE); /* disable management port */
-}
-
-/*
- * Wait until the PHY operation is complete.
- */
-static inline void at91_phy_wait(struct at91_private *lp)
-{
- unsigned long timeout = jiffies + 2;
-
- while (!(at91_emac_read(lp, AT91_EMAC_SR) & AT91_EMAC_SR_IDLE)) {
- if (time_after(jiffies, timeout)) {
- printk("at91_ether: MIO timeout\n");
- break;
- }
- cpu_relax();
- }
-}
-
-/*
- * Write value to the a PHY register
- * Note: MDI interface is assumed to already have been enabled.
- */
-static void write_phy(struct at91_private *lp, unsigned char phy_addr, unsigned char address, unsigned int value)
-{
- at91_emac_write(lp, AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_W
- | ((phy_addr & 0x1f) << 23) | (address << 18) | (value & AT91_EMAC_DATA));
-
- /* Wait until IDLE bit in Network Status register is cleared */
- at91_phy_wait(lp);
-}
-
-/*
- * Read value stored in a PHY register.
- * Note: MDI interface is assumed to already have been enabled.
- */
-static void read_phy(struct at91_private *lp, unsigned char phy_addr, unsigned char address, unsigned int *value)
-{
- at91_emac_write(lp, AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_R
- | ((phy_addr & 0x1f) << 23) | (address << 18));
-
- /* Wait until IDLE bit in Network Status register is cleared */
- at91_phy_wait(lp);
-
- *value = at91_emac_read(lp, AT91_EMAC_MAN) & AT91_EMAC_DATA;
-}
-
-/* ........................... PHY MANAGEMENT .......................... */
-
-/*
- * Access the PHY to determine the current link speed and mode, and update the
- * MAC accordingly.
- * If no link or auto-negotiation is busy, then no changes are made.
- */
-static void update_linkspeed(struct net_device *dev, int silent)
-{
- struct at91_private *lp = netdev_priv(dev);
- unsigned int bmsr, bmcr, lpa, mac_cfg;
- unsigned int speed, duplex;
-
- if (!mii_link_ok(&lp->mii)) { /* no link */
- netif_carrier_off(dev);
- if (!silent)
- printk(KERN_INFO "%s: Link down.\n", dev->name);
- return;
- }
-
- /* Link up, or auto-negotiation still in progress */
- read_phy(lp, lp->phy_address, MII_BMSR, &bmsr);
- read_phy(lp, lp->phy_address, MII_BMCR, &bmcr);
- if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */
- if (!(bmsr & BMSR_ANEGCOMPLETE))
- return; /* Do nothing - another interrupt generated when negotiation complete */
-
- read_phy(lp, lp->phy_address, MII_LPA, &lpa);
- if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100;
- else speed = SPEED_10;
- if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL)) duplex = DUPLEX_FULL;
- else duplex = DUPLEX_HALF;
- } else {
- speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
- duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
- }
-
- /* Update the MAC */
- mac_cfg = at91_emac_read(lp, AT91_EMAC_CFG) & ~(AT91_EMAC_SPD | AT91_EMAC_FD);
- if (speed == SPEED_100) {
- if (duplex == DUPLEX_FULL) /* 100 Full Duplex */
- mac_cfg |= AT91_EMAC_SPD | AT91_EMAC_FD;
- else /* 100 Half Duplex */
- mac_cfg |= AT91_EMAC_SPD;
- } else {
- if (duplex == DUPLEX_FULL) /* 10 Full Duplex */
- mac_cfg |= AT91_EMAC_FD;
- else {} /* 10 Half Duplex */
- }
- at91_emac_write(lp, AT91_EMAC_CFG, mac_cfg);
-
- if (!silent)
- printk(KERN_INFO "%s: Link now %i-%s\n", dev->name, speed, (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
- netif_carrier_on(dev);
-}
-
-/*
- * Handle interrupts from the PHY
- */
-static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *) dev_id;
- struct at91_private *lp = netdev_priv(dev);
- unsigned int phy;
-
- /*
- * This hander is triggered on both edges, but the PHY chips expect
- * level-triggering. We therefore have to check if the PHY actually has
- * an IRQ pending.
- */
- enable_mdi(lp);
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
- read_phy(lp, lp->phy_address, MII_DSINTR_REG, &phy); /* ack interrupt in Davicom PHY */
- if (!(phy & (1 << 0)))
- goto done;
- }
- else if (lp->phy_type == MII_LXT971A_ID) {
- read_phy(lp, lp->phy_address, MII_ISINTS_REG, &phy); /* ack interrupt in Intel PHY */
- if (!(phy & (1 << 2)))
- goto done;
- }
- else if (lp->phy_type == MII_BCM5221_ID) {
- read_phy(lp, lp->phy_address, MII_BCMINTR_REG, &phy); /* ack interrupt in Broadcom PHY */
- if (!(phy & (1 << 0)))
- goto done;
- }
- else if (lp->phy_type == MII_KS8721_ID) {
- read_phy(lp, lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */
- if (!(phy & ((1 << 2) | 1)))
- goto done;
- }
- else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */
- read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &phy);
- if (!(phy & ((1 << 2) | 1)))
- goto done;
- }
- else if (lp->phy_type == MII_DP83848_ID) {
- read_phy(lp, lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */
- if (!(phy & (1 << 7)))
- goto done;
- }
-
- update_linkspeed(dev, 0);
-
-done:
- disable_mdi(lp);
-
- return IRQ_HANDLED;
-}
-
-/*
- * Initialize and enable the PHY interrupt for link-state changes
- */
-static void enable_phyirq(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- unsigned int dsintr, irq_number;
- int status;
-
- if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
- /*
- * PHY doesn't have an IRQ pin (RTL8201, DP83847, AC101L),
- * or board does not have it connected.
- */
- mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL);
- return;
- }
-
- irq_number = gpio_to_irq(lp->board_data.phy_irq_pin);
- status = request_irq(irq_number, at91ether_phy_interrupt, 0, dev->name, dev);
- if (status) {
- printk(KERN_ERR "at91_ether: PHY IRQ %d request failed - status %d!\n", irq_number, status);
- return;
- }
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */
- read_phy(lp, lp->phy_address, MII_DSINTR_REG, &dsintr);
- dsintr = dsintr & ~0xf00; /* clear bits 8..11 */
- write_phy(lp, lp->phy_address, MII_DSINTR_REG, dsintr);
- }
- else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */
- read_phy(lp, lp->phy_address, MII_ISINTE_REG, &dsintr);
- dsintr = dsintr | 0xf2; /* set bits 1, 4..7 */
- write_phy(lp, lp->phy_address, MII_ISINTE_REG, dsintr);
- }
- else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */
- dsintr = (1 << 15) | ( 1 << 14);
- write_phy(lp, lp->phy_address, MII_BCMINTR_REG, dsintr);
- }
- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
- dsintr = (1 << 10) | ( 1 << 8);
- write_phy(lp, lp->phy_address, MII_TPISTATUS, dsintr);
- }
- else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
- read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &dsintr);
- dsintr = dsintr | 0x500; /* set bits 8, 10 */
- write_phy(lp, lp->phy_address, MII_T78Q21INT_REG, dsintr);
- }
- else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
- read_phy(lp, lp->phy_address, MII_DPMISR_REG, &dsintr);
- dsintr = dsintr | 0x3c; /* set bits 2..5 */
- write_phy(lp, lp->phy_address, MII_DPMISR_REG, dsintr);
- read_phy(lp, lp->phy_address, MII_DPMICR_REG, &dsintr);
- dsintr = dsintr | 0x3; /* set bits 0,1 */
- write_phy(lp, lp->phy_address, MII_DPMICR_REG, dsintr);
- }
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-}
-
-/*
- * Disable the PHY interrupt
- */
-static void disable_phyirq(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- unsigned int dsintr;
- unsigned int irq_number;
-
- if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
- del_timer_sync(&lp->check_timer);
- return;
- }
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */
- read_phy(lp, lp->phy_address, MII_DSINTR_REG, &dsintr);
- dsintr = dsintr | 0xf00; /* set bits 8..11 */
- write_phy(lp, lp->phy_address, MII_DSINTR_REG, dsintr);
- }
- else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */
- read_phy(lp, lp->phy_address, MII_ISINTE_REG, &dsintr);
- dsintr = dsintr & ~0xf2; /* clear bits 1, 4..7 */
- write_phy(lp, lp->phy_address, MII_ISINTE_REG, dsintr);
- }
- else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */
- read_phy(lp, lp->phy_address, MII_BCMINTR_REG, &dsintr);
- dsintr = ~(1 << 14);
- write_phy(lp, lp->phy_address, MII_BCMINTR_REG, dsintr);
- }
- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
- read_phy(lp, lp->phy_address, MII_TPISTATUS, &dsintr);
- dsintr = ~((1 << 10) | (1 << 8));
- write_phy(lp, lp->phy_address, MII_TPISTATUS, dsintr);
- }
- else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
- read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &dsintr);
- dsintr = dsintr & ~0x500; /* clear bits 8, 10 */
- write_phy(lp, lp->phy_address, MII_T78Q21INT_REG, dsintr);
- }
- else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
- read_phy(lp, lp->phy_address, MII_DPMICR_REG, &dsintr);
- dsintr = dsintr & ~0x3; /* clear bits 0, 1 */
- write_phy(lp, lp->phy_address, MII_DPMICR_REG, dsintr);
- read_phy(lp, lp->phy_address, MII_DPMISR_REG, &dsintr);
- dsintr = dsintr & ~0x3c; /* clear bits 2..5 */
- write_phy(lp, lp->phy_address, MII_DPMISR_REG, dsintr);
- }
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-
- irq_number = gpio_to_irq(lp->board_data.phy_irq_pin);
- free_irq(irq_number, dev); /* Free interrupt handler */
-}
-
-/*
- * Perform a software reset of the PHY.
- */
-#if 0
-static void reset_phy(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- unsigned int bmcr;
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- /* Perform PHY reset */
- write_phy(lp, lp->phy_address, MII_BMCR, BMCR_RESET);
-
- /* Wait until PHY reset is complete */
- do {
- read_phy(lp, lp->phy_address, MII_BMCR, &bmcr);
- } while (!(bmcr & BMCR_RESET));
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-}
-#endif
-
-static void at91ether_check_link(unsigned long dev_id)
-{
- struct net_device *dev = (struct net_device *) dev_id;
- struct at91_private *lp = netdev_priv(dev);
-
- enable_mdi(lp);
- update_linkspeed(dev, 1);
- disable_mdi(lp);
-
- mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL);
-}
-
-/*
- * Perform any PHY-specific initialization.
- */
-static void __init initialize_phy(struct at91_private *lp)
-{
- unsigned int val;
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
- read_phy(lp, lp->phy_address, MII_DSCR_REG, &val);
- if ((val & (1 << 10)) == 0) /* DSCR bit 10 is 0 -- fiber mode */
- lp->phy_media = PORT_FIBRE;
- } else if (machine_is_csb337()) {
- /* mix link activity status into LED2 link state */
- write_phy(lp, lp->phy_address, MII_LEDCTRL_REG, 0x0d22);
- } else if (machine_is_ecbat91())
- write_phy(lp, lp->phy_address, MII_LEDCTRL_REG, 0x156A);
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-}
+/* 1518 rounded up */
+#define MAX_RBUFF_SZ 0x600
+/* max number of receive buffers */
+#define MAX_RX_DESCR 9
/* ......................... ADDRESS MANAGEMENT ........................ */
@@ -476,19 +92,19 @@ static short __init unpack_mac_address(struct net_device *dev, unsigned int hi,
*/
static void __init get_mac_address(struct net_device *dev)
{
- struct at91_private *lp = netdev_priv(dev);
+ struct macb *lp = netdev_priv(dev);
/* Check Specific-Address 1 */
- if (unpack_mac_address(dev, at91_emac_read(lp, AT91_EMAC_SA1H), at91_emac_read(lp, AT91_EMAC_SA1L)))
+ if (unpack_mac_address(dev, macb_readl(lp, SA1T), macb_readl(lp, SA1B)))
return;
/* Check Specific-Address 2 */
- if (unpack_mac_address(dev, at91_emac_read(lp, AT91_EMAC_SA2H), at91_emac_read(lp, AT91_EMAC_SA2L)))
+ if (unpack_mac_address(dev, macb_readl(lp, SA2T), macb_readl(lp, SA2B)))
return;
/* Check Specific-Address 3 */
- if (unpack_mac_address(dev, at91_emac_read(lp, AT91_EMAC_SA3H), at91_emac_read(lp, AT91_EMAC_SA3L)))
+ if (unpack_mac_address(dev, macb_readl(lp, SA3T), macb_readl(lp, SA3B)))
return;
/* Check Specific-Address 4 */
- if (unpack_mac_address(dev, at91_emac_read(lp, AT91_EMAC_SA4H), at91_emac_read(lp, AT91_EMAC_SA4L)))
+ if (unpack_mac_address(dev, macb_readl(lp, SA4T), macb_readl(lp, SA4B)))
return;
printk(KERN_ERR "at91_ether: Your bootloader did not configure a MAC address.\n");
@@ -499,13 +115,14 @@ static void __init get_mac_address(struct net_device *dev)
*/
static void update_mac_address(struct net_device *dev)
{
- struct at91_private *lp = netdev_priv(dev);
+ struct macb *lp = netdev_priv(dev);
- at91_emac_write(lp, AT91_EMAC_SA1L, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) | (dev->dev_addr[1] << 8) | (dev->dev_addr[0]));
- at91_emac_write(lp, AT91_EMAC_SA1H, (dev->dev_addr[5] << 8) | (dev->dev_addr[4]));
+ macb_writel(lp, SA1B, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16)
+ | (dev->dev_addr[1] << 8) | (dev->dev_addr[0]));
+ macb_writel(lp, SA1T, (dev->dev_addr[5] << 8) | (dev->dev_addr[4]));
- at91_emac_write(lp, AT91_EMAC_SA2L, 0);
- at91_emac_write(lp, AT91_EMAC_SA2H, 0);
+ macb_writel(lp, SA2B, 0);
+ macb_writel(lp, SA2T, 0);
}
/*
@@ -527,246 +144,60 @@ static int set_mac_address(struct net_device *dev, void* addr)
return 0;
}
-static int inline hash_bit_value(int bitnr, __u8 *addr)
-{
- if (addr[bitnr / 8] & (1 << (bitnr % 8)))
- return 1;
- return 0;
-}
-
-/*
- * The hash address register is 64 bits long and takes up two locations in the memory map.
- * The least significant bits are stored in EMAC_HSL and the most significant
- * bits in EMAC_HSH.
- *
- * The unicast hash enable and the multicast hash enable bits in the network configuration
- * register enable the reception of hash matched frames. The destination address is
- * reduced to a 6 bit index into the 64 bit hash register using the following hash function.
- * The hash function is an exclusive or of every sixth bit of the destination address.
- * hash_index[5] = da[5] ^ da[11] ^ da[17] ^ da[23] ^ da[29] ^ da[35] ^ da[41] ^ da[47]
- * hash_index[4] = da[4] ^ da[10] ^ da[16] ^ da[22] ^ da[28] ^ da[34] ^ da[40] ^ da[46]
- * hash_index[3] = da[3] ^ da[09] ^ da[15] ^ da[21] ^ da[27] ^ da[33] ^ da[39] ^ da[45]
- * hash_index[2] = da[2] ^ da[08] ^ da[14] ^ da[20] ^ da[26] ^ da[32] ^ da[38] ^ da[44]
- * hash_index[1] = da[1] ^ da[07] ^ da[13] ^ da[19] ^ da[25] ^ da[31] ^ da[37] ^ da[43]
- * hash_index[0] = da[0] ^ da[06] ^ da[12] ^ da[18] ^ da[24] ^ da[30] ^ da[36] ^ da[42]
- * da[0] represents the least significant bit of the first byte received, that is, the multicast/
- * unicast indicator, and da[47] represents the most significant bit of the last byte
- * received.
- * If the hash index points to a bit that is set in the hash register then the frame will be
- * matched according to whether the frame is multicast or unicast.
- * A multicast match will be signalled if the multicast hash enable bit is set, da[0] is 1 and
- * the hash index points to a bit set in the hash register.
- * A unicast match will be signalled if the unicast hash enable bit is set, da[0] is 0 and the
- * hash index points to a bit set in the hash register.
- * To receive all multicast frames, the hash register should be set with all ones and the
- * multicast hash enable bit should be set in the network configuration register.
- */
-
-/*
- * Return the hash index value for the specified address.
- */
-static int hash_get_index(__u8 *addr)
-{
- int i, j, bitval;
- int hash_index = 0;
-
- for (j = 0; j < 6; j++) {
- for (i = 0, bitval = 0; i < 8; i++)
- bitval ^= hash_bit_value(i*6 + j, addr);
-
- hash_index |= (bitval << j);
- }
-
- return hash_index;
-}
+/* ................................ MAC ................................ */
/*
- * Add multicast addresses to the internal multicast-hash table.
+ * Initialize and start the Receiver and Transmit subsystems
*/
-static void at91ether_sethashtable(struct net_device *dev)
+static int at91ether_start(struct net_device *dev)
{
- struct at91_private *lp = netdev_priv(dev);
- struct netdev_hw_addr *ha;
- unsigned long mc_filter[2];
- unsigned int bitnr;
-
- mc_filter[0] = mc_filter[1] = 0;
-
- netdev_for_each_mc_addr(ha, dev) {
- bitnr = hash_get_index(ha->addr);
- mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
- }
-
- at91_emac_write(lp, AT91_EMAC_HSL, mc_filter[0]);
- at91_emac_write(lp, AT91_EMAC_HSH, mc_filter[1]);
-}
+ struct macb *lp = netdev_priv(dev);
+ unsigned long ctl;
+ dma_addr_t addr;
+ int i;
-/*
- * Enable/Disable promiscuous and multicast modes.
- */
-static void at91ether_set_multicast_list(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- unsigned long cfg;
-
- cfg = at91_emac_read(lp, AT91_EMAC_CFG);
-
- if (dev->flags & IFF_PROMISC) /* Enable promiscuous mode */
- cfg |= AT91_EMAC_CAF;
- else if (dev->flags & (~IFF_PROMISC)) /* Disable promiscuous mode */
- cfg &= ~AT91_EMAC_CAF;
-
- if (dev->flags & IFF_ALLMULTI) { /* Enable all multicast mode */
- at91_emac_write(lp, AT91_EMAC_HSH, -1);
- at91_emac_write(lp, AT91_EMAC_HSL, -1);
- cfg |= AT91_EMAC_MTI;
- } else if (!netdev_mc_empty(dev)) { /* Enable specific multicasts */
- at91ether_sethashtable(dev);
- cfg |= AT91_EMAC_MTI;
- } else if (dev->flags & (~IFF_ALLMULTI)) { /* Disable all multicast mode */
- at91_emac_write(lp, AT91_EMAC_HSH, 0);
- at91_emac_write(lp, AT91_EMAC_HSL, 0);
- cfg &= ~AT91_EMAC_MTI;
+ lp->rx_ring = dma_alloc_coherent(&lp->pdev->dev,
+ MAX_RX_DESCR * sizeof(struct dma_desc),
+ &lp->rx_ring_dma, GFP_KERNEL);
+ if (!lp->rx_ring) {
+ netdev_err(lp->dev, "unable to alloc rx ring DMA buffer\n");
+ return -ENOMEM;
}
- at91_emac_write(lp, AT91_EMAC_CFG, cfg);
-}
-
-/* ......................... ETHTOOL SUPPORT ........................... */
-
-static int mdio_read(struct net_device *dev, int phy_id, int location)
-{
- struct at91_private *lp = netdev_priv(dev);
- unsigned int value;
-
- read_phy(lp, phy_id, location, &value);
- return value;
-}
-
-static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
-{
- struct at91_private *lp = netdev_priv(dev);
+ lp->rx_buffers = dma_alloc_coherent(&lp->pdev->dev,
+ MAX_RX_DESCR * MAX_RBUFF_SZ,
+ &lp->rx_buffers_dma, GFP_KERNEL);
+ if (!lp->rx_buffers) {
+ netdev_err(lp->dev, "unable to alloc rx data DMA buffer\n");
- write_phy(lp, phy_id, location, value);
-}
-
-static int at91ether_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct at91_private *lp = netdev_priv(dev);
- int ret;
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- ret = mii_ethtool_gset(&lp->mii, cmd);
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-
- if (lp->phy_media == PORT_FIBRE) { /* override media type since mii.c doesn't know */
- cmd->supported = SUPPORTED_FIBRE;
- cmd->port = PORT_FIBRE;
+ dma_free_coherent(&lp->pdev->dev,
+ MAX_RX_DESCR * sizeof(struct dma_desc),
+ lp->rx_ring, lp->rx_ring_dma);
+ lp->rx_ring = NULL;
+ return -ENOMEM;
}
- return ret;
-}
-
-static int at91ether_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct at91_private *lp = netdev_priv(dev);
- int ret;
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- ret = mii_ethtool_sset(&lp->mii, cmd);
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-
- return ret;
-}
-
-static int at91ether_nwayreset(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- int ret;
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
-
- ret = mii_nway_restart(&lp->mii);
-
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-
- return ret;
-}
-
-static void at91ether_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
- strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
- strlcpy(info->version, DRV_VERSION, sizeof(info->version));
- strlcpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info));
-}
-
-static const struct ethtool_ops at91ether_ethtool_ops = {
- .get_settings = at91ether_get_settings,
- .set_settings = at91ether_set_settings,
- .get_drvinfo = at91ether_get_drvinfo,
- .nway_reset = at91ether_nwayreset,
- .get_link = ethtool_op_get_link,
-};
-
-static int at91ether_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct at91_private *lp = netdev_priv(dev);
- int res;
-
- if (!netif_running(dev))
- return -EINVAL;
-
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
- res = generic_mii_ioctl(&lp->mii, if_mii(rq), cmd, NULL);
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-
- return res;
-}
-
-/* ................................ MAC ................................ */
-
-/*
- * Initialize and start the Receiver and Transmit subsystems
- */
-static void at91ether_start(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- struct recv_desc_bufs *dlist, *dlist_phys;
- int i;
- unsigned long ctl;
-
- dlist = lp->dlist;
- dlist_phys = lp->dlist_phys;
-
+ addr = lp->rx_buffers_dma;
for (i = 0; i < MAX_RX_DESCR; i++) {
- dlist->descriptors[i].addr = (unsigned int) &dlist_phys->recv_buf[i][0];
- dlist->descriptors[i].size = 0;
+ lp->rx_ring[i].addr = addr;
+ lp->rx_ring[i].ctrl = 0;
+ addr += MAX_RBUFF_SZ;
}
/* Set the Wrap bit on the last descriptor */
- dlist->descriptors[i-1].addr |= EMAC_DESC_WRAP;
+ lp->rx_ring[MAX_RX_DESCR - 1].addr |= MACB_BIT(RX_WRAP);
/* Reset buffer index */
- lp->rxBuffIndex = 0;
+ lp->rx_tail = 0;
/* Program address of descriptor list in Rx Buffer Queue register */
- at91_emac_write(lp, AT91_EMAC_RBQP, (unsigned long) dlist_phys);
+ macb_writel(lp, RBQP, lp->rx_ring_dma);
/* Enable Receive and Transmit */
- ctl = at91_emac_read(lp, AT91_EMAC_CTL);
- at91_emac_write(lp, AT91_EMAC_CTL, ctl | AT91_EMAC_RE | AT91_EMAC_TE);
+ ctl = macb_readl(lp, NCR);
+ macb_writel(lp, NCR, ctl | MACB_BIT(RE) | MACB_BIT(TE));
+
+ return 0;
}
/*
@@ -774,38 +205,34 @@ static void at91ether_start(struct net_device *dev)
*/
static int at91ether_open(struct net_device *dev)
{
- struct at91_private *lp = netdev_priv(dev);
+ struct macb *lp = netdev_priv(dev);
unsigned long ctl;
+ int ret;
if (!is_valid_ether_addr(dev->dev_addr))
return -EADDRNOTAVAIL;
- clk_enable(lp->ether_clk); /* Re-enable Peripheral clock */
-
/* Clear internal statistics */
- ctl = at91_emac_read(lp, AT91_EMAC_CTL);
- at91_emac_write(lp, AT91_EMAC_CTL, ctl | AT91_EMAC_CSR);
+ ctl = macb_readl(lp, NCR);
+ macb_writel(lp, NCR, ctl | MACB_BIT(CLRSTAT));
/* Update the MAC address (incase user has changed it) */
update_mac_address(dev);
- /* Enable PHY interrupt */
- enable_phyirq(dev);
+ ret = at91ether_start(dev);
+ if (ret)
+ return ret;
/* Enable MAC interrupts */
- at91_emac_write(lp, AT91_EMAC_IER, AT91_EMAC_RCOM | AT91_EMAC_RBNA
- | AT91_EMAC_TUND | AT91_EMAC_RTRY | AT91_EMAC_TCOM
- | AT91_EMAC_ROVR | AT91_EMAC_ABT);
-
- /* Determine current link speed */
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
- update_linkspeed(dev, 0);
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
-
- at91ether_start(dev);
+ macb_writel(lp, IER, MACB_BIT(RCOMP) | MACB_BIT(RXUBR)
+ | MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE) | MACB_BIT(TCOMP)
+ | MACB_BIT(ISR_ROVR) | MACB_BIT(HRESP));
+
+ /* schedule a link state check */
+ phy_start(lp->phy_dev);
+
netif_start_queue(dev);
+
return 0;
}
@@ -814,24 +241,30 @@ static int at91ether_open(struct net_device *dev)
*/
static int at91ether_close(struct net_device *dev)
{
- struct at91_private *lp = netdev_priv(dev);
+ struct macb *lp = netdev_priv(dev);
unsigned long ctl;
/* Disable Receiver and Transmitter */
- ctl = at91_emac_read(lp, AT91_EMAC_CTL);
- at91_emac_write(lp, AT91_EMAC_CTL, ctl & ~(AT91_EMAC_TE | AT91_EMAC_RE));
-
- /* Disable PHY interrupt */
- disable_phyirq(dev);
+ ctl = macb_readl(lp, NCR);
+ macb_writel(lp, NCR, ctl & ~(MACB_BIT(TE) | MACB_BIT(RE)));
/* Disable MAC interrupts */
- at91_emac_write(lp, AT91_EMAC_IDR, AT91_EMAC_RCOM | AT91_EMAC_RBNA
- | AT91_EMAC_TUND | AT91_EMAC_RTRY | AT91_EMAC_TCOM
- | AT91_EMAC_ROVR | AT91_EMAC_ABT);
+ macb_writel(lp, IDR, MACB_BIT(RCOMP) | MACB_BIT(RXUBR)
+ | MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE)
+ | MACB_BIT(TCOMP) | MACB_BIT(ISR_ROVR)
+ | MACB_BIT(HRESP));
netif_stop_queue(dev);
- clk_disable(lp->ether_clk); /* Disable Peripheral clock */
+ dma_free_coherent(&lp->pdev->dev,
+ MAX_RX_DESCR * sizeof(struct dma_desc),
+ lp->rx_ring, lp->rx_ring_dma);
+ lp->rx_ring = NULL;
+
+ dma_free_coherent(&lp->pdev->dev,
+ MAX_RX_DESCR * MAX_RBUFF_SZ,
+ lp->rx_buffers, lp->rx_buffers_dma);
+ lp->rx_buffers = NULL;
return 0;
}
@@ -841,9 +274,9 @@ static int at91ether_close(struct net_device *dev)
*/
static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct at91_private *lp = netdev_priv(dev);
+ struct macb *lp = netdev_priv(dev);
- if (at91_emac_read(lp, AT91_EMAC_TSR) & AT91_EMAC_TSR_BNQ) {
+ if (macb_readl(lp, TSR) & MACB_BIT(RM9200_BNQ)) {
netif_stop_queue(dev);
/* Store packet information (to free when Tx completed) */
@@ -853,9 +286,9 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
dev->stats.tx_bytes += skb->len;
/* Set address of the data in the Transmit Address register */
- at91_emac_write(lp, AT91_EMAC_TAR, lp->skb_physaddr);
+ macb_writel(lp, TAR, lp->skb_physaddr);
/* Set length of the packet in the Transmit Control register */
- at91_emac_write(lp, AT91_EMAC_TCR, skb->len);
+ macb_writel(lp, TCR, skb->len);
} else {
printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n");
@@ -872,32 +305,32 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
*/
static struct net_device_stats *at91ether_stats(struct net_device *dev)
{
- struct at91_private *lp = netdev_priv(dev);
+ struct macb *lp = netdev_priv(dev);
int ale, lenerr, seqe, lcol, ecol;
if (netif_running(dev)) {
- dev->stats.rx_packets += at91_emac_read(lp, AT91_EMAC_OK); /* Good frames received */
- ale = at91_emac_read(lp, AT91_EMAC_ALE);
+ dev->stats.rx_packets += macb_readl(lp, FRO); /* Good frames received */
+ ale = macb_readl(lp, ALE);
dev->stats.rx_frame_errors += ale; /* Alignment errors */
- lenerr = at91_emac_read(lp, AT91_EMAC_ELR) + at91_emac_read(lp, AT91_EMAC_USF);
+ lenerr = macb_readl(lp, ELE) + macb_readl(lp, USF);
dev->stats.rx_length_errors += lenerr; /* Excessive Length or Undersize Frame error */
- seqe = at91_emac_read(lp, AT91_EMAC_SEQE);
+ seqe = macb_readl(lp, FCSE);
dev->stats.rx_crc_errors += seqe; /* CRC error */
- dev->stats.rx_fifo_errors += at91_emac_read(lp, AT91_EMAC_DRFC);/* Receive buffer not available */
+ dev->stats.rx_fifo_errors += macb_readl(lp, RRE);/* Receive buffer not available */
dev->stats.rx_errors += (ale + lenerr + seqe
- + at91_emac_read(lp, AT91_EMAC_CDE) + at91_emac_read(lp, AT91_EMAC_RJB));
+ + macb_readl(lp, RSE) + macb_readl(lp, RJA));
- dev->stats.tx_packets += at91_emac_read(lp, AT91_EMAC_FRA); /* Frames successfully transmitted */
- dev->stats.tx_fifo_errors += at91_emac_read(lp, AT91_EMAC_TUE); /* Transmit FIFO underruns */
- dev->stats.tx_carrier_errors += at91_emac_read(lp, AT91_EMAC_CSE); /* Carrier Sense errors */
- dev->stats.tx_heartbeat_errors += at91_emac_read(lp, AT91_EMAC_SQEE);/* Heartbeat error */
+ dev->stats.tx_packets += macb_readl(lp, FTO); /* Frames successfully transmitted */
+ dev->stats.tx_fifo_errors += macb_readl(lp, TUND); /* Transmit FIFO underruns */
+ dev->stats.tx_carrier_errors += macb_readl(lp, CSE); /* Carrier Sense errors */
+ dev->stats.tx_heartbeat_errors += macb_readl(lp, STE);/* Heartbeat error */
- lcol = at91_emac_read(lp, AT91_EMAC_LCOL);
- ecol = at91_emac_read(lp, AT91_EMAC_ECOL);
+ lcol = macb_readl(lp, LCOL);
+ ecol = macb_readl(lp, EXCOL);
dev->stats.tx_window_errors += lcol; /* Late collisions */
dev->stats.tx_aborted_errors += ecol; /* 16 collisions */
- dev->stats.collisions += (at91_emac_read(lp, AT91_EMAC_SCOL) + at91_emac_read(lp, AT91_EMAC_MCOL) + lcol + ecol);
+ dev->stats.collisions += (macb_readl(lp, SCF) + macb_readl(lp, MCF) + lcol + ecol);
}
return &dev->stats;
}
@@ -908,38 +341,38 @@ static struct net_device_stats *at91ether_stats(struct net_device *dev)
*/
static void at91ether_rx(struct net_device *dev)
{
- struct at91_private *lp = netdev_priv(dev);
- struct recv_desc_bufs *dlist;
+ struct macb *lp = netdev_priv(dev);
unsigned char *p_recv;
struct sk_buff *skb;
unsigned int pktlen;
- dlist = lp->dlist;
- while (dlist->descriptors[lp->rxBuffIndex].addr & EMAC_DESC_DONE) {
- p_recv = dlist->recv_buf[lp->rxBuffIndex];
- pktlen = dlist->descriptors[lp->rxBuffIndex].size & 0x7ff; /* Length of frame including FCS */
+ while (lp->rx_ring[lp->rx_tail].addr & MACB_BIT(RX_USED)) {
+ p_recv = lp->rx_buffers + lp->rx_tail * MAX_RBUFF_SZ;
+ pktlen = MACB_BF(RX_FRMLEN, lp->rx_ring[lp->rx_tail].ctrl);
skb = netdev_alloc_skb(dev, pktlen + 2);
- if (skb != NULL) {
+ if (skb) {
skb_reserve(skb, 2);
memcpy(skb_put(skb, pktlen), p_recv, pktlen);
skb->protocol = eth_type_trans(skb, dev);
dev->stats.rx_bytes += pktlen;
netif_rx(skb);
- }
- else {
+ } else {
dev->stats.rx_dropped += 1;
- printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
+ netdev_notice(dev, "Memory squeeze, dropping packet.\n");
}
- if (dlist->descriptors[lp->rxBuffIndex].size & EMAC_MULTICAST)
+ if (lp->rx_ring[lp->rx_tail].ctrl & MACB_BIT(RX_MHASH_MATCH))
dev->stats.multicast++;
- dlist->descriptors[lp->rxBuffIndex].addr &= ~EMAC_DESC_DONE; /* reset ownership bit */
- if (lp->rxBuffIndex == MAX_RX_DESCR-1) /* wrap after last buffer */
- lp->rxBuffIndex = 0;
+ /* reset ownership bit */
+ lp->rx_ring[lp->rx_tail].addr &= ~MACB_BIT(RX_USED);
+
+ /* wrap after last buffer */
+ if (lp->rx_tail == MAX_RX_DESCR - 1)
+ lp->rx_tail = 0;
else
- lp->rxBuffIndex++;
+ lp->rx_tail++;
}
}
@@ -949,19 +382,19 @@ static void at91ether_rx(struct net_device *dev)
static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *) dev_id;
- struct at91_private *lp = netdev_priv(dev);
+ struct macb *lp = netdev_priv(dev);
unsigned long intstatus, ctl;
/* MAC Interrupt Status register indicates what interrupts are pending.
It is automatically cleared once read. */
- intstatus = at91_emac_read(lp, AT91_EMAC_ISR);
+ intstatus = macb_readl(lp, ISR);
- if (intstatus & AT91_EMAC_RCOM) /* Receive complete */
+ if (intstatus & MACB_BIT(RCOMP)) /* Receive complete */
at91ether_rx(dev);
- if (intstatus & AT91_EMAC_TCOM) { /* Transmit complete */
+ if (intstatus & MACB_BIT(TCOMP)) { /* Transmit complete */
/* The TCOM bit is set even if the transmission failed. */
- if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY))
+ if (intstatus & (MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE)))
dev->stats.tx_errors += 1;
if (lp->skb) {
@@ -973,13 +406,13 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
}
/* Work-around for Errata #11 */
- if (intstatus & AT91_EMAC_RBNA) {
- ctl = at91_emac_read(lp, AT91_EMAC_CTL);
- at91_emac_write(lp, AT91_EMAC_CTL, ctl & ~AT91_EMAC_RE);
- at91_emac_write(lp, AT91_EMAC_CTL, ctl | AT91_EMAC_RE);
+ if (intstatus & MACB_BIT(RXUBR)) {
+ ctl = macb_readl(lp, NCR);
+ macb_writel(lp, NCR, ctl & ~MACB_BIT(RE));
+ macb_writel(lp, NCR, ctl | MACB_BIT(RE));
}
- if (intstatus & AT91_EMAC_ROVR)
+ if (intstatus & MACB_BIT(ISR_ROVR))
printk("%s: ROVR error\n", dev->name);
return IRQ_HANDLED;
@@ -1001,9 +434,9 @@ static const struct net_device_ops at91ether_netdev_ops = {
.ndo_stop = at91ether_close,
.ndo_start_xmit = at91ether_start_xmit,
.ndo_get_stats = at91ether_stats,
- .ndo_set_rx_mode = at91ether_set_multicast_list,
+ .ndo_set_rx_mode = macb_set_rx_mode,
.ndo_set_mac_address = set_mac_address,
- .ndo_do_ioctl = at91ether_ioctl,
+ .ndo_do_ioctl = macb_ioctl,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -1011,48 +444,6 @@ static const struct net_device_ops at91ether_netdev_ops = {
#endif
};
-/*
- * Detect the PHY type, and its address.
- */
-static int __init at91ether_phy_detect(struct at91_private *lp)
-{
- unsigned int phyid1, phyid2;
- unsigned long phy_id;
- unsigned short phy_address = 0;
-
- while (phy_address < PHY_MAX_ADDR) {
- /* Read the PHY ID registers */
- enable_mdi(lp);
- read_phy(lp, phy_address, MII_PHYSID1, &phyid1);
- read_phy(lp, phy_address, MII_PHYSID2, &phyid2);
- disable_mdi(lp);
-
- phy_id = (phyid1 << 16) | (phyid2 & 0xfff0);
- switch (phy_id) {
- case MII_DM9161_ID: /* Davicom 9161: PHY_ID1 = 0x181, PHY_ID2 = B881 */
- case MII_DM9161A_ID: /* Davicom 9161A: PHY_ID1 = 0x181, PHY_ID2 = B8A0 */
- case MII_LXT971A_ID: /* Intel LXT971A: PHY_ID1 = 0x13, PHY_ID2 = 78E0 */
- case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
- case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
- case MII_DP83847_ID: /* National Semiconductor DP83847: */
- case MII_DP83848_ID: /* National Semiconductor DP83848: */
- case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
- case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
- case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
- case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
- /* store detected values */
- lp->phy_type = phy_id; /* Type of PHY connected */
- lp->phy_address = phy_address; /* MDI address of PHY */
- return 1;
- }
-
- phy_address++;
- }
-
- return 0; /* not detected */
-}
-
-
/*
* Detect MAC & PHY and perform ethernet interface initialization
*/
@@ -1061,147 +452,91 @@ static int __init at91ether_probe(struct platform_device *pdev)
struct macb_platform_data *board_data = pdev->dev.platform_data;
struct resource *regs;
struct net_device *dev;
- struct at91_private *lp;
+ struct phy_device *phydev;
+ struct macb *lp;
int res;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs)
return -ENOENT;
- dev = alloc_etherdev(sizeof(struct at91_private));
+ dev = alloc_etherdev(sizeof(struct macb));
if (!dev)
return -ENOMEM;
lp = netdev_priv(dev);
+ lp->pdev = pdev;
+ lp->dev = dev;
lp->board_data = *board_data;
spin_lock_init(&lp->lock);
dev->base_addr = regs->start; /* physical base address */
- lp->emac_base = ioremap(regs->start, regs->end - regs->start + 1);
- if (!lp->emac_base) {
+ lp->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
+ if (!lp->regs) {
res = -ENOMEM;
goto err_free_dev;
}
/* Clock */
- lp->ether_clk = clk_get(&pdev->dev, "ether_clk");
- if (IS_ERR(lp->ether_clk)) {
- res = PTR_ERR(lp->ether_clk);
- goto err_ioumap;
+ lp->pclk = devm_clk_get(&pdev->dev, "ether_clk");
+ if (IS_ERR(lp->pclk)) {
+ res = PTR_ERR(lp->pclk);
+ goto err_free_dev;
}
- clk_enable(lp->ether_clk);
+ clk_enable(lp->pclk);
/* Install the interrupt handler */
dev->irq = platform_get_irq(pdev, 0);
- if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) {
- res = -EBUSY;
+ res = devm_request_irq(&pdev->dev, dev->irq, at91ether_interrupt, 0, dev->name, dev);
+ if (res)
goto err_disable_clock;
- }
-
- /* Allocate memory for DMA Receive descriptors */
- lp->dlist = (struct recv_desc_bufs *) dma_alloc_coherent(NULL, sizeof(struct recv_desc_bufs), (dma_addr_t *) &lp->dlist_phys, GFP_KERNEL);
- if (lp->dlist == NULL) {
- res = -ENOMEM;
- goto err_free_irq;
- }
ether_setup(dev);
dev->netdev_ops = &at91ether_netdev_ops;
- dev->ethtool_ops = &at91ether_ethtool_ops;
+ dev->ethtool_ops = &macb_ethtool_ops;
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
get_mac_address(dev); /* Get ethernet address and store it in dev->dev_addr */
update_mac_address(dev); /* Program ethernet address into MAC */
- at91_emac_write(lp, AT91_EMAC_CTL, 0);
-
- if (board_data->is_rmii)
- at91_emac_write(lp, AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG | AT91_EMAC_RMII);
- else
- at91_emac_write(lp, AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG);
+ macb_writel(lp, NCR, 0);
- /* Detect PHY */
- if (!at91ether_phy_detect(lp)) {
- printk(KERN_ERR "at91_ether: Could not detect ethernet PHY\n");
- res = -ENODEV;
- goto err_free_dmamem;
+ if (board_data->is_rmii) {
+ macb_writel(lp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG) | MACB_BIT(RM9200_RMII));
+ lp->phy_interface = PHY_INTERFACE_MODE_RMII;
+ } else {
+ macb_writel(lp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG));
+ lp->phy_interface = PHY_INTERFACE_MODE_MII;
}
- initialize_phy(lp);
-
- lp->mii.dev = dev; /* Support for ethtool */
- lp->mii.mdio_read = mdio_read;
- lp->mii.mdio_write = mdio_write;
- lp->mii.phy_id = lp->phy_address;
- lp->mii.phy_id_mask = 0x1f;
- lp->mii.reg_num_mask = 0x1f;
-
/* Register the network interface */
res = register_netdev(dev);
if (res)
- goto err_free_dmamem;
-
- /* Determine current link speed */
- spin_lock_irq(&lp->lock);
- enable_mdi(lp);
- update_linkspeed(dev, 0);
- disable_mdi(lp);
- spin_unlock_irq(&lp->lock);
+ goto err_disable_clock;
+
+ if (macb_mii_init(lp) != 0)
+ goto err_out_unregister_netdev;
+
netif_carrier_off(dev); /* will be enabled in open() */
- /* If board has no PHY IRQ, use a timer to poll the PHY */
- if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
- gpio_request(board_data->phy_irq_pin, "ethernet_phy");
- } else {
- /* If board has no PHY IRQ, use a timer to poll the PHY */
- init_timer(&lp->check_timer);
- lp->check_timer.data = (unsigned long)dev;
- lp->check_timer.function = at91ether_check_link;
- }
+ phydev = lp->phy_dev;
+ netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
+ phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
/* Display ethernet banner */
printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%pM)\n",
dev->name, (uint) dev->base_addr, dev->irq,
- at91_emac_read(lp, AT91_EMAC_CFG) & AT91_EMAC_SPD ? "100-" : "10-",
- at91_emac_read(lp, AT91_EMAC_CFG) & AT91_EMAC_FD ? "FullDuplex" : "HalfDuplex",
+ macb_readl(lp, NCFGR) & MACB_BIT(SPD) ? "100-" : "10-",
+ macb_readl(lp, NCFGR) & MACB_BIT(FD) ? "FullDuplex" : "HalfDuplex",
dev->dev_addr);
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID))
- printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)");
- else if (lp->phy_type == MII_LXT971A_ID)
- printk(KERN_INFO "%s: Intel LXT971A PHY\n", dev->name);
- else if (lp->phy_type == MII_RTL8201_ID)
- printk(KERN_INFO "%s: Realtek RTL8201(B)L PHY\n", dev->name);
- else if (lp->phy_type == MII_BCM5221_ID)
- printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name);
- else if (lp->phy_type == MII_DP83847_ID)
- printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name);
- else if (lp->phy_type == MII_DP83848_ID)
- printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
- else if (lp->phy_type == MII_AC101L_ID)
- printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
- else if (lp->phy_type == MII_KS8721_ID)
- printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
- else if (lp->phy_type == MII_T78Q21x3_ID)
- printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name);
- else if (lp->phy_type == MII_LAN83C185_ID)
- printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name);
-
- clk_disable(lp->ether_clk); /* Disable Peripheral clock */
return 0;
-
-err_free_dmamem:
- platform_set_drvdata(pdev, NULL);
- dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
-err_free_irq:
- free_irq(dev->irq, dev);
+err_out_unregister_netdev:
+ unregister_netdev(dev);
err_disable_clock:
- clk_disable(lp->ether_clk);
- clk_put(lp->ether_clk);
-err_ioumap:
- iounmap(lp->emac_base);
+ clk_disable(lp->pclk);
err_free_dev:
free_netdev(dev);
return res;
@@ -1210,18 +545,19 @@ static int __init at91ether_probe(struct platform_device *pdev)
static int __devexit at91ether_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
- struct at91_private *lp = netdev_priv(dev);
+ struct macb *lp = netdev_priv(dev);
- if (gpio_is_valid(lp->board_data.phy_irq_pin))
- gpio_free(lp->board_data.phy_irq_pin);
+ if (lp->phy_dev)
+ phy_disconnect(lp->phy_dev);
+ mdiobus_unregister(lp->mii_bus);
+ kfree(lp->mii_bus->irq);
+ mdiobus_free(lp->mii_bus);
unregister_netdev(dev);
- free_irq(dev->irq, dev);
- dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
- clk_put(lp->ether_clk);
-
- platform_set_drvdata(pdev, NULL);
+ clk_disable(lp->pclk);
free_netdev(dev);
+ platform_set_drvdata(pdev, NULL);
+
return 0;
}
@@ -1230,18 +566,13 @@ static int __devexit at91ether_remove(struct platform_device *pdev)
static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
{
struct net_device *net_dev = platform_get_drvdata(pdev);
- struct at91_private *lp = netdev_priv(net_dev);
+ struct macb *lp = netdev_priv(net_dev);
if (netif_running(net_dev)) {
- if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
- int phy_irq = gpio_to_irq(lp->board_data.phy_irq_pin);
- disable_irq(phy_irq);
- }
-
netif_stop_queue(net_dev);
netif_device_detach(net_dev);
- clk_disable(lp->ether_clk);
+ clk_disable(lp->pclk);
}
return 0;
}
@@ -1249,18 +580,13 @@ static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
static int at91ether_resume(struct platform_device *pdev)
{
struct net_device *net_dev = platform_get_drvdata(pdev);
- struct at91_private *lp = netdev_priv(net_dev);
+ struct macb *lp = netdev_priv(net_dev);
if (netif_running(net_dev)) {
- clk_enable(lp->ether_clk);
+ clk_enable(lp->pclk);
netif_device_attach(net_dev);
netif_start_queue(net_dev);
-
- if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
- int phy_irq = gpio_to_irq(lp->board_data.phy_irq_pin);
- enable_irq(phy_irq);
- }
}
return 0;
}
diff --git a/drivers/net/ethernet/cadence/at91_ether.h b/drivers/net/ethernet/cadence/at91_ether.h
deleted file mode 100644
index 0ef6328fa7f80993103a518dbede34c051a72b5a..0000000000000000000000000000000000000000
--- a/drivers/net/ethernet/cadence/at91_ether.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Ethernet driver for the Atmel AT91RM9200 (Thunder)
- *
- * Copyright (C) SAN People (Pty) Ltd
- *
- * Based on an earlier Atmel EMAC macrocell driver by Atmel and Lineo Inc.
- * Initial version by Rick Bronson.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef AT91_ETHERNET
-#define AT91_ETHERNET
-
-
-/* Davicom 9161 PHY */
-#define MII_DM9161_ID 0x0181b880
-#define MII_DM9161A_ID 0x0181b8a0
-#define MII_DSCR_REG 16
-#define MII_DSCSR_REG 17
-#define MII_DSINTR_REG 21
-
-/* Intel LXT971A PHY */
-#define MII_LXT971A_ID 0x001378E0
-#define MII_ISINTE_REG 18
-#define MII_ISINTS_REG 19
-#define MII_LEDCTRL_REG 20
-
-/* Realtek RTL8201 PHY */
-#define MII_RTL8201_ID 0x00008200
-
-/* Broadcom BCM5221 PHY */
-#define MII_BCM5221_ID 0x004061e0
-#define MII_BCMINTR_REG 26
-
-/* National Semiconductor DP83847 */
-#define MII_DP83847_ID 0x20005c30
-
-/* National Semiconductor DP83848 */
-#define MII_DP83848_ID 0x20005c90
-#define MII_DPPHYSTS_REG 16
-#define MII_DPMICR_REG 17
-#define MII_DPMISR_REG 18
-
-/* Altima AC101L PHY */
-#define MII_AC101L_ID 0x00225520
-
-/* Micrel KS8721 PHY */
-#define MII_KS8721_ID 0x00221610
-
-/* Teridian 78Q2123/78Q2133 */
-#define MII_T78Q21x3_ID 0x000e7230
-#define MII_T78Q21INT_REG 17
-
-/* SMSC LAN83C185 */
-#define MII_LAN83C185_ID 0x0007C0A0
-
-/* ........................................................................ */
-
-#define MAX_RBUFF_SZ 0x600 /* 1518 rounded up */
-#define MAX_RX_DESCR 9 /* max number of receive buffers */
-
-#define EMAC_DESC_DONE 0x00000001 /* bit for if DMA is done */
-#define EMAC_DESC_WRAP 0x00000002 /* bit for wrap */
-
-#define EMAC_BROADCAST 0x80000000 /* broadcast address */
-#define EMAC_MULTICAST 0x40000000 /* multicast address */
-#define EMAC_UNICAST 0x20000000 /* unicast address */
-
-struct rbf_t
-{
- unsigned int addr;
- unsigned long size;
-};
-
-struct recv_desc_bufs
-{
- struct rbf_t descriptors[MAX_RX_DESCR]; /* must be on sizeof (rbf_t) boundary */
- char recv_buf[MAX_RX_DESCR][MAX_RBUFF_SZ]; /* must be on long boundary */
-};
-
-struct at91_private
-{
- struct mii_if_info mii; /* ethtool support */
- struct macb_platform_data board_data; /* board-specific
- * configuration (shared with
- * macb for common data */
- void __iomem *emac_base; /* base register address */
- struct clk *ether_clk; /* clock */
-
- /* PHY */
- unsigned long phy_type; /* type of PHY (PHY_ID) */
- spinlock_t lock; /* lock for MDI interface */
- short phy_media; /* media interface type */
- unsigned short phy_address; /* 5-bit MDI address of PHY (0..31) */
- struct timer_list check_timer; /* Poll link status */
-
- /* Transmit */
- struct sk_buff *skb; /* holds skb until xmit interrupt completes */
- dma_addr_t skb_physaddr; /* phys addr from pci_map_single */
- int skb_length; /* saved skb length for pci_unmap_single */
-
- /* Receive */
- int rxBuffIndex; /* index into receive descriptor list */
- struct recv_desc_bufs *dlist; /* descriptor list address */
- struct recv_desc_bufs *dlist_phys; /* descriptor list physical address */
-};
-
-#endif
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 033064b7b576ad9199702d0a515331dda141fe41..6c84a1104aff5a55496c6bb037c053172bcfe88e 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -228,7 +228,7 @@ static int macb_mii_probe(struct net_device *dev)
return 0;
}
-static int macb_mii_init(struct macb *bp)
+int macb_mii_init(struct macb *bp)
{
struct macb_platform_data *pdata;
int err = -ENXIO, i;
@@ -284,6 +284,7 @@ static int macb_mii_init(struct macb *bp)
err_out:
return err;
}
+EXPORT_SYMBOL_GPL(macb_mii_init);
static void macb_update_stats(struct macb *bp)
{
@@ -996,7 +997,7 @@ static void macb_sethashtable(struct net_device *dev)
/*
* Enable/Disable promiscuous and multicast modes.
*/
-static void macb_set_rx_mode(struct net_device *dev)
+void macb_set_rx_mode(struct net_device *dev)
{
unsigned long cfg;
struct macb *bp = netdev_priv(dev);
@@ -1028,6 +1029,7 @@ static void macb_set_rx_mode(struct net_device *dev)
macb_writel(bp, NCFGR, cfg);
}
+EXPORT_SYMBOL_GPL(macb_set_rx_mode);
static int macb_open(struct net_device *dev)
{
@@ -1214,15 +1216,16 @@ static void macb_get_drvinfo(struct net_device *dev,
strcpy(info->bus_info, dev_name(&bp->pdev->dev));
}
-static const struct ethtool_ops macb_ethtool_ops = {
+const struct ethtool_ops macb_ethtool_ops = {
.get_settings = macb_get_settings,
.set_settings = macb_set_settings,
.get_drvinfo = macb_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_ts_info = ethtool_op_get_ts_info,
};
+EXPORT_SYMBOL_GPL(macb_ethtool_ops);
-static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct macb *bp = netdev_priv(dev);
struct phy_device *phydev = bp->phy_dev;
@@ -1235,6 +1238,7 @@ static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
return phy_mii_ioctl(phydev, rq, cmd);
}
+EXPORT_SYMBOL_GPL(macb_ioctl);
static const struct net_device_ops macb_netdev_ops = {
.ndo_open = macb_open,
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 335e288f53140159e2f1956a716713b69c03933a..a3627517ec9533005e10bc57ef7e41cae49d18d1 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -14,6 +14,8 @@
#define MACB_NCR 0x0000
#define MACB_NCFGR 0x0004
#define MACB_NSR 0x0008
+#define MACB_TAR 0x000c /* AT91RM9200 only */
+#define MACB_TCR 0x0010 /* AT91RM9200 only */
#define MACB_TSR 0x0014
#define MACB_RBQP 0x0018
#define MACB_TBQP 0x001c
@@ -133,6 +135,8 @@
#define MACB_RTY_SIZE 1
#define MACB_PAE_OFFSET 13
#define MACB_PAE_SIZE 1
+#define MACB_RM9200_RMII_OFFSET 13 /* AT91RM9200 only */
+#define MACB_RM9200_RMII_SIZE 1 /* AT91RM9200 only */
#define MACB_RBOF_OFFSET 14
#define MACB_RBOF_SIZE 2
#define MACB_RLCE_OFFSET 16
@@ -178,6 +182,8 @@
#define MACB_TGO_SIZE 1
#define MACB_BEX_OFFSET 4
#define MACB_BEX_SIZE 1
+#define MACB_RM9200_BNQ_OFFSET 4 /* AT91RM9200 only */
+#define MACB_RM9200_BNQ_SIZE 1 /* AT91RM9200 only */
#define MACB_COMP_OFFSET 5
#define MACB_COMP_SIZE 1
#define MACB_UND_OFFSET 6
@@ -534,8 +540,24 @@ struct macb {
unsigned int duplex;
phy_interface_t phy_interface;
+
+ /* at91_private */
+ struct macb_platform_data board_data; /* board-specific
+ * configuration (shared with
+ * macb for common data */
+
+ /* Transmit */
+ struct sk_buff *skb; /* holds skb until xmit interrupt completes */
+ dma_addr_t skb_physaddr; /* phys addr from pci_map_single */
+ int skb_length; /* saved skb length for pci_unmap_single */
};
+extern const struct ethtool_ops macb_ethtool_ops;
+
+int macb_mii_init(struct macb *bp);
+int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+void macb_set_rx_mode(struct net_device *dev);
+
static inline bool macb_is_gem(struct macb *bp)
{
return MACB_BFEXT(IDNUM, macb_readl(bp, MID)) == 0x2;