From cd6c524e9e0b5ad8ce52bc3b4a3a1e272e3a8410 Mon Sep 17 00:00:00 2001 From: Dmitry TARNYAGIN <dmitry.tarnyagin@stericsson.com> Date: Mon, 12 Dec 2011 12:58:43 +0100 Subject: [PATCH] mac80211: Do not request FIF_BCN_PRBRESP_PROMISC for HW scan. ieee80211_configure_filter code used local->scanning as a boolean value when it was a bit mask. Bits SCAN_COMPLETED, SCAN_ABORTED should not set FIF_BCN_PRBRESP_PROMISC filter. SCAN_HW_SCANNING should not set FIF_BCN_PRBRESP_PROMISC either, as there is no explicit filter configuration request from scan code. If a driver requires FIF_BCN_PRBRESP_PROMISC mode during HW scanning, it's up to the driver to temporary enable it. Similar mistake was fixed also in ieee80211_hw_config (power configuration code). Verified-by: Vitaly Wool <vitaly.wool@sonyericsson.com> Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> --- net/mac80211/main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 60198ac664a00..1455836257185 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -47,7 +47,7 @@ void ieee80211_configure_filter(struct ieee80211_local *local) if (atomic_read(&local->iff_allmultis)) new_flags |= FIF_ALLMULTI; - if (local->monitors || local->scanning) + if (local->monitors || test_bit(SCAN_SW_SCANNING, &local->scanning)) new_flags |= FIF_BCN_PRBRESP_PROMISC; if (local->fif_probe_req || local->probe_req_reg) @@ -150,8 +150,8 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) changed |= IEEE80211_CONF_CHANGE_SMPS; } - if ((local->scanning & SCAN_SW_SCANNING) || - (local->scanning & SCAN_HW_SCANNING)) + if (test_bit(SCAN_SW_SCANNING, &local->scanning) || + test_bit(SCAN_HW_SCANNING, &local->scanning)) power = chan->max_power; else power = local->power_constr_level ? -- GitLab