Commit cc5859ca authored by Soby Mathew's avatar Soby Mathew

Multi-console: Deprecate the `finish_console_register` macro

The `finish_console_register` macro is used by the multi console
framework to register the `console_t` driver callbacks. It relied
on weak references to the `ldr` instruction to populate 0 to the
callback in case the driver has not defined the appropriate
function. Use of `ldr` instruction to load absolute address to a
reference makes the binary position dependant. These instructions
should be replaced with adrp/adr instruction for position independant
executable(PIE). But adrp/adr instructions don't work well with weak
references as described in GNU ld bugzilla issue 22589.

This patch defines a new version of `finish_console_register` macro
which can spcify which driver callbacks are valid and deprecates the
old one. If any of the argument is not specified, then the macro
populates 0 for that callback. Hence the functionality of the previous
deprecated macro is preserved. The USE_FINISH_CONSOLE_REG_2 define
is used to select the new variant of the macro and will be removed
once the deprecated variant is removed.

All the upstream console drivers have been migrated to use the new
macro in this patch.

NOTE: Platforms be aware that the new variant of the
`finish_console_register` should be used and the old variant is
deprecated.

Change-Id: Ia6a67aaf2aa3ba93932992d683587bbd0ad25259
Signed-off-by: default avatarSoby Mathew <soby.mathew@arm.com>
parent 0595abce
......@@ -6,6 +6,7 @@
#include <arch.h>
#include <asm_macros.S>
#include <assert_macros.S>
#define USE_FINISH_CONSOLE_REG_2
#include <console_macros.S>
#include <pl011.h>
......@@ -116,7 +117,7 @@ func console_pl011_register
mov r0, r4
pop {r4, lr}
finish_console_register pl011
finish_console_register pl011 putc=1, getc=1, flush=1
register_fail:
pop {r4, pc}
......
......@@ -6,6 +6,7 @@
#include <arch.h>
#include <asm_macros.S>
#include <assert_macros.S>
#define USE_FINISH_CONSOLE_REG_2
#include <console_macros.S>
#include <pl011.h>
......@@ -110,7 +111,7 @@ func console_pl011_register
mov x0, x6
mov x30, x7
finish_console_register pl011
finish_console_register pl011 putc=1, getc=1, flush=1
register_fail:
ret x7
......
......@@ -7,6 +7,8 @@
#include <asm_macros.S>
#include <assert_macros.S>
#include <cadence/cdns_uart.h>
#define USE_FINISH_CONSOLE_REG_2
#include <console_macros.S>
/*
* "core" functions are low-level implementations that don't require
......@@ -77,7 +79,7 @@ func console_cdns_register
mov x0, x6
mov x30, v7
finish_console_register cdns
finish_console_register cdns putc=1, getc=1, flush=1
register_fail:
ret x7
......
......@@ -4,6 +4,7 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <asm_macros.S>
#define USE_FINISH_CONSOLE_REG_2
#include <console_macros.S>
/*
......@@ -60,8 +61,12 @@ func console_xxx_register
* Keep console_t pointer in x0 for later.
*/
/* Macro to finish up registration and return (needs valid x0 + x30). */
finish_console_register xxx
/*
* Macro to finish up registration and return (needs valid x0 + x30).
* If any of the argument is unspecified, then the corresponding
* entry in console_t is set to 0.
*/
finish_console_register xxx putc=1, getc=1, flush=1
/* Jump here if hardware init fails or parameters are invalid. */
register_fail:
......
......@@ -6,6 +6,7 @@
#include <asm_macros.S>
#include <cbmem_console.h>
#define USE_FINISH_CONSOLE_REG_2
#include <console_macros.S>
/*
......@@ -39,7 +40,7 @@ func console_cbmc_register
ldr w2, [x0]
str w2, [x1, #CONSOLE_T_CBMC_SIZE]
mov x0, x1
finish_console_register cbmc
finish_console_register cbmc putc=1, flush=1
endfunc console_cbmc_register
/* -----------------------------------------------
......
......@@ -7,6 +7,7 @@
#include <arch.h>
#include <asm_macros.S>
#include <assert_macros.S>
#define USE_FINISH_CONSOLE_REG_2
#include <console_macros.S>
#include <uart_16550.h>
......@@ -112,7 +113,7 @@ func console_16550_register
mov x0, x6
mov x30, x7
finish_console_register 16550
finish_console_register 16550 putc=1, getc=1, flush=1
register_fail:
ret x7
......
......@@ -17,6 +17,14 @@
* with a tail call that will include return to the caller.
* REQUIRES console_t pointer in x0 and a valid return address in x30.
*/
/*
* The USE_FINISH_CONSOLE_REG_2 guard is introduced to allow selection between
* the 2 variants of the finish_console_register macro and will be removed
* once the deprecated variant is removed.
*/
#ifndef USE_FINISH_CONSOLE_REG_2
#if !ERROR_DEPRECATED
/* This version of the macro is deprecated. Use the new version */
.macro finish_console_register _driver
/*
* Add these weak definitions so we will automatically write a 0 if the
......@@ -39,5 +47,38 @@
str r1, [r0, #CONSOLE_T_FLAGS]
b console_register
.endm
#endif /* ERROR_DEPRECATED */
#else /* USE_FINISH_CONSOLE_REG_2 */
/* The new version of the macro not using weak references */
.macro finish_console_register _driver, putc=0, getc=0, flush=0
/*
* If any of the callback is not specified or set as 0, then the
* corresponding callback entry in console_t is set to 0.
*/
.ifne \putc
ldr r1, =console_\_driver\()_putc
.else
mov r1, #0
.endif
str r1, [r0, #CONSOLE_T_PUTC]
.ifne \getc
ldr r1, =console_\_driver\()_getc
.else
mov r1, #0
.endif
str r1, [r0, #CONSOLE_T_GETC]
.ifne \flush
ldr r1, =console_\_driver\()_flush
.else
mov r1, #0
.endif
str r1, [r0, #CONSOLE_T_FLUSH]
mov r1, #(CONSOLE_FLAG_BOOT | CONSOLE_FLAG_CRASH)
str r1, [r0, #CONSOLE_T_FLAGS]
b console_register
.endm
#endif /* USE_FINISH_CONSOLE_REG_2 */
#endif /* __CONSOLE_MACROS_S__ */
/*
* Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
......@@ -17,6 +17,14 @@
* with a tail call that will include return to the caller.
* REQUIRES console_t pointer in x0 and a valid return address in x30.
*/
/*
* The USE_FINISH_CONSOLE_REG_2 guard is introduced to allow selection between
* the 2 variants of the finish_console_register macro and will be removed
* once the deprecated variant is removed.
*/
#ifndef USE_FINISH_CONSOLE_REG_2
#if !ERROR_DEPRECATED
/* This version of the macro is deprecated. Use the new version */
.macro finish_console_register _driver
/*
* Add these weak definitions so we will automatically write a 0 if the
......@@ -39,5 +47,41 @@
str x1, [x0, #CONSOLE_T_FLAGS]
b console_register
.endm
#endif /* ERROR_DEPRECATED */
#else /* USE_FINISH_CONSOLE_REG_2 */
/* The new version of the macro not using weak references */
.macro finish_console_register _driver, putc=0, getc=0, flush=0
/*
* If any of the callback is not specified or set as 0, then the
* corresponding callback entry in console_t is set to 0.
*/
.ifne \putc
adrp x1, console_\_driver\()_putc
add x1, x1, :lo12:console_\_driver\()_putc
str x1, [x0, #CONSOLE_T_PUTC]
.else
str xzr, [x0, #CONSOLE_T_PUTC]
.endif
.ifne \getc
adrp x1, console_\_driver\()_getc
add x1, x1, :lo12:console_\_driver\()_getc
str x1, [x0, #CONSOLE_T_GETC]
.else
str xzr, [x0, #CONSOLE_T_GETC]
.endif
.ifne \flush
adrp x1, console_\_driver\()_flush
add x1, x1, :lo12:console_\_driver\()_flush
str x1, [x0, #CONSOLE_T_FLUSH]
.else
str xzr, [x0, #CONSOLE_T_FLUSH]
.endif
mov x1, #(CONSOLE_FLAG_BOOT | CONSOLE_FLAG_CRASH)
str x1, [x0, #CONSOLE_T_FLAGS]
b console_register
.endm
#endif /* USE_FINISH_CONSOLE_REG_2 */
#endif /* __CONSOLE_MACROS_S__ */
......@@ -6,6 +6,7 @@
#include <arch.h>
#include <asm_macros.S>
#define USE_FINISH_CONSOLE_REG_2
#include <console_macros.S>
#include <assert_macros.S>
#include "imx8_lpuart.h"
......@@ -26,7 +27,7 @@ func console_lpuart_register
mov x0, x6
mov x30, x7
finish_console_register lpuart
finish_console_register lpuart putc=1, getc=1
register_fail:
ret x7
......
......@@ -6,6 +6,7 @@
#include <arch.h>
#include <asm_macros.S>
#define USE_FINISH_CONSOLE_REG_2
#include <console_macros.S>
#include <assert_macros.S>
#include "ls_16550.h"
......@@ -106,7 +107,7 @@ func console_ls_16550_register
mov x0, x6
mov x30, x7
finish_console_register ls_16550
finish_console_register ls_16550 putc=1, getc=1, flush=1
register_fail:
ret x7
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment