start.S 14.2 KB
Newer Older
1 2 3 4 5
/*
 *  armboot - Startup Code for ARM926EJS CPU-core
 *
 *  Copyright (c) 2003  Texas Instruments
 *
wdenk's avatar
wdenk committed
6
 *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
7 8 9
 *
 *  Copyright (c) 2001	Marius Grger <mag@sysgo.de>
 *  Copyright (c) 2002	Alex Zpke <azu@sysgo.de>
10
 *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
11 12
 *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
 *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
13
 *  Copyright (c) 2010	Albert Aribaud <albert.aribaud@free.fr>
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

34
#include <asm-offsets.h>
35
#include <config.h>
36
#include <common.h>
37 38 39 40
#include <version.h>

#if defined(CONFIG_OMAP1610)
#include <./configs/omap1510.h>
wdenk's avatar
wdenk committed
41 42
#elif defined(CONFIG_OMAP730)
#include <./configs/omap730.h>
43 44 45 46 47 48 49 50 51 52 53 54 55 56
#endif

/*
 *************************************************************************
 *
 * Jump vector table as in table 3.1 in [1]
 *
 *************************************************************************
 */


.globl _start
_start:
	b	reset
57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77
#ifdef CONFIG_PRELOADER
/* No exception handlers in preloader */
	ldr	pc, _hang
	ldr	pc, _hang
	ldr	pc, _hang
	ldr	pc, _hang
	ldr	pc, _hang
	ldr	pc, _hang
	ldr	pc, _hang

_hang:
	.word	do_hang
/* pad to 64 byte boundary */
	.word	0x12345678
	.word	0x12345678
	.word	0x12345678
	.word	0x12345678
	.word	0x12345678
	.word	0x12345678
	.word	0x12345678
#else
78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
	ldr	pc, _undefined_instruction
	ldr	pc, _software_interrupt
	ldr	pc, _prefetch_abort
	ldr	pc, _data_abort
	ldr	pc, _not_used
	ldr	pc, _irq
	ldr	pc, _fiq

_undefined_instruction:
	.word undefined_instruction
_software_interrupt:
	.word software_interrupt
_prefetch_abort:
	.word prefetch_abort
_data_abort:
	.word data_abort
_not_used:
	.word not_used
_irq:
	.word irq
_fiq:
	.word fiq

101
#endif	/* CONFIG_PRELOADER */
102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117
	.balignl 16,0xdeadbeef


/*
 *************************************************************************
 *
 * Startup Code (reset vector)
 *
 * do important init only if we don't start from memory!
 * setup Memory and board specific bits prior to relocation.
 * relocate armboot to ram
 * setup stack
 *
 *************************************************************************
 */

118
.globl _TEXT_BASE
119
_TEXT_BASE:
120
	.word	CONFIG_SYS_TEXT_BASE
121 122

/*
wdenk's avatar
wdenk committed
123
 * These are defined in the board-specific linker script.
124 125 126
 * Subtracting _start from them lets the linker put their
 * relative position in the executable instead of leaving
 * them null.
127
 */
128 129 130
.globl _bss_start_ofs
_bss_start_ofs:
	.word __bss_start - _start
wdenk's avatar
wdenk committed
131

132 133 134
.globl _bss_end_ofs
_bss_end_ofs:
	.word _end - _start
135 136 137 138 139 140 141 142 143 144 145 146 147

#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
.globl IRQ_STACK_START
IRQ_STACK_START:
	.word	0x0badc0de

/* IRQ stack memory (calculated at run-time) */
.globl FIQ_STACK_START
FIQ_STACK_START:
	.word 0x0badc0de
#endif

148 149 150 151 152 153
#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
/* IRQ stack memory (calculated at run-time) + 8 bytes */
.globl IRQ_STACK_START_IN
IRQ_STACK_START_IN:
	.word	0x0badc0de

154 155 156 157 158 159 160 161 162 163 164 165 166 167
/*
 * the actual reset code
 */

reset:
	/*
	 * set the cpu to SVC32 mode
	 */
	mrs	r0,cpsr
	bic	r0,r0,#0x1f
	orr	r0,r0,#0xd3
	msr	cpsr,r0

	/*
wdenk's avatar
wdenk committed
168 169
	 * we do sys-critical inits only at reboot,
	 * not when booting from ram!
170
	 */
wdenk's avatar
wdenk committed
171
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
wdenk's avatar
wdenk committed
172 173 174
	bl	cpu_init_crit
#endif

175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
	ldr	r0,=0x00000000
	bl	board_init_f

/*------------------------------------------------------------------------------*/

/*
 * void relocate_code (addr_sp, gd, addr_moni)
 *
 * This "function" does not return, instead it continues in RAM
 * after relocating the monitor code.
 *
 */
	.globl	relocate_code
relocate_code:
	mov	r4, r0	/* save addr_sp */
	mov	r5, r1	/* save addr of gd */
	mov	r6, r2	/* save addr of destination */
	mov	r7, r2	/* save addr of destination */

	/* Set up the stack						    */
stack_setup:
	mov	sp, r4

	adr	r0, _start
	ldr	r2, _TEXT_BASE
203 204
	ldr	r3, _bss_start_ofs
	add	r2, r0, r3		/* r2 <- source end address	    */
205 206 207 208 209 210 211
	cmp	r0, r6
	beq	clear_bss

#ifndef CONFIG_SKIP_RELOCATE_UBOOT
copy_loop:
	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
212 213
	cmp	r0, r2			/* until source end address [r2]    */
	blo	copy_loop
214 215

#ifndef CONFIG_PRELOADER
216 217 218 219 220 221 222 223 224 225 226
	/*
	 * fix .rel.dyn relocations
	 */
	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
	sub	r9, r7, r0		/* r9 <- relocation offset */
	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
	add	r10, r10, r0		/* r10 <- sym table in FLASH */
	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
227
fixloop:
228 229
	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
230 231
	ldr	r1, [r2, #4]
	and	r8, r1, #0xff
232
	cmp	r8, #23			/* relative fixup? */
233
	beq	fixrel
234
	cmp	r8, #2			/* absolute fixup? */
235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250
	beq	fixabs
	/* ignore unknown type of fixup */
	b	fixnext
fixabs:
	/* absolute fix: set location to (offset) symbol value */
	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
	add	r1, r10, r1		/* r1 <- address of symbol in table */
	ldr	r1, [r1, #4]		/* r1 <- symbol value */
	add	r1, r9			/* r1 <- relocated sym addr */
	b	fixnext
fixrel:
	/* relative fix: increase location by offset */
	ldr	r1, [r0]
	add	r1, r1, r9
fixnext:
	str	r1, [r0]
251
	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
252
	cmp	r2, r3
253
	blo	fixloop
254 255 256 257 258
#endif
#endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */

clear_bss:
#ifndef CONFIG_PRELOADER
259 260
	ldr	r0, _bss_start_ofs
	ldr	r1, _bss_end_ofs
261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280
	ldr	r3, _TEXT_BASE		/* Text base */
	mov	r4, r7			/* reloc addr */
	add	r0, r0, r4
	add	r1, r1, r4
	mov	r2, #0x00000000		/* clear			    */

clbss_l:str	r2, [r0]		/* clear loop...		    */
	add	r0, r0, #4
	cmp	r0, r1
	bne	clbss_l

	bl coloured_LED_init
	bl red_LED_on
#endif

/*
 * We are done. Do not return, instead branch to second part of board
 * initialization, now running from RAM.
 */
#ifdef CONFIG_NAND_SPL
281
	ldr     r0, _nand_boot_ofs
282
	mov	pc, r0
283

284 285
_nand_boot_ofs:
	.word nand_boot
286
#else
287 288 289 290
	ldr	r0, _board_init_r_ofs
	adr	r1, _start
	add	r0, r0, r1
	add	lr, r0, r9
291 292 293 294 295 296
	/* setup parameters for board_init_r */
	mov	r0, r5		/* gd_t */
	mov	r1, r7		/* dest_addr */
	/* jump to it ... */
	mov	pc, lr

297 298
_board_init_r_ofs:
	.word board_init_r - _start
299 300
#endif

301 302 303 304 305 306 307
_rel_dyn_start_ofs:
	.word __rel_dyn_start - _start
_rel_dyn_end_ofs:
	.word __rel_dyn_end - _start
_dynsym_start_ofs:
	.word __dynsym_start - _start

308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329
#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
/*
 * the actual reset code
 */

reset:
	/*
	 * set the cpu to SVC32 mode
	 */
	mrs	r0,cpsr
	bic	r0,r0,#0x1f
	orr	r0,r0,#0xd3
	msr	cpsr,r0

	/*
	 * we do sys-critical inits only at reboot,
	 * not when booting from ram!
	 */
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
	bl	cpu_init_crit
#endif

wdenk's avatar
wdenk committed
330
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
wdenk's avatar
wdenk committed
331 332 333 334 335
relocate:				/* relocate U-Boot to RAM	    */
	adr	r0, _start		/* r0 <- current position of code   */
	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
	cmp     r0, r1                  /* don't reloc during debug         */
	beq     stack_setup
336 337
	ldr	r3, _bss_start_ofs	/* r3 <- _bss_start - _start	    */
	add	r2, r0, r3		/* r2 <- source end address         */
338 339

copy_loop:
wdenk's avatar
wdenk committed
340 341
	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
342 343
	cmp	r0, r2			/* until source end address [r2]    */
	blo	copy_loop
wdenk's avatar
wdenk committed
344
#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
345

wdenk's avatar
wdenk committed
346 347 348
	/* Set up the stack						    */
stack_setup:
	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
349 350
	sub	sp, r0, #128		/* leave 32 words for abort-stack   */
#ifndef CONFIG_PRELOADER
351
	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
352
	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo                        */
wdenk's avatar
wdenk committed
353 354 355
#ifdef CONFIG_USE_IRQ
	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
#endif
356
#endif /* CONFIG_PRELOADER */
wdenk's avatar
wdenk committed
357
	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
Vitaly Kuzmichev's avatar
Vitaly Kuzmichev committed
358
	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
359

wdenk's avatar
wdenk committed
360
clear_bss:
361 362 363 364 365
	adr	r2, _start
	ldr	r0, _bss_start_ofs	/* find start of bss segment        */
	add	r0, r0, r2
	ldr	r1, _bss_end_ofs	/* stop here                        */
	add	r1, r1, r2
Wolfgang Denk's avatar
Wolfgang Denk committed
366
	mov	r2, #0x00000000		/* clear                            */
wdenk's avatar
wdenk committed
367

368
#ifndef CONFIG_PRELOADER
wdenk's avatar
wdenk committed
369 370 371
clbss_l:str	r2, [r0]		/* clear loop...                    */
	add	r0, r0, #4
	cmp	r0, r1
372
	blo	clbss_l
wdenk's avatar
wdenk committed
373

Stelian Pop's avatar
Stelian Pop committed
374 375
	bl coloured_LED_init
	bl red_LED_on
376
#endif /* CONFIG_PRELOADER */
Stelian Pop's avatar
Stelian Pop committed
377

378 379 380 381
	ldr	r0, _start_armboot_ofs
	adr	r1, _start
	add	r0, r0, r1
	ldr	pc, r0
382

383
_start_armboot_ofs:
384
#ifdef CONFIG_NAND_SPL
385
	.word nand_boot - _start
386
#else
387
	.word start_armboot - _start
388
#endif /* CONFIG_NAND_SPL */
389
#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */
390 391 392 393 394 395 396 397 398 399 400

/*
 *************************************************************************
 *
 * CPU_init_critical registers
 *
 * setup important registers
 * setup memory timing
 *
 *************************************************************************
 */
401
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423
cpu_init_crit:
	/*
	 * flush v4 I/D caches
	 */
	mov	r0, #0
	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */

	/*
	 * disable MMU stuff and caches
	 */
	mrc	p15, 0, r0, c1, c0, 0
	bic	r0, r0, #0x00002300	/* clear bits 13, 9:8 (--V- --RS) */
	bic	r0, r0, #0x00000087	/* clear bits 7, 2:0 (B--- -CAM) */
	orr	r0, r0, #0x00000002	/* set bit 2 (A) Align */
	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
	mcr	p15, 0, r0, c1, c0, 0

	/*
	 * Go setup Memory and board specific bits prior to relocation.
	 */
	mov	ip, lr		/* perserve link reg across call */
424
	bl	lowlevel_init	/* go setup pll,mux,memory */
425 426
	mov	lr, ip		/* restore link */
	mov	pc, lr		/* back to my caller */
427 428
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */

429
#ifndef CONFIG_PRELOADER
430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474
/*
 *************************************************************************
 *
 * Interrupt handling
 *
 *************************************************************************
 */

@
@ IRQ stack frame.
@
#define S_FRAME_SIZE	72

#define S_OLD_R0	68
#define S_PSR		64
#define S_PC		60
#define S_LR		56
#define S_SP		52

#define S_IP		48
#define S_FP		44
#define S_R10		40
#define S_R9		36
#define S_R8		32
#define S_R7		28
#define S_R6		24
#define S_R5		20
#define S_R4		16
#define S_R3		12
#define S_R2		8
#define S_R1		4
#define S_R0		0

#define MODE_SVC 0x13
#define I_BIT	 0x80

/*
 * use bad_save_user_regs for abort/prefetch/undef/swi ...
 * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
 */

	.macro	bad_save_user_regs
	@ carve out a frame on current user stack
	sub	sp, sp, #S_FRAME_SIZE
	stmia	sp, {r0 - r12}	@ Save user registers (now in svc mode) r0-r12
475
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
476
	adr	r2, _start
477
	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
478
	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
479 480 481
#else
	ldr	r2, IRQ_STACK_START_IN
#endif
482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512
	@ get values for "aborted" pc and cpsr (into parm regs)
	ldmia	r2, {r2 - r3}
	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
	add	r5, sp, #S_SP
	mov	r1, lr
	stmia	r5, {r0 - r3}	@ save sp_SVC, lr_SVC, pc, cpsr
	mov	r0, sp		@ save current stack into r0 (param register)
	.endm

	.macro	irq_save_user_regs
	sub	sp, sp, #S_FRAME_SIZE
	stmia	sp, {r0 - r12}			@ Calling r0-r12
	@ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
	add	r8, sp, #S_PC
	stmdb	r8, {sp, lr}^		@ Calling SP, LR
	str	lr, [r8, #0]		@ Save calling PC
	mrs	r6, spsr
	str	r6, [r8, #4]		@ Save CPSR
	str	r0, [r8, #8]		@ Save OLD_R0
	mov	r0, sp
	.endm

	.macro	irq_restore_user_regs
	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
	mov	r0, r0
	ldr	lr, [sp, #S_PC]			@ Get PC
	add	sp, sp, #S_FRAME_SIZE
	subs	pc, lr, #4		@ return & move spsr_svc into cpsr
	.endm

	.macro get_bad_stack
513
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
514
	adr	r13, _start		@ setup our mode stack
515
	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
516
	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
517 518 519
#else
	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
#endif
520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537

	str	lr, [r13]	@ save caller lr in position 0 of saved stack
	mrs	lr, spsr	@ get the spsr
	str	lr, [r13, #4]	@ save spsr in position 1 of saved stack
	mov	r13, #MODE_SVC	@ prepare SVC-Mode
	@ msr	spsr_c, r13
	msr	spsr, r13	@ switch modes, make sure moves will execute
	mov	lr, pc		@ capture return pc
	movs	pc, lr		@ jump to next instruction & switch modes.
	.endm

	.macro get_irq_stack			@ setup IRQ stack
	ldr	sp, IRQ_STACK_START
	.endm

	.macro get_fiq_stack			@ setup FIQ stack
	ldr	sp, FIQ_STACK_START
	.endm
538
#endif	/* CONFIG_PRELOADER */
539 540 541 542

/*
 * exception handlers
 */
543 544 545 546 547 548 549
#ifdef CONFIG_PRELOADER
	.align	5
do_hang:
	ldr	sp, _TEXT_BASE			/* switch to abort stack */
1:
	bl	1b				/* hang and never return */
#else	/* !CONFIG_PRELOADER */
550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585
	.align  5
undefined_instruction:
	get_bad_stack
	bad_save_user_regs
	bl	do_undefined_instruction

	.align	5
software_interrupt:
	get_bad_stack
	bad_save_user_regs
	bl	do_software_interrupt

	.align	5
prefetch_abort:
	get_bad_stack
	bad_save_user_regs
	bl	do_prefetch_abort

	.align	5
data_abort:
	get_bad_stack
	bad_save_user_regs
	bl	do_data_abort

	.align	5
not_used:
	get_bad_stack
	bad_save_user_regs
	bl	do_not_used

#ifdef CONFIG_USE_IRQ

	.align	5
irq:
	get_irq_stack
	irq_save_user_regs
Wolfgang Denk's avatar
Wolfgang Denk committed
586
	bl	do_irq
587 588 589 590 591 592 593
	irq_restore_user_regs

	.align	5
fiq:
	get_fiq_stack
	/* someone ought to write a more effiction fiq_save_user_regs */
	irq_save_user_regs
Wolfgang Denk's avatar
Wolfgang Denk committed
594
	bl	do_fiq
595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611
	irq_restore_user_regs

#else

	.align	5
irq:
	get_bad_stack
	bad_save_user_regs
	bl	do_irq

	.align	5
fiq:
	get_bad_stack
	bad_save_user_regs
	bl	do_fiq

#endif
612
#endif	/* CONFIG_PRELOADER */