vcma9.c 6.28 KB
Newer Older
wdenk's avatar
wdenk committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74
/*
 * (C) Copyright 2002
 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 * Marius Groeger <mgroeger@sysgo.de>
 *
 * (C) Copyright 2002
 * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <s3c2410.h>
#include <i2c.h>

#include "vcma9.h"
#include "../common/common_util.h"

/* ------------------------------------------------------------------------- */

#define FCLK_SPEED 1

#if FCLK_SPEED==0		/* Fout = 203MHz, Fin = 12MHz for Audio */
#define M_MDIV	0xC3
#define M_PDIV	0x4
#define M_SDIV	0x1
#elif FCLK_SPEED==1		/* Fout = 202.8MHz */
#define M_MDIV	0xA1
#define M_PDIV	0x3
#define M_SDIV	0x1
#endif

#define USB_CLOCK 1

#if USB_CLOCK==0
#define U_M_MDIV	0xA1
#define U_M_PDIV	0x3
#define U_M_SDIV	0x1
#elif USB_CLOCK==1
#define U_M_MDIV	0x48
#define U_M_PDIV	0x3
#define U_M_SDIV	0x2
#endif

static inline void delay(unsigned long loops)
{
	__asm__ volatile ("1:\n"
	  "subs %0, %1, #1\n"
	  "bne 1b":"=r" (loops):"0" (loops));
}

/*
 * Miscellaneous platform dependent initialisations
 */

int board_init(void)
{
	DECLARE_GLOBAL_DATA_PTR;
wdenk's avatar
wdenk committed
75 76
	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
wdenk's avatar
wdenk committed
77 78

	/* to reduce PLL lock time, adjust the LOCKTIME register */
wdenk's avatar
wdenk committed
79
	clk_power->LOCKTIME = 0xFFFFFF;
wdenk's avatar
wdenk committed
80 81

	/* configure MPLL */
wdenk's avatar
wdenk committed
82
	clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
wdenk's avatar
wdenk committed
83 84 85 86 87

	/* some delay between MPLL and UPLL */
	delay (4000);

	/* configure UPLL */
wdenk's avatar
wdenk committed
88
	clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
wdenk's avatar
wdenk committed
89 90 91 92 93

	/* some delay between MPLL and UPLL */
	delay (8000);

	/* set up the I/O ports */
wdenk's avatar
wdenk committed
94 95 96 97 98 99 100 101 102 103 104 105 106 107 108
	gpio->GPACON = 0x007FFFFF;
	gpio->GPBCON = 0x002AAAAA;
	gpio->GPBUP = 0x000002BF;
	gpio->GPCCON = 0xAAAAAAAA;
	gpio->GPCUP = 0x0000FFFF;
	gpio->GPDCON = 0xAAAAAAAA;
	gpio->GPDUP = 0x0000FFFF;
	gpio->GPECON = 0xAAAAAAAA;
	gpio->GPEUP = 0x000037F7;
	gpio->GPFCON = 0x00000000;
	gpio->GPFUP = 0x00000000;
	gpio->GPGCON = 0xFFEAFF5A;
	gpio->GPGUP = 0x0000F0DC;
	gpio->GPHCON = 0x0028AAAA;
	gpio->GPHUP = 0x00000656;
wdenk's avatar
wdenk committed
109 110

	/* setup correct IRQ modes for NIC */
wdenk's avatar
wdenk committed
111 112 113 114
	gpio->EXTINT2 = (gpio->EXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */

	/* select USB port 2 to be host or device (fix to host for now) */
	gpio->MISCCR |= 0x08;
wdenk's avatar
wdenk committed
115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142

	/* init serial */
	gd->baudrate = CONFIG_BAUDRATE;
	gd->have_console = 1;
	serial_init();

	/* arch number of VCMA9-Board */
	gd->bd->bi_arch_number = 227;

	/* adress of boot parameters */
	gd->bd->bi_boot_params = 0x30000100;

	icache_enable();
	dcache_enable();

	return 0;
}

int dram_init(void)
{
	DECLARE_GLOBAL_DATA_PTR;

	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;

	return 0;
}

wdenk's avatar
wdenk committed
143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186
/*
 * NAND flash initialization.
 */
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
extern void
nand_probe(ulong physadr);


static inline void NF_Reset(void)
{
    int i;

    NF_SetCE(NFCE_LOW);
    NF_Cmd(0xFF);		/* reset command */
    for(i = 0; i < 10; i++);	/* tWB = 100ns. */
    NF_WaitRB();		/* wait 200~500us; */
    NF_SetCE(NFCE_HIGH);
}


static inline void NF_Init(void)
{
#define TACLS   0
#define TWRPH0  3
#define TWRPH1  0
    NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0));
    //nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0);
    // 1  1    1     1,   1      xxx,  r xxx,   r xxx
    // En 512B 4step ECCR nFCE=H tACLS   tWRPH0   tWRPH1

    NF_Reset();
}

void
nand_init(void)
{
	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();

	NF_Init();
	printf("NAND flash probing at 0x%.8lX\n", (ulong)nand);
	nand_probe((ulong)nand);
}
#endif

wdenk's avatar
wdenk committed
187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246
/*
 * Get some Board/PLD Info
 */

static uchar Get_PLD_ID(void)
{
	return(*(volatile uchar *)PLD_ID_REG);
}

static uchar Get_PLD_BOARD(void)
{
	return(*(volatile uchar *)PLD_BOARD_REG);
}

static uchar Get_PLD_Version(void)
{
	return((Get_PLD_ID() >> 4) & 0x0F);
}

static uchar Get_PLD_Revision(void)
{
	return(Get_PLD_ID() & 0x0F);
}

static int Get_Board_Config(void)
{
	uchar config = Get_PLD_BOARD() & 0x03;

	if (config == 3)
	    return 1;
	else
	    return 0;
}

static uchar Get_Board_PCB(void)
{
	return(((Get_PLD_BOARD() >> 4) & 0x03) + 'A');
}

/* ------------------------------------------------------------------------- */

/*
 * Check Board Identity:
 */

int checkboard(void)
{
	unsigned char s[50];
	int i;
	backup_t *b = (backup_t *) s;

	puts("Board: ");

	i = getenv_r("serial#", s, 32);
	if ((i < 0) || strncmp (s, "VCMA9", 5)) {
		get_backup_values (b);
		if (strncmp (b->signature, "MPL\0", 4) != 0) {
			puts ("### No HW ID - assuming VCMA9");
		} else {
			b->serial_name[5] = 0;
wdenk's avatar
wdenk committed
247
			printf ("%s-%d PCB Rev %c SN: %s", b->serial_name, Get_Board_Config(),
wdenk's avatar
wdenk committed
248 249 250 251
					Get_Board_PCB(), &b->serial_name[6]);
		}
	} else {
		s[5] = 0;
wdenk's avatar
wdenk committed
252
		printf ("%s-%d PCB Rev %c SN: %s", s, Get_Board_Config(), Get_Board_PCB(),
wdenk's avatar
wdenk committed
253 254 255 256 257 258 259 260 261 262
				&s[6]);
	}
	printf("\n");
	return(0);
}



void print_vcma9_rev(void)
{
wdenk's avatar
wdenk committed
263
	printf("Board: VCMA9-%d PCB Rev: %c (PLD Ver: %d, Rev: %d)\n",
wdenk's avatar
wdenk committed
264 265 266 267
		Get_Board_Config(), Get_Board_PCB(),
		Get_PLD_Version(), Get_PLD_Revision());
}

wdenk's avatar
wdenk committed
268
extern void mem_test_reloc(void);
wdenk's avatar
wdenk committed
269 270 271

int last_stage_init(void)
{
wdenk's avatar
wdenk committed
272
	mem_test_reloc();
wdenk's avatar
wdenk committed
273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296
	print_vcma9_rev();
	show_stdio_dev();
	check_env();
	return 0;
}

/***************************************************************************
 * some helping routines
 */

int overwrite_console(void)
{
	/* return TRUE if console should be overwritten */
	return 0;
}


/************************************************************************
* Print VCMA9 Info
************************************************************************/
void print_vcma9_info(void)
{
    print_vcma9_rev();
}