serial_zynq.c 6.62 KB
Newer Older
Michal Simek's avatar
Michal Simek committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221
/*
 * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
 * Copyright (C) 2011-2012 Xilinx, Inc. All rights reserved.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <watchdog.h>
#include <asm/io.h>
#include <linux/compiler.h>
#include <serial.h>

#define ZYNQ_UART_SR_TXFULL	0x00000010 /* TX FIFO full */
#define ZYNQ_UART_SR_RXEMPTY	0x00000002 /* RX FIFO empty */

#define ZYNQ_UART_CR_TX_EN	0x00000010 /* TX enabled */
#define ZYNQ_UART_CR_RX_EN	0x00000004 /* RX enabled */
#define ZYNQ_UART_CR_TXRST	0x00000002 /* TX logic reset */
#define ZYNQ_UART_CR_RXRST	0x00000001 /* RX logic reset */

#define ZYNQ_UART_MR_PARITY_NONE	0x00000020  /* No parity mode */

/* Some clock/baud constants */
#define ZYNQ_UART_BDIV	15 /* Default/reset BDIV value */
#define ZYNQ_UART_BASECLK	3125000L /* master / (bdiv + 1) */

struct uart_zynq {
	u32 control; /* Control Register [8:0] */
	u32 mode; /* Mode Register [10:0] */
	u32 reserved1[4];
	u32 baud_rate_gen; /* Baud Rate Generator [15:0] */
	u32 reserved2[4];
	u32 channel_sts; /* Channel Status [11:0] */
	u32 tx_rx_fifo; /* FIFO [15:0] or [7:0] */
	u32 baud_rate_divider; /* Baud Rate Divider [7:0] */
};

static struct uart_zynq *uart_zynq_ports[2] = {
#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR0
	[0] = (struct uart_zynq *)CONFIG_ZYNQ_SERIAL_BASEADDR0,
#endif
#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR1
	[1] = (struct uart_zynq *)CONFIG_ZYNQ_SERIAL_BASEADDR1,
#endif
};

struct uart_zynq_params {
	u32 baudrate;
	u32 clock;
};

static struct uart_zynq_params uart_zynq_ports_param[2] = {
#if defined(CONFIG_ZYNQ_SERIAL_BAUDRATE0) && defined(CONFIG_ZYNQ_SERIAL_CLOCK0)
	[0].baudrate = CONFIG_ZYNQ_SERIAL_BAUDRATE0,
	[0].clock = CONFIG_ZYNQ_SERIAL_CLOCK0,
#endif
#if defined(CONFIG_ZYNQ_SERIAL_BAUDRATE1) && defined(CONFIG_ZYNQ_SERIAL_CLOCK1)
	[1].baudrate = CONFIG_ZYNQ_SERIAL_BAUDRATE1,
	[1].clock = CONFIG_ZYNQ_SERIAL_CLOCK1,
#endif
};

/* Set up the baud rate in gd struct */
static void uart_zynq_serial_setbrg(const int port)
{
	/* Calculation results. */
	unsigned int calc_bauderror, bdiv, bgen;
	unsigned long calc_baud = 0;
	unsigned long baud = uart_zynq_ports_param[port].baudrate;
	unsigned long clock = uart_zynq_ports_param[port].clock;
	struct uart_zynq *regs = uart_zynq_ports[port];

	/*                master clock
	 * Baud rate = ------------------
	 *              bgen * (bdiv + 1)
	 *
	 * Find acceptable values for baud generation.
	 */
	for (bdiv = 4; bdiv < 255; bdiv++) {
		bgen = clock / (baud * (bdiv + 1));
		if (bgen < 2 || bgen > 65535)
			continue;

		calc_baud = clock / (bgen * (bdiv + 1));

		/*
		 * Use first calculated baudrate with
		 * an acceptable (<3%) error
		 */
		if (baud > calc_baud)
			calc_bauderror = baud - calc_baud;
		else
			calc_bauderror = calc_baud - baud;
		if (((calc_bauderror * 100) / baud) < 3)
			break;
	}

	writel(bdiv, &regs->baud_rate_divider);
	writel(bgen, &regs->baud_rate_gen);
}

/* Initialize the UART, with...some settings. */
static int uart_zynq_serial_init(const int port)
{
	struct uart_zynq *regs = uart_zynq_ports[port];

	if (!regs)
		return -1;

	/* RX/TX enabled & reset */
	writel(ZYNQ_UART_CR_TX_EN | ZYNQ_UART_CR_RX_EN | ZYNQ_UART_CR_TXRST | \
					ZYNQ_UART_CR_RXRST, &regs->control);
	writel(ZYNQ_UART_MR_PARITY_NONE, &regs->mode); /* 8 bit, no parity */
	uart_zynq_serial_setbrg(port);

	return 0;
}

static void uart_zynq_serial_putc(const char c, const int port)
{
	struct uart_zynq *regs = uart_zynq_ports[port];

	while ((readl(&regs->channel_sts) & ZYNQ_UART_SR_TXFULL) != 0)
		WATCHDOG_RESET();

	if (c == '\n') {
		writel('\r', &regs->tx_rx_fifo);
		while ((readl(&regs->channel_sts) & ZYNQ_UART_SR_TXFULL) != 0)
			WATCHDOG_RESET();
	}
	writel(c, &regs->tx_rx_fifo);
}

static void uart_zynq_serial_puts(const char *s, const int port)
{
	while (*s)
		uart_zynq_serial_putc(*s++, port);
}

static int uart_zynq_serial_tstc(const int port)
{
	struct uart_zynq *regs = uart_zynq_ports[port];

	return (readl(&regs->channel_sts) & ZYNQ_UART_SR_RXEMPTY) == 0;
}

static int uart_zynq_serial_getc(const int port)
{
	struct uart_zynq *regs = uart_zynq_ports[port];

	while (!uart_zynq_serial_tstc(port))
		WATCHDOG_RESET();
	return readl(&regs->tx_rx_fifo);
}

#if !defined(CONFIG_SERIAL_MULTI)
int serial_init(void)
{
	return uart_zynq_serial_init(0);
}

void serial_setbrg(void)
{
	uart_zynq_serial_setbrg(0);
}

void serial_putc(const char c)
{
	uart_zynq_serial_putc(c, 0);
}

void serial_puts(const char *s)
{
	uart_zynq_serial_puts(s, 0);
}

int serial_getc(void)
{
	return uart_zynq_serial_getc(0);
}

int serial_tstc(void)
{
	return uart_zynq_serial_tstc(0);
}
#else
/* Multi serial device functions */
#define DECLARE_PSSERIAL_FUNCTIONS(port) \
	int uart_zynq##port##_init(void) \
				{ return uart_zynq_serial_init(port); } \
	void uart_zynq##port##_setbrg(void) \
				{ return uart_zynq_serial_setbrg(port); } \
	int uart_zynq##port##_getc(void) \
				{ return uart_zynq_serial_getc(port); } \
	int uart_zynq##port##_tstc(void) \
				{ return uart_zynq_serial_tstc(port); } \
	void uart_zynq##port##_putc(const char c) \
				{ uart_zynq_serial_putc(c, port); } \
	void uart_zynq##port##_puts(const char *s) \
				{ uart_zynq_serial_puts(s, port); }

/* Serial device descriptor */
#define INIT_PSSERIAL_STRUCTURE(port, __name) {	\
	  .name   = __name,			\
222 223
	  .start  = uart_zynq##port##_init,	\
	  .stop   = NULL,			\
Michal Simek's avatar
Michal Simek committed
224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247
	  .setbrg = uart_zynq##port##_setbrg,	\
	  .getc   = uart_zynq##port##_getc,	\
	  .tstc   = uart_zynq##port##_tstc,	\
	  .putc   = uart_zynq##port##_putc,	\
	  .puts   = uart_zynq##port##_puts,	\
}

DECLARE_PSSERIAL_FUNCTIONS(0);
struct serial_device uart_zynq_serial0_device =
	INIT_PSSERIAL_STRUCTURE(0, "ttyPS0");
DECLARE_PSSERIAL_FUNCTIONS(1);
struct serial_device uart_zynq_serial1_device =
	INIT_PSSERIAL_STRUCTURE(1, "ttyPS1");

__weak struct serial_device *default_serial_console(void)
{
	if (uart_zynq_ports[0])
		return &uart_zynq_serial0_device;
	if (uart_zynq_ports[1])
		return &uart_zynq_serial1_device;

	return NULL;
}
#endif